Proposing a New Eco-Friendly Drilling Fluid Additive to Enhance the Filtration Properties of Water-Based Drilling Fluid Systems

2019 ◽  
Author(s):  
Abo Taleb T. Al-Hameedi ◽  
Husam H. Alkinani ◽  
Shari Dunn-Norman ◽  
Mustafa A. Al-Alwani ◽  
Abdullah F. Alshammari ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Fluid Systems ◽  
Water Based ◽  
Filtration Properties

ENVIRONMENTAL DRILLING SOLUTIONS ON THE POLYMERIC BASIS

2020 ◽  
Author(s):  
E.A. Flik ◽  
◽  
Y.E. Kolodyazhnaya
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Oil And Gas Industry ◽  
Environmental Safety ◽  
Drilling Fluids ◽  
Gas Industry ◽  
Fluid Systems ◽  
Water Based

The article assesses the environmental safety of drilling fluids that are currently widely used in the oil and gas industry. It shows active development of water-based drilling fluid systems using xanthan biopolymer.

Design Of Water Based Drilling Fluid Systems For Deepwater Norway

2001 ◽  
Author(s):  
Eirik S. rgård ◽  
Eva Alterås ◽  
Gunnar Fimreite ◽  
Andrew Dzialowski ◽  
Grete S. Svanes
Keyword(s):  
Drilling Fluid ◽  
Fluid Systems ◽  
Water Based

scholarly journals Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid

2019 ◽  
Vol 570 ◽  
pp. 354-367 ◽  
Author(s):  
Pitchayut Dejtaradon ◽  
Hossein Hamidi ◽  
Michael Halim Chuks ◽  
David Wilkinson ◽  
Roozbeh Rafati
Keyword(s):  
Drilling Fluid ◽  
Cuo Nanoparticles ◽  
Water Based ◽  
Filtration Properties

scholarly journals Lubricating Properties of Water-Based Drilling Fluid Improvement Using Lignite NPs as well as Their Effect on Rheological and Filtration Properties

2019 ◽  
Vol 26 (1) ◽  
pp. 81-88
Author(s):  
Massara Salam ◽  
Nada S. Al-Zubaidi ◽  
Asawer A. Al-Wasiti
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Drill String ◽  
Filter Press ◽  
Drilling Fluids ◽  
Well Drilling ◽  
Water Based ◽  
Frictional Forces ◽  
Filtration Properties ◽  
Lubricating Properties

In the process of drilling directional, extended-reach, and horizontal wells, the frictional forces between the drill string and the wellbore or casing can cause severe problems including excessive torque which is one of the most important problems during drilling oil and gas well. Drilling fluid plays an important role by reducing these frictional forces. In this research, an enhancement of lubricating properties of drilling fluids was fundamentally examined by adding Lignite NPs into the water-based drilling fluid. Lubricity, Rheology and filtration properties of water-based drilling fluid were measured at room temperature using OFITE EP and Lubricity Tester, OFITE Model 900 Viscometer, and OFITE Low-Pressure Filter Press, respectively. Lignite NPs were added at different concentrations (0.05 %, 0.1 %, 0.2 %, 0.5 %, and 1 %) by weight into water-based drilling fluid. Lignite NPs showed good reduction in COF of water-based drilling fluid. The enhancement was increased with increasing Lignite NPs concentrations; 23.68%, 35.52%, and 45.3 % reduction in COF were obtained by adding 0.2%, 0.5%, and 1% by weight Lignite NPs concentration, respectively.

