Miscible and Immiscible Gas Injection for Enhancing of Condensate Recovery in Fractured Gas Condensate Reservoirs

2013 ◽  
Author(s):  
Amir Taheri ◽  
Lars Hoier ◽  
Ole Torsaeter
Keyword(s):  
Gas Injection ◽  
Gas Condensate ◽  
Gas Condensate Reservoirs ◽  
Immiscible Gas Injection

Optimization of Lean Gas Injection in Gas-Condensate Reservoirs

1995 ◽  
Author(s):  
A.P. Pires ◽  
A.C.F. Correa ◽  
R.S. Mohamed ◽  
R. Sousa
Keyword(s):  
Gas Injection ◽  
Gas Condensate ◽  
Gas Condensate Reservoirs

Gas Injection EOR in Eagle Ford Shale Gas Condensate Reservoirs

2019 ◽  
Author(s):  
Reza Ganjdanesh ◽  
Wei Yu ◽  
Mauricio Xavier Fiallos ◽  
Erich Kerr ◽  
Kamy Sepehrnoori ◽  
...  
Keyword(s):  
Shale Gas ◽  
Gas Injection ◽  
Gas Condensate ◽  
Eagle Ford Shale ◽  
Eagle Ford ◽  
Gas Condensate Reservoirs

scholarly journals Sensitivity analysis and economic optimization studies of inverted five-spot gas cycling in gas condensate reservoir

Open Physics ◽  
2017 ◽  
Vol 15 (1) ◽  
pp. 525-535 ◽  
Author(s):  
Bilal Shams ◽  
Jun Yao ◽  
Kai Zhang ◽  
Lei Zhang
Keyword(s):  
Sensitivity Analysis ◽  
Gas Injection ◽  
Gas Condensate ◽  
Dew Point ◽  
Injection Timing ◽  
Complex Flow ◽  
Gas Condensate Reservoirs ◽  
Injection Duration ◽  
Well Pattern ◽  
Gas Cycling

AbstractGas condensate reservoirs usually exhibit complex flow behaviors because of propagation response of pressure drop from the wellbore into the reservoir. When reservoir pressure drops below the dew point in two phase flow of gas and condensate, the accumulation of large condensate amount occurs in the gas condensate reservoirs. Usually, the saturation of condensate accumulation in volumetric gas condensate reservoirs is lower than the critical condensate saturation that causes trapping of large amount of condensate in reservoir pores. Trapped condensate often is lost due to condensate accumulation-condensate blockage courtesy of high molecular weight, heavy condensate residue. Recovering lost condensate most economically and optimally has always been a challenging goal. Thus, gas cycling is applied to alleviate such a drastic loss in resources.In gas injection, the flooding pattern, injection timing and injection duration are key parameters to study an efficient EOR scenario in order to recover lost condensate. This work contains sensitivity analysis on different parameters to generate an accurate investigation about the effects on performance of different injection scenarios in homogeneous gas condensate system. In this paper, starting time of gas cycling and injection period are the parameters used to influence condensate recovery of a five-spot well pattern which has an injection pressure constraint of 3000 psi and production wells are constraint at 500 psi min. BHP. Starting injection times of 1 month, 4 months and 9 months after natural depletion areapplied in the first study. The second study is conducted by varying injection duration. Three durations are selected: 100 days, 400 days and 900 days.In miscible gas injection, miscibility and vaporization of condensate by injected gas is more efficient mechanism for condensate recovery. From this study, it is proven that the application of gas cycling on five-spot well pattern greatly enhances condensate recovery preventing financial, economic and resource loss that previously occurred.

Sign in / Sign up

Export Citation Format

Share Document