High Performance Water Base Fluid Improves Wellbore Stability and Lowers Torque

2016 ◽  
Author(s):  
E. DeNinno ◽  
M. Molina ◽  
J. Shipman ◽  
H. Dearing ◽  
F. Arpini ◽  
...  
Keyword(s):  
Base Fluid ◽  
High Performance ◽  
Wellbore Stability ◽  
Water Base

A Highly Successful Way to Consistently Drill to Target Depth with Nano Polymer Water-Based Mud in a Highly Active, Problematic Shale Interval

2021 ◽  
Author(s):  
Tulio Daniel Olivares ◽  
Rafael M Pino ◽  
Walid Al-Zahrani ◽  
Samy Mahmoud Aly ◽  
Mohamed El Nahas
Keyword(s):  
High Performance ◽  
New Technology ◽  
Effective Field ◽  
Wellbore Stability ◽  
Fluid Viscosity ◽  
Highly Active ◽  
Water Based ◽  
The Face ◽  
Water Base ◽  
High Level

Abstract The operational drilling history in a particularly challenging shale consistently shows that once the formation's shale reacts, and starts to disperse, in the face of a typical water base mud application, a variety of hole problems are experienced by the operator. These problems include wellbore instability caused by an unstoppable sloughing of the shale; the experiencing of tight hole conditions while performing the wiper trip; caved shale sticking to shakers while drilling; an increased dilution rate due to mud weight; a low LGS % (low gravity solids), and fluid viscosity. To solve this longstanding drilling challenge, a team formed from operator and service provider experts determined via high-level research and testing the need for an innovative new technology of inhibitive fluid chemistry. After extensive testing, the team determined that a particular environmentally friendly Nano Polymer high-performance water-based mud (HPWBM)—one possessing the unique shale inhibition and cutting encapsulation capabilities capable of stabilizing this sticky shale—was the best fit for this application. We will present the investigational learning and effective field trial drilling of high problematic shale that was evaluated during and subsequently the utilization of nanoparticles (NP) to advance water-based mud (WBM) inhibition properties, proven to offer an eco-friendly Nano Polymer HPWBM substitute with the improved thermal and rheological permanency of the overall WBM formulation. Results will display that while providing more effective drilling and wellbore stability, this technology is also a far cleaner industry alternative.

Stranger Things 2: Unconventional Deployment Method of High Performance Lightweight Cement Enables Success in Complex Wells

2021 ◽  
Author(s):  
Joe Shine ◽  
Urooj Qasmi ◽  
Ilesanmi Gbemiga
Keyword(s):  
Quality Assurance ◽  
Potential Flow ◽  
High Performance ◽  
Wellbore Stability ◽  
Technical Solution ◽  
Viable Option ◽  
Isolation Requirements

Abstract There are advantages to using high performance lightweight cement when encountering low bottomhole pressures. The most notable are maintaining wellbore stability during cement placement and the isolation of potential flow zones to achieve the wellbore construction objectives. Several complex wells sought these advantages for similar situations. A review of the deployment process for using high performance lightweight cement conventionally, including the quality assurance measures, initially deemed it as not a viable option. As the complex wells needed a technical solution, an unconventional deployment method for high performance lightweight cement enabled its use while simplifying and improving quality assurance; allowing achievement of the isolation requirements.

Fit for Purpose Design of High Performance Water Base Mud Successfully Replaced Oil Base Mud

2017 ◽  
Author(s):  
Abdelkader Ferras ◽  
Rashid Al Obeidany ◽  
Nabhan Qassabi ◽  
Salim AL Aghbari ◽  
Nadia Abry ◽  
...  
Keyword(s):  
High Performance ◽  
Fit For Purpose ◽  
Water Base

scholarly journals Laponite: a promising nanomaterial to formulate high-performance water-based drilling fluids

2020 ◽  
Author(s):  
Xian-Bin Huang ◽  
Jin-Sheng Sun ◽  
Yi Huang ◽  
Bang-Chuan Yan ◽  
Xiao-Dong Dong ◽  
...  
Keyword(s):  
High Performance ◽  
Drilling Fluid ◽  
Nitrogen Adsorption ◽  
Drill String ◽  
Wellbore Stability ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Mechanism Analysis ◽  
Water Based ◽  
Inhibition Performance

Abstract High-performance water-based drilling fluids (HPWBFs) are essential to wellbore stability in shale gas exploration and development. Laponite is a synthetic hectorite clay composed of disk-shaped nanoparticles. This paper analyzed the application potential of laponite in HPWBFs by evaluating its shale inhibition, plugging and lubrication performances. Shale inhibition performance was studied by linear swelling test and shale recovery test. Plugging performance was analyzed by nitrogen adsorption experiment and scanning electron microscope (SEM) observation. Extreme pressure lubricity test was used to evaluate the lubrication property. Experimental results show that laponite has good shale inhibition property, which is better than commonly used shale inhibitors, such as polyamine and KCl. Laponite can effectively plug shale pores. It considerably decreases the surface area and pore volume of shale, and SEM results show that it can reduce the porosity of shale and form a seamless nanofilm. Laponite is beneficial to increase lubricating property of drilling fluid by enhancing the drill pipes/wellbore interface smoothness and isolating the direct contact between wellbore and drill string. Besides, laponite can reduce the fluid loss volume. According to mechanism analysis, the good performance of laponite nanoparticles is mainly attributed to the disk-like nanostructure and the charged surfaces.

