Innovation and Practice of Reservoir Architecture Detailed Characterization and Remaining Oil Potential Tapping Technology in High Water-cut Stage of Large Offshore Fluvial Heavy Oilfield

2015 ◽  
Author(s):  
Yanchun Su ◽  
Tingli Li ◽  
Chunliang Huo
Keyword(s):  
High Water ◽  
Detailed Characterization ◽  
Reservoir Architecture ◽  
Remaining Oil ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

scholarly journals Techniques for improving the water-flooding of oil fields during the high water-cut stage

2019 ◽  
Vol 74 ◽  
pp. 69 ◽  
Author(s):  
Kuiqian Ma ◽  
Ao Li ◽  
Shuhao Guo ◽  
Jieqiong Pang ◽  
Yongchao Xue ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Reduction Rate ◽  
High Water ◽  
Water Flooding ◽  
Variable Intensity ◽  
Remaining Oil ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

The multi-layer co-exploitation method is often used in offshore oilfields because of the large spacing between the injection and production wells. As oilfields gradually enter the high water-cut stage, the contradiction between the horizontal and vertical directions becomes more prominent, and the distribution of the remaining oil is more complex. Oilfields are facing unprecedented challenges in further enhancing oil recovery. Using oilfield A, which is in the high water-cut stage, as the research object, we compiled a detailed description of the remaining oil during the high water-cut stage using the information collected during the comprehensive adjustment and infilling of the oilfield. In addition various techniques for tapping the potential reservoir, stabilizing the oil, and controlling the water were investigated. A set of key techniques for the continuous improvement of the efficiency of water injection after comprehensive adjustment of high water-cut fields was generated. Based on the determined configuration of the offshore deltaic reservoir, a set of detailed descriptive methods and tapping technology for extracting the remaining oil in the offshore high water-cut oilfield after comprehensive adjustment was established. By considering the equilibrium displacement and using a new quantitative characterization method that includes displacement, a new technique for determining the quantity of water that needs to be injected into a stratified injection well during the high water-cut stage was established. Based on the principle of flow field intensity reconfiguration, a linear, variable-intensity, alternating injection and withdrawal technique was proposed. With the application of this series of techniques, the increase in the water content was controlled to within 1%, the natural reduction rate was controlled to within 9%, and the production increased by 1.060 × 107 m3.

The Analysis of Remaining Oil in High Water Cut Stage

2013 ◽  
Vol 274 ◽  
pp. 675-678
Author(s):  
Cheng Fu ◽  
Bin Huang
Keyword(s):  
Characteristic Curve ◽  
Material Balance ◽  
High Water ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Remaining Oil Distribution ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Material Balance Method

The remaining oil distribution is very complex and the difficulty in tapping measures is more and more big when the west block of South-eight area has gone into the ultra-high water cut stage. So the remaining oil distribution in 109 units has been comprehensively studied on the condition that the composite water cut reaches 9.06% by establishing reservoir geologic model and proceeding reservoir numerical simulation according to recent tapping measures and remaining oil analysis experience in the process of adjusting scheme. And combined with some reservoir engineering methods such as: waterflooding characteristic curve and material balance method, obvious effects has been obtained in this research.

Remaining Oil Development Study of a Nature Water Drive Reservoir in the High Water Cut Stage

2014 ◽  
Vol 522-524 ◽  
pp. 1346-1350
Author(s):  
Jian Huai Wang ◽  
Wei Nan Zhang
Keyword(s):  
Bottom Water ◽  
High Water ◽  
Distribution Law ◽  
Development Feature ◽  
Well Pattern ◽  
Barrier Region ◽  
Remaining Oil ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

Taking M reservoir of D field as an example, analyzing the development feature of a thick sandstone reservoir in the high water cut stage which is driven by natural water, and studying the distribution law of remaining oil for this reservoir through 3 aspects: sweeping of the edge-bottom water, completeness of the well pattern and barrier of the partial interbed, and expounding the development method and effect of this thick sand reservoir in the high water cut stage through exploiting 3 kinds of remaining oil rich regions as fellows: the region which is not swept by the edge-bottom water; incomplete region of the well pattern and barrier region of the partial interbed.

Study on the Distribution Charecteristics of Remaining Oil in Fluvial-Deltaic Reservoirs at High Water Cut Stage

2003 ◽  
Author(s):  
Qinglong Du ◽  
Chengfang Shi ◽  
Lihong Zhu ◽  
Aili Xiao ◽  
Hailong Liang ◽  
...  
Keyword(s):  
High Water ◽  
Remaining Oil ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

scholarly journals The research on the classification method of high water-cut well group in Y block

2020 ◽  
Vol 194 ◽  
pp. 01024
Author(s):  
Yu Xiaoyuan
Keyword(s):  
Water Content ◽  
High Water ◽  
High Water Content ◽  
Saturation Field ◽  
Oil Saturation ◽  
Remaining Oil ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Seepage Channel

Y block has entered the ultra-high water cut stage of production, and the water cut of oil wells is generally higher than 90%. Before polymer flooding, water cut continues to rise. High-water-bearing wells in the injected area are characterized by difficulty in effectiveness and low water cut decline, which seriously affects the overall development effect of the area. In this paper, the high water-bearing wells are divided into four categories by the parameter index of the number of layers in the high water-bearing channels before polymer flooding.Through the splitstream curve and the phase permeability curve, the permeability and oil saturation data under the condition of 98% water content were selected for fitting, and the critical oil saturation formula was obtained.The ratio between the oil saturation and the critical oil saturation is calculated by numerical simulation, and the discriminant standard of the dominant seepage channel with high water content is established.Compared with previous remaining oil saturation field identification methods, changed the method according to the conventional ideas of remaining oil saturation evaluation of water and residual oil, through the analysis of reservoir permeability parameters for the current development under the condition of the target reservoir quantitative identification of the cause of high water cut, to cause high containing water wells and reservoir high water cut oilfield management work provide quantitative analysis and objective guidance.

Sign in / Sign up

Export Citation Format

Share Document