scholarly journals Some Considerations on Bottom Hole Pressure Build-Up Phenomena-(III)

1967 ◽  
Vol 32 (3) ◽  
pp. 135-139
Author(s):  
Takato FUCHIDA
Keyword(s):  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole

scholarly journals Production behavior evaluation on multilayer commingled stress-sensitive carbonate gas reservoir

2020 ◽  
pp. 014459872096415
Author(s):  
Jianlin Guo ◽  
Fankun Meng ◽  
Ailin Jia ◽  
Shuo Dong ◽  
Haijun Yan ◽  
...  
Keyword(s):  
Early Stage ◽  
Sedimentary Environment ◽  
Production Performance ◽  
Total Production ◽  
Inversion Algorithm ◽  
Gas Reservoir ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole ◽  
Production Behavior

Influenced by the complex sedimentary environment, a well always penetrates multiple layers with different properties, which leads to the difficulty of analyzing the production behavior for each layer. Therefore, in this paper, a semi-analytical model to evaluate the production performance of each layer in a stress-sensitive multilayer carbonated gas reservoir is proposed. The flow of fluids in layers composed of matrix, fractures, and vugs can be described by triple-porosity/single permeability model, and the other layers could be characterized by single porosity media. The stress-sensitive exponents for different layers are determined by laboratory experiments and curve fitting, which are considered in pseudo-pressure and pseudo-time factor. Laplace transformation, Duhamel convolution, Stehfest inversion algorithm are used to solve the proposed model. Through the comparison with the classical solution, and the matching with real bottom-hole pressure data, the accuracy of the presented model is verified. A synthetic case which has two layers, where the first one is tight and the second one is full of fractures and vugs, is utilized to study the effects of stress-sensitive exponents, skin factors, formation radius and permeability for these two layers on production performance. The results demonstrate that the initial well production is mainly derived from high permeable layer, which causes that with the rise of formation permeability and radius, and the decrease of stress-sensitive exponents and skin factors, in the early stage, the bottom-hole pressure and the second layer production rate will increase. While the first layer contributes a lot to the total production in the later period, the well bottom-hole pressure is more influenced by the variation of formation and well condition parameters at the later stage. Compared with the second layer, the scales of formation permeability and skin factor for first layer have significant impacts on production behaviors.

scholarly journals A Unified Formula for Determination of Wellhead Pressure and Bottom-hole Pressure

2013 ◽  
Vol 37 ◽  
pp. 3291-3298 ◽  
Author(s):  
Mingze Liu ◽  
Bing Bai ◽  
Xiaochun Li
Keyword(s):  
Wellhead Pressure ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole

scholarly journals Mechanism of shear failure near fracture face during drainage process of CBM well

2018 ◽  
Vol 10 (8) ◽  
pp. 3309-3317
Author(s):  
Ping Xiong ◽  
Wang-shui Hu ◽  
Hai-xia Hu ◽  
Hailong Liu
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracture ◽  
Shear Failure ◽  
Failure Envelope ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Induced Stress ◽  
In Situ Stresses ◽  
Bottom Hole

Abstract In this paper, whether the coal fines can be induced by shear failure during drainage process has been discussed in detail. By coupling with the percolation theory, the elasticity mechanics were used to construe the extra stresses in the formation surrounding with the hydraulic fracture. The safe window of the bottom hole pressure was also calculated from the failure envelope. The research shows that the formation pressure on the fracture surface of the coal seam is negatively related with the bottom hole pressure, and the induced stress is positively related with the bottom hole pressure during the drainage process of fractured CBM wells. The pore pressure around the fracture changed due to pore-elastic effects, which also caused a significant change of the in situ stresses. In order to avoid the breakout of the coal seam around hydraulic fracture during drainage process, the model of the reasonable bottom hole pressure is also built.

First MPD Project in Myanmar Successfully Completed on Deepwater Exploration Well

2021 ◽  
Author(s):  
Harpreet Kaur Dalgit Singh ◽  
Bao Ta Quoc ◽  
Benny Benny ◽  
Ching Shearn Ho
Keyword(s):  
Pore Pressure ◽  
Control Device ◽  
Back Pressure ◽  
Deepwater Drilling ◽  
Hole Pressure ◽  
Bottom Hole Pressure ◽  
Bottom Hole ◽  
Managed Pressure Drilling ◽  
Pore Pressure Prediction ◽  
Exploration Well

Abstract With the many challenges associated with Deepwater Drilling, Managed Pressure Drilling has proven to be a very useful tool to mitigate many hurdles. Client approached Managed Pressure Drilling technology to drill Myanmar's first MPD well on a Deepwater exploration well. The well was drilled with a Below Tension Ring-Slim Rotating Control Device (BTR-S RCD) and Automated MPD Choke System installed on semi-submersible rig, Noble Clyde Boudreaux (NCB). The paper will detail MPD objectives, application and well challenges, in conjunction with pore pressure prediction to manage the bottom hole pressure to drill to well total depth safely and efficiently. This exploration well was drilled from a water depth of 590m from a Semisubmersible rig required MPD application for its exploratory drilling due to uncertainties of drilling window which contained a sharp pressure ramp, with a history of well bore ballooning there was high potential to encounter gas in the riser. The Deepwater MPD package integrated with the rig system, offered a safer approach to overcome the challenges by enhanced influx monitoring and applying surface back pressure (SBP) to adjust bottom hole pressures as required. Additionally, modified pore pressure hunting method was incorporated to the drilling operation to allow more accurate pore pressure prediction, which was then applied to determine the required SBP in order to maintain the desired minimum overbalance while drilling ahead. The closed loop MPD circulating system allowed to divert returns from the well, through MPD flow spool into MPD distribution manifold and MPD automated choke manifold system to the shakers and rig mud gas separator (MGS). The automated MPD system allows control and adjustments of surface back pressure to control bottom hole pressure. MPD technology was applied with minimal overbalance on drilling and connections while monitoring on background gases. A refined pore pressure hunting method was introduced with manipulation of applied surface back pressure to define this exploration well pore pressure and drilling window. The applied MPD Deepwater technique proved for cost efficiency and rig days to allow two deeper casing setting depths and eliminating requirement to run contingency liners. MPD system and equipment is proving to be a requirement for Deepwater drilling for optimizing drilling efficiency. This paper will also capture detailed lesson learned from the operations as part of continuous learning for improvement on Deepwater MPD drilling.

Sign in / Sign up

Export Citation Format

Share Document