Analysis and Processing of the Results of Laboratory Experiments to Investigate Fracture Permeability Changes Under the Influence of Mechanochemical Effects of Water Injection into Carbonate Reservoir

2016 ◽  
Author(s):  
S. Popov ◽  
N. Mikhailov ◽  
V. Plotnikov
Keyword(s):  
Laboratory Experiments ◽  
Water Injection ◽  
Carbonate Reservoir ◽  
Fracture Permeability ◽  
Permeability Changes

scholarly journals Injection-production optimization of carbonate reservoir based on an inter-well connectivity model

2021 ◽  
pp. 014459872199465
Author(s):  
Yuhui Zhou ◽  
Sheng Lei ◽  
Xuebiao Du ◽  
Shichang Ju ◽  
Wei Li
Keyword(s):  
History Matching ◽  
Water Injection ◽  
Field Application ◽  
Carbonate Reservoir ◽  
Production Optimization ◽  
Oil Field ◽  
Carbonate Reservoirs ◽  
Utilization Rate ◽  
Production Volume ◽  
Connectivity Model

Carbonate reservoirs are highly heterogeneous. During waterflooding stage, the channeling phenomenon of displacing fluid in high-permeability layers easily leads to early water breakthrough and high water-cut with low recovery rate. To quantitatively characterize the inter-well connectivity parameters (including conductivity and connected volume), we developed an inter-well connectivity model based on the principle of inter-well connectivity and the geological data and development performance of carbonate reservoirs. Thus, the planar water injection allocation factors and water injection utilization rate of different layers can be obtained. In addition, when the proposed model is integrated with automatic history matching method and production optimization algorithm, the real-time oil and water production can be optimized and predicted. Field application demonstrates that adjusting injection parameters based on the model outputs results in a 1.5% increase in annual oil production, which offers significant guidance for the efficient development of similar oil reservoirs. In this study, the connectivity method was applied to multi-layer real reservoirs for the first time, and the injection and production volume of injection-production wells were repeatedly updated based on multiple iterations of water injection efficiency. The correctness of the method was verified by conceptual calculations and then applied to real reservoirs. So that the oil field can increase production in a short time, and has good application value.

Identification of Micro Fractures in Cretaceous Bioclastic Limestone in Iraq and Its Influence on Development of Reservoirs

2021 ◽  
Author(s):  
Genjiu Wang ◽  
Dandan Hu ◽  
Qianyao Li
Keyword(s):  
Water Movement ◽  
Rock Fracture ◽  
Water Injection ◽  
Three Dimensional ◽  
Carbonate Reservoir ◽  
Distribution Data ◽  
Fracture Development ◽  
Reservoir Conditions ◽  
Data Volume ◽  
Southern Iraq

Abstract It is generally believed that Cretaceous bioclastic limestone in Mesopotamia basin in central and southern Iraq is a typical porous reservoir with weak fracture development. Therefore, previous studies on the fracture of this kind of reservoir are rare. As a common seepage channel in carbonate rock, fracture has an important influence on single well productivity and waterflooding development of carbonate reservoir. Based on seismic, core and production data, this study analyzes the development characteristics of fractures from various aspects, and discusses the influence of fractures on water injection development of reservoirs. Through special processing of seismic data, it is found that there are a lot of micro fractures in Cretaceous bioclastic limestone reservoir. Most of these micro fractures are filled fractures without conductivity under the original reservoir conditions. However, with the further development of the reservoir, the reservoir pressure, oil-water movement, water injection and other conditions have changed, resulting in the original reservoir conditions of micro fractures with conductivity. The water cut of many production wells in the high part of reservoir rises sharply. In order to describe the three-dimensional spatial distribution of fractures, the core data is used to verify the seismic fracture distribution data volume. After the verification effect is satisfied, the three-dimensional fracture data volume is transformed into the geological model to establish the permeability field including fracture characteristics. The results of numerical simulation show that water mainly flows into the reservoir through high angle micro fractures. Fractures are identified by seismic and fracture model is established to effectively recognize the influence of micro fractures on water injection development in reservoir development process, which provides important guidance for oilfield development of Cretaceous bioclastic limestone reservoir in the central and southern Iraq fields.

