Precise Approach to Isolate Fractured Water Bearing Lower Zone in Complex Saudi Arabian Gas Well by Placing Ceramic Proppant and Cement in Restricted Depth Utilizing HPCT to Withstand High Bottom-hole Pressure during Fracturing Treatment in the Upper Zone: A Case History

2012 ◽  
Author(s):  
Ataur R. Malik ◽  
Jorge E. Duarte ◽  
Hamad F. Kulaib ◽  
Mohammed A. Atwi ◽  
Eduardo Vejarano R. ◽  
...  
Keyword(s):  
Case History ◽  
Saudi Arabian ◽  
Lower Zone ◽  
Gas Well ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole

scholarly journals Dynamical well-killing simulation of a vertical H2S-containing natural gas well

2020 ◽  
Vol 75 ◽  
pp. 71
Author(s):  
Liangjie Mao ◽  
Mingjie Cai ◽  
Qingyou Liu ◽  
Guorong Wang
Keyword(s):  
Natural Gas ◽  
Drilling Fluid ◽  
Coupled Model ◽  
Transient Temperature ◽  
Fluid Density ◽  
Gas Well ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole ◽  
Casing Pressure

This work aims to explore the dynamical well-killing process of a vertical H2S-containing natural gas well. A dynamical well-killing model considering an H2S solubility was established to simulate the overflow and well-killing process of a vertical H2S-containing natural gas well. The mass and momentum equations of the coupled model were solved using finite difference method, while the transient temperature prediction model was solved using finite volume method. The coupled model was validated by reproducing experimental data and field data of Well Tiandong #5. The effect of H2S content, mud displacement, drilling fluid density, and initial overflow volume on the dynamical well-killing process of an H2S-containing natural gas well were obtained and analyzed in this work. Results showed that H2S will gasify near wellhead during well killing when casing pressure decreases. To balance the bottom hole pressure, when H2S releases, the casing pressure increases as H2S content increases. As initial overflow volume increases, the annular temperature, annular pressure and the casing pressure increase significantly. When H2S gasifies, the casing pressure applied at wellhead should be higher at lower initial overflow volume to balance bottom hole pressure. In the well-killing process, the annular pressure and temperature decrease as drilling fluid density increases and a lower casing pressure is needed for balancing bottom hole pressure. The casing pressure is lower at a higher displacement for higher friction resistance. Besides, as well-killing displacement increases H2S will gasify at an earlier time. When drilling for H2S-containing natural gas well, early detection of gas kick should be more frequent to avoid severe overflow. Besides, higher displacement and density of drilling fluid should be considered to avoid stratum fracturing and prevent leakage accidents under the premise of meeting drilling requirements.

scholarly journals Production behavior evaluation on multilayer commingled stress-sensitive carbonate gas reservoir

2020 ◽  
pp. 014459872096415
Author(s):  
Jianlin Guo ◽  
Fankun Meng ◽  
Ailin Jia ◽  
Shuo Dong ◽  
Haijun Yan ◽  
...  
Keyword(s):  
Early Stage ◽  
Sedimentary Environment ◽  
Production Performance ◽  
Total Production ◽  
Inversion Algorithm ◽  
Gas Reservoir ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole ◽  
Production Behavior

Influenced by the complex sedimentary environment, a well always penetrates multiple layers with different properties, which leads to the difficulty of analyzing the production behavior for each layer. Therefore, in this paper, a semi-analytical model to evaluate the production performance of each layer in a stress-sensitive multilayer carbonated gas reservoir is proposed. The flow of fluids in layers composed of matrix, fractures, and vugs can be described by triple-porosity/single permeability model, and the other layers could be characterized by single porosity media. The stress-sensitive exponents for different layers are determined by laboratory experiments and curve fitting, which are considered in pseudo-pressure and pseudo-time factor. Laplace transformation, Duhamel convolution, Stehfest inversion algorithm are used to solve the proposed model. Through the comparison with the classical solution, and the matching with real bottom-hole pressure data, the accuracy of the presented model is verified. A synthetic case which has two layers, where the first one is tight and the second one is full of fractures and vugs, is utilized to study the effects of stress-sensitive exponents, skin factors, formation radius and permeability for these two layers on production performance. The results demonstrate that the initial well production is mainly derived from high permeable layer, which causes that with the rise of formation permeability and radius, and the decrease of stress-sensitive exponents and skin factors, in the early stage, the bottom-hole pressure and the second layer production rate will increase. While the first layer contributes a lot to the total production in the later period, the well bottom-hole pressure is more influenced by the variation of formation and well condition parameters at the later stage. Compared with the second layer, the scales of formation permeability and skin factor for first layer have significant impacts on production behaviors.

scholarly journals A Unified Formula for Determination of Wellhead Pressure and Bottom-hole Pressure

2013 ◽  
Vol 37 ◽  
pp. 3291-3298 ◽  
Author(s):  
Mingze Liu ◽  
Bing Bai ◽  
Xiaochun Li
Keyword(s):  
Wellhead Pressure ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole
Sign in / Sign up

Export Citation Format

Share Document