Research and Development of a New Type of Water-Based Drilling Fluid

2012 ◽  
Vol 486 ◽  
pp. 464-471
Author(s):  
Kai He Lv ◽  
Tao Shi ◽  
Xue Dong Wu
Keyword(s):  
Drilling Fluid ◽  
Solid Content ◽  
Functional Treatment ◽  
Soluble Salts ◽  
Fluid System ◽  
Water Based ◽  
Treatment Agent ◽  
New Type ◽  
Repeated Use ◽  
Filtration Properties

To solve the problems of conventional water-based drilling fluid, a new type of water-based drilling fluid system that comprises of water, multi-functional treatment agent and soluble salts is developed. Multi-functional treatment agent provides the necessary properties and soluble salt maintains the required density. The composition of the drilling fluid is simple and it is easy to maintain. This new drilling fluid has the advantages of good rheology and filtration properties, strong plugging and inhibiting abilities, low solid content, pollution-free, wide adaptability, easy preparation and repeated use. It is a new type of drilling fluid system.

Insights into the application of new eco-friendly drilling fluid additive to improve the fluid properties in water-based drilling fluid systems

2019 ◽  
Vol 183 ◽  
pp. 106424 ◽  
Author(s):  
Abo Taleb T. Al-Hameedi ◽  
Husam H. Alkinani ◽  
Shari Dunn-Norman ◽  
Mustafa A. Al-Alwani ◽  
Abdullah F. Alshammari ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Fluid Systems ◽  
Water Based ◽  
Fluid Properties

Shear Stress and Filtration Loss Properties Assessment of Nano-Silica Water-Based Drilling Fluid using Machine Learning Approaches

2021 ◽  
pp. 1-33
Author(s):  
Yee Cai Ning ◽  
Syahrir Ridha ◽  
Suhaib Umer Ilyas ◽  
Shwetank Krishna ◽  
Muslim Abdurrahman
Keyword(s):  
Machine Learning ◽  
Experimental Data ◽  
Shear Stress ◽  
Drilling Fluid ◽  
Least Square ◽  
Support Vector ◽  
Learning Approaches ◽  
Filtration Loss ◽  
Water Based ◽  
Filtration Properties

Abstract A complete overview of the rheology and filtration properties of drilling fluids are essential to ensure an efficient transport process with minimized fluid loss. Silica nanoparticle is an excellent additive for rheology and filtration properties enhancement. Existing correlations are not available for nano-SiO2-water-based drilling fluid that can extensively quantify the rheology or filtration loss of nanofluids. Thus, two data-driven machine learning approaches are proposed for prediction, i.e., artificial-neural-network (ANN) and least-square-support-vector-machine (LSSVM). Parameters involved for the prediction of shear stress are SiO2 concentration, temperature, and shear rate, whereas SiO2 nanoparticle concentration, temperature, and time are the inputs to simulate filtration volume. A feed-forward multilayer perceptron is constructed and optimized using the Levenberg-Marquardt learning algorithm. The parameters for the LSSVM are optimized using Couple Simulated Annealing (CSA). The performance of each model is evaluated based on several statistical parameters. The predicted results achieved R2(coefficient of determination) value higher than 0.99 and MAE (mean absolute error) and MAPE (mean absolute percentage error) value below 7% for both the models. The developed models are further validated with experimental data that reveals an excellent agreement between predicted and experimental data.

A Study on the Effects of Date Pit-Based Additive on the Performance of Water-Based Drilling Fluid

2017 ◽  
Vol 140 (5) ◽  
Author(s):  
Jimoh K. Adewole ◽  
Musa O. Najimu
Keyword(s):  
Thermal Stability ◽  
Particle Size ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Date Seed ◽  
Water Based ◽  
Filtration Properties ◽  
Loss Control

This study investigates the effect of using date seed-based additive on the performance of water-based drilling fluids (WBDFs). Specifically, the effects of date pit (DP) fat content, particle size, and DP loading on the drilling fluids density, rheological properties, filtration properties, and thermal stability were investigated. The results showed that dispersion of particles less than 75 μm DP into the WBDFs enhanced the rheological as well as fluid loss control properties. Optimum fluid loss and filter cake thickness can be achieved by addition of 15–20 wt % DP loading to drilling fluid formulation.

Sign in / Sign up

Export Citation Format

Share Document