Analysis of the World's First Polymer Injectivity Test in a Carbonate Reservoir Under Extreme Harsh Conditions in ADNOC's Reservoirs

2021 ◽  
Author(s):  
Juan Manuel Leon ◽  
Shehadeh K. Masalmeh ◽  
Siqing Xu ◽  
Ali M. AlSumaiti ◽  
Ahmed A. BinAmro ◽  
...  
Keyword(s):  
High Temperature ◽  
Laboratory Experiments ◽  
High Salinity ◽  
Laboratory Data ◽  
Injection Pressure ◽  
Carbonate Reservoir ◽  
Experimental Program ◽  
Full Field ◽  
Harsh Conditions

Abstract Assessing polymer injectivity for EOR field applications is highly important and challenging. An excessive injectivity reduction during and after polymer injection may potentially affect the well integrity and recovery efficiency and consequently, injection strategy and the economics of the polymer projects. Moreover, well conditions such as skin, completion configuration, and injection water quality can significantly impact polymer injectivity. Additionally, the presence of fractures or micro-fractures may govern injection pressure. In contrast, historic field applications have shown that polymer injectivity is in general better than expected from simulations or laboratory data. In the laboratory experiments, the polymer injectivity has been evaluated by injection of significant amounts of pore volumes of polymer at relevant well-injection rates. In addition, several experiments were performed to measure the complex in-situ rheology expected to dominate the flow near the wellbore This paper presents the analysis of the the world's first polymer injectivity test (PIT) conducted in a high temperature and high salinity (HTHS) carbonate reservoir in Abu Dhabi as part of a comprehensive de-risking program for a new polymer-based EOR scheme proposed by ADNOC for these challenging carbonate reservoirs (see Masalmeh et. al., 2014). The de-risking program includes an extensive laboratory experimental program and field injectivity test to ensure that the identified polymer can be injected and propagated in the target formation before multi-well pilot and full-field implementation stages. Experimental laboratory data and the field injectivity test results are presented in earlier publications (Masalmeh et. al., 2019; Rachapudi et. al., 2020) and references therein. This PIT is the world's first polymer injectivity test in a carbonate reservoir under such harsh conditions of high salinity, high content of divalent ions and high temperature. In addition, the polymer used during the test has never been field-tested before. Therefore, the results of the PIT interpretation will help to de-risk the suitable polymer for the future inter-well pilot for the new proposed EOR Polymer-based scheme and it is a game-changer to unlock several opportunities for different Chemical EOR applications on full-field scale in other reservoirs with similar characteristics. A single well radial simulation model was built to integrate the surveillance data during PIT and the extensive laboratory experiments. Morever, multiple Pressure Fall Off Tests (PFOs) during the same periods were analyzed and intergaretd in the model.The study assessed the effect of polymer viscosity on mobility reduction, evaluated the polymer bank propagation, investigated the effect of the skin build-up, residual resistance factor (RRF) and shear effects on the well injectivity. Additionally, a comprehensive assisted history match method and robust simulation sensitivity analysis was implemented, thousands of sensitivity simulation runs were performed to capture several possible injection scenarios and validate laboratory parameters. The simulation study confirmed that the PIT could be interpreted using the laboratory-measured polymer parameters such as polymer bulk viscosity, in-situ rheology, RRF and adsorption.

