Remote Real Time Well Testing - Experience in the Grove Gas Field in the North Sea

Author(s):  
Ali Shahbaz Sikandar ◽  
Aamir Badr ◽  
Yakov Alexandrovich Shumakov ◽  
Bertrand C. Theuveny ◽  
Michael McMillon ◽  
...  
2016 ◽  
Author(s):  
Lucas Merckelbach

Abstract. Ocean gliders have become ubiquitous observation platforms in the ocean in recent years. They are also increasingly used in coastal environments. The coastal observatory system COSYNA has pioneered the use of gliders in the North Sea, a shallow tidally energetic shelf sea. For operational reasons, the gliders operated in the North Sea are programmed to resurface every 3–5 hours. The glider's deadreckoning algorithm yields depth averaged currents, averaged in time over each subsurface interval. Under operational conditions these averaged currents are a poor approximation of the instantaneous tidal current. In this work an algorithm is developed that estimates the instantaneous current (tidal and residual) from glider observations only. The algorithm uses a second-order Butterworth low-pass filter to estimate the residual current component, and a Kalman filter based on the linear shallow water equations for the tidal component. A comparison of data from a glider experiment with current data from an ADCP deployed nearby shows that the standard deviations for the east and north current components are better than 7 cm s−1 in near-real time mode, and improve to better than 5 cm s−1 in delayed mode, where the filters can be run forward and backward. In the near-real time mode the algorithm provides estimates of the currents that the glider is expected to encounter during its next few dives. Combined with a behavioural and dynamic model of the glider, this yields predicted trajectories, the information of which is incorporated in warning messages issued to ships by the (German) authorities. In delayed mode the algorithm produces useful estimates of the depth averaged currents, which can be used in (process-based) analyses in case no other source of measured current information is available.


2016 ◽  
Vol 13 (24) ◽  
pp. 6637-6649 ◽  
Author(s):  
Lucas Merckelbach

Abstract. Ocean gliders have become ubiquitous observation platforms in the ocean in recent years. They are also increasingly used in coastal environments. The coastal observatory system COSYNA has pioneered the use of gliders in the North Sea, a shallow tidally energetic shelf sea. For operational reasons, the gliders operated in the North Sea are programmed to resurface every 3–5 h. The glider's dead-reckoning algorithm yields depth-averaged currents, averaged in time over each subsurface interval. Under operational conditions these averaged currents are a poor approximation of the instantaneous tidal current. In this work an algorithm is developed that estimates the instantaneous current (tidal and residual) from glider observations only. The algorithm uses a first-order Butterworth low pass filter to estimate the residual current component, and a Kalman filter based on the linear shallow water equations for the tidal component. A comparison of data from a glider experiment with current data from an acoustic Doppler current profilers deployed nearby shows that the standard deviations for the east and north current components are better than 7 cm s−1 in near-real-time mode and improve to better than 6 cm s−1 in delayed mode, where the filters can be run forward and backward. In the near-real-time mode the algorithm provides estimates of the currents that the glider is expected to encounter during its next few dives. Combined with a behavioural and dynamic model of the glider, this yields predicted trajectories, the information of which is incorporated in warning messages issued to ships by the (German) authorities. In delayed mode the algorithm produces useful estimates of the depth-averaged currents, which can be used in (process-based) analyses in case no other source of measured current information is available.


2003 ◽  
Vol 20 (1) ◽  
pp. 761-770 ◽  
Author(s):  
A. P. Hillier

AbstractDiscovered in 1966 and starting production in 1968, Leman was the second gas field to come into production in the UK sector of the North Sea and is still producing gas today. It is classified as a giant field with an estimated initial gas-in-place of 397 BCM of gas in the aeolian dune sands of the Rotliegend Group. The field extends over five blocks and is being developed by two licence groups with Shell and Amoco (now BP Amoco) being the operators


Author(s):  
Ben Dando ◽  
Kamran Iranpour ◽  
Volker Oye ◽  
Sascha Bussat ◽  
Louise Bjerrum

Geophysics ◽  
1965 ◽  
Vol 30 (4) ◽  
pp. 495-510 ◽  
Author(s):  
Ernest E. Cook

During the last three years the discovery of the world’s second largest natural gas field at Groningen in the Netherlands has touched off in the North Sea one of the greatest competitive offshore geophysical operations in history. Before 1962, only minor amounts of geophysical work had been done there. Severe weather conditions were expected, but seismic operations have not been as much affected by weather as was originally anticipated. However, strong currents, making cable location uncertain, hampered reflection stacking and refraction operations. Location by radio was also a serious problem due to lack of sufficient available frequencies for a lane identification system. Seismic work was carried out safely in areas mapped as mine fields. Few problems with the fishing industry have so far been encountered. As a preliminary, the geophysics of the Groningen area are discussed. A gravity compilation of the North Sea shows that there are three major basins—the Northwest German Zechstein Basin, the British North Sea Basin, and the Norwegian North Sea Basin. The British Basin which contains Tertiary, Cretaceous, Jurassic, Triassic, Permian, Carboniferous, and older sediments shows considerable salt movement with salt domes, walls, and pillows being in evidence to within 30 miles of the eastern coast of England. Some examples of seismic record sections show the quality of data and the kind of structures encountered. Water reverberations were satisfactorily reduced by means of anti‐ringing procedures. Multiple reflections were frequently observed and often interfered with or obscured simple reflections. Refraction studies indicate that two main refractors, the Upper Cretaceous Chalk and the Upper Magnesian Limestone of the Permian, are present over most of the British Basin. Mapping the key basal Permian reflector is made difficult by deterioration of the reflection under areas of salt growth. Stacking sometimes enhances this reflection. Also intrusions of Permian salt into the Mesozoic beds give rise to large and rapid changes in thickness of the overlying low‐velocity Tertiary and high‐velocity Cretaceous chalk sections. A correction system for these large lateral velocity changes is described.


1991 ◽  
Vol 14 (1) ◽  
pp. 451-458 ◽  
Author(s):  
A. P. Hillier ◽  
B. P. J. Williams

AbstractDiscovered in 1966 and starting production in 1968, Leman was the second gas field to come into production in the UK sector of the North Sea. It is classified as a giant field with an estimated ultimate recovery of 11 500 BCF of gas in the aeolian dune sands of the Rotliegend Group. The field extends over five blocks and is being developed by two groups with Shell and Amoco being the operators. Despite being such an old field development drilling is still ongoing in the field with the less permeable northwest area currently being developed.


Sign in / Sign up

Export Citation Format

Share Document