Four-well comparison in Papua New Guinea: high-risk, high-angle wells demonstrate extended wellbore stability and faster drilling time with inhibitive high-performance water-based fluid

2011 ◽  
Vol 51 (1) ◽  
pp. 119
Author(s):  
Angus Florence ◽  
Mike Dow ◽  
George Shieh ◽  
JV Babu
Keyword(s):  
High Risk ◽  
Papua New Guinea ◽  
High Performance ◽  
Cost Savings ◽  
New Guinea ◽  
Wellbore Stability ◽  
Drilling Fluids ◽  
Water Based ◽  
Performance Decline ◽  
Glycol Fluid

A four-well project located onshore Papua New Guinea provided an opportunity to compare the performance of two inhibitive drilling fluids in the problematic 12¼” interval. Wells A and B were drilled using a conventional KCl/glycol fluid. Wells C and D used a high-performance water-based fluid (HPWBF) containing a shale inhibitor that also provides lubricity. All four wells were drilled with the same rig. The base brine for both fluids was KCl. All hole sections were directionally drilled from vertical to near horizontal by section TD through a claystone interval. Tectonic wellbore breakout was present in all four wells, and the position of the breakout in the wellbore varied from well to well. Well A was regarded as the easiest well to drill due to the breakout being on the sides on the inclined well bore (horizontal), and Well D was regarded as being the most difficult well to drill due to the breakout being located directly on the top and bottom of the wellbore (vertical). Performance comparisons were made using on bottom rates of penetration, tripping times, casing running times, and overall hole section costs. These data have been normalised to remove non hole related NPT events. The KCl/glycol system provided sufficient wellbore stability in Wells A and B with horizontal breakouts and with non-optimal breakouts with very limited openhole exposure. For higher risk wells C and D with non-optimal breakout positions however, the HPWBF offered improved reliability and ensured there was no performance decline. Outstanding performance occurred in Well D where the HPWBF maintained good wellbore stability over a 56-day exposure. Although the KCl/glycol fluid had a lower cost/bbl, improved overall cost savings were achieved by using the HPWBF in the high-risk wells. This paper addresses all operations performed while drilling and casing the 12¼” interval. Possible causes for performance differences are evaluated, taking into account that mud systems represent only one variable. As other variables were introduced progressively, it was possible to back these out to determine mud system effectiveness.

Sodium Silicate Based Drilling Fluid Application in Gulf of Thailand to Stabilise Wellbore: A Case Study

2021 ◽  
Author(s):  
Waleepon Sukarasep ◽  
Rahul Sukanta Dey ◽  
Visarut Phonpuntin
Keyword(s):  
Sodium Silicate ◽  
High Performance ◽  
Drilling Fluid ◽  
Wellbore Stability ◽  
Drilling Fluids ◽  
Gulf Of Thailand ◽  
Hole Cleaning ◽  
Water Based ◽  
Wellbore Strengthening ◽  
Effective Seal

Abstract Sodium Silicate were first used in water-based drilling fluids to stabilize claystone formations in the 1930's, but found favour in the 1990's in high performance, non dispersed water based systems for drilling problematic claystone formations as an alternative to oil-based drilling fluids. In Bongkot South field, Gulf of Thailand, sodium silicate-based drilling fluid (SSBDF) were used with mixed success in shallow gas drilling. Typically, platform WP-33, the claystone formation of the 12¼" section were drilled with 5% v/v Sodium Silicate in the water based drilling fluid together with excessive circulation as intention to improve hole cleaning frequently result in a wellbore that was overgauge by upto 18.9% in some case. This led to further hole cleaning problem that also compromised cement job quality. A further 6 well campaign on WPS-16 required a re-evaulation of the SSBDF coupled to an understanding of the wellbore instability mechanisms that leads to hole enlargement. To overcome better wellbore stability, sodium silicate has been designed by increased concentration to 8% v/v sodium silicate treated drilling fluid showed optimal design for application base on application of SSBDF has been used on platform WP-11 in 2002. Rheology, hydraulic and flow regime was adjusted for laminar flow that reduced the erosion of fragile claystone formation in the wellbore. The revised SSBDF formulation at WPS-16 result in a significant reduction of hole enlargement to 3.2% in the claystone section through a combination of chemicals and mechanical inhibition that contribute improved hole cleaning. The addition of wellbore strengthening material also provide an effective seal to minimize gas invasion. This paper describes the field trials in the Gulf of Thailand drilled with revised sodium sodium silicate based drilling fluid, the use of wellbore strengthening materials to manage gas influxes, better drilling practice and hydraclic simulation concluded that high performance water based drilling fluid of this nature have wider application where oil-base drilling fluid have traditionally been used.

Sign in / Sign up

Export Citation Format

Share Document