Polymer Injection to Unlock Bypassed Oil in a Giant Carbonate Reservoir: Bridging the Gap Between Laboratory and Large Scale Polymer Project

2021 ◽  
Author(s):  
Clement Fabbri ◽  
Haitham Ali Al Saadi ◽  
Ke Wang ◽  
Flavien Maire ◽  
Carolina Romero ◽  
...  
Keyword(s):  
High Salinity ◽  
Water Injection ◽  
Cross Flow ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Laboratory Work ◽  
High Permeability ◽  
Polymer Injection ◽  
Single Well ◽  
Pilot Design

Abstract Polymer flooding has long been proposed to improve sweep efficiency in heterogeneous reservoirs where polymer enhances cross flow between layers and forces water into the low permeability layers, leading to more homogeneous saturation profile. Although this approach could unlock large volumes of by-passed oil in layered carbonate reservoirs, compatibility of polymer solutions with high salinity - high temperature carbonate reservoirs has been hindering polymer injection projects in such harsh conditions. The aim of this paper is to present the laboratory work, polymer injection field test results and pilot design aimed to unlock target tertiary oil recovery in a highly heterogeneous mixed to oil-wet giant carbonate reservoir. This paper focuses on a highly layered limestone reservoir with various levels of cyclicity in properties. This reservoir may be divided in two main bodies, i.e., an Upper zone and a Lower zone with permeability contrast of up to two orders of magnitude. The main part of the reservoir is currently under peripheral and mid-flank water injection. Field observations show that injected water tends to channel quickly through the Upper zone along the high permeability layers and bypass the oil in the Lower zone. Past studies have indicated that this water override phenomenon is caused by a combination of high permeability contrast and capillary forces which counteract gravity forces. In this setting, adequate polymer injection strategy to enhance cross-flow between these zones is investigated, building on laboratory and polymer injection test field results. A key prerequisite for defining such EOR development scenario is to have representative static and dynamic models that captures the geological heterogeneity of this kind of reservoirs. This is achieved by an improved and integrated reservoir characterization, modelling and water injection history matching procedure. The history matched model was used to investigate different polymer injection schemes and resulted in an optimum pilot design. The injection scheme is defined based on dynamic simulations to maximize value, building on results from single-well polymer injection test, laboratory work and on previous published work, which have demonstrated the potential of polymer flooding for this reservoir. Our study evidences the positive impact of polymer propagation at field scale, improving the water-front stability, which is a function of pressure gradient near producer wells. Sensitivities to the position and number of polymer injectors have been performed to identify the best injection configuration, depending on the existing water injection scheme and the operating constraints. The pilot design proposed builds on laboratory work and field monitoring data gathered during single-well polymer injection field test. Together, these elements represent building blocks to enable tertiary polymer recovery in giant heterogeneous carbonate reservoirs with high temperature - high salinity conditions.

scholarly journals Experimental and theoretical memory diffusion of water in sand

2006 ◽  
Vol 10 (1) ◽  
pp. 93-100 ◽  
Author(s):  
G. Iaffaldano ◽  
M. Caputo ◽  
S. Martino
Keyword(s):  
Porous Media ◽  
Laboratory Experiments ◽  
Solid Particles ◽  
Memory Model ◽  
Flux Rate ◽  
Permeability Changes ◽  
Xixth Century ◽  
Diffusion In Porous Media ◽  
Basic Equations ◽  
Fluid Diffusion

Abstract. The basic equations used to study the fluid diffusion in porous media have been set by Fick and Darcy in the mid of the XIXth century but some data on the flow of fluids in rocks exhibit properties which may not be interpreted with the classical theory of propagation of pressure and fluids in porous media (Bell and Nur, 1978; Roeloffs, 1988). Concerning the fluids and the flow, some fluids carry solid particles which may obstruct some of the pores diminishing their size or even closing them, some others may chemically and physically react with the medium enlarging the pores; so permeability changes during time and the flow occurs as if the medium had a memory. In this paper we show with experimental data that the permeability of sand layers may decrease due to rearrangement of the grains and consequent compaction, as already shown qualitatively by Elias and Hajash (1992). We also provide a memory model for diffusion of fluids in porous media which fits well the flux rate observed in five laboratory experiments of diffusion of water in sand. Finally we show that the flux rate variations observed during the experiments are compatible with the compaction of sand, due to the amount of fluid which went through the grains locally, and therefore with the reduction of porosity.

Sign in / Sign up

Export Citation Format

Share Document