Minimizing Dynamic Dysfunctions Sets New Drilling Performance Benchmark in Saudi Gas Application

2009 ◽  
Author(s):  
Van Brackin ◽  
Mike Doster ◽  
Fadi Mounzer ◽  
Luani Alfonzo
Keyword(s):  
Drilling Performance ◽  
Performance Benchmark

Conical Diamond Element on PDC Bits Sets New Drilling Performance Benchmark in Northern Kuwait Field

2017 ◽  
Author(s):  
Dhakil Al-Enezi ◽  
Bijan Goswami ◽  
Yogesh Takate ◽  
Talal Al-Wehaidah ◽  
Ayomarz Jokhi ◽  
...  
Keyword(s):  
Drilling Performance ◽  
Performance Benchmark

Optimization of Deep Drilling Performance; Benchmark Testing Drives ROP Improvements for Bits and Drilling Fluids

2007 ◽  
Author(s):  
Arnis Judzis ◽  
Alan Duane Black ◽  
David A. Curry ◽  
Matthew John Meiners ◽  
Tim Grant ◽  
...  
Keyword(s):  
Drilling Fluids ◽  
Deep Drilling ◽  
Benchmark Testing ◽  
Drilling Performance ◽  
Performance Benchmark

Optimization of Deep-Drilling Performance--Benchmark Testing Drives ROP Improvements for Bits and Drilling Fluids

2009 ◽  
Vol 24 (01) ◽  
pp. 25-39 ◽  
Author(s):  
Arnis Judzis ◽  
Alan D. Black ◽  
David A. Curry ◽  
Matthew J. Meiners ◽  
Tim Grant ◽  
...  
Keyword(s):  
Drilling Fluids ◽  
Deep Drilling ◽  
Benchmark Testing ◽  
Drilling Performance ◽  
Performance Benchmark

Soft Torque Impact on Drilling Performance in Qatar

2014 ◽  
Author(s):  
F. Attar ◽  
R. Grauwmans ◽  
O. Ikhajiagbe
Keyword(s):  
Drilling Performance

Optimization of Drilling Performance Based on an Intelligent Drilling Advisory System

2019 ◽  
Author(s):  
Mahmoud Abughaban ◽  
Amjad Alshaarawi ◽  
Cui Meng ◽  
Guodong Ji ◽  
Weihong Guo
Keyword(s):  
Advisory System ◽  
Drilling Performance

Bottom Hole Assembly Design Enhancement Successfully Eliminate Hole Problems and Reduce Significant Drilling Time : South S Field Case Study

2020 ◽  
Author(s):  
Y. D. Mulia
Keyword(s):  
Contact Area ◽  
Cost Savings ◽  
Assembly Design ◽  
Drilling Performance ◽  
Bottom Hole ◽  
Unconsolidated Sand ◽  
Bottom Hole Assembly ◽  
Drilling Parameter ◽  
Drilling Time

For S-15 and S-14 wells at South S Field, drilling of the 12-1/4” hole section became the longest tangent hole section interval of both wells. There were several challenges identified where hole problems can occur. The hole problems often occur in the unconsolidated sand layers and porous limestone formation sections of the hole during tripping in/out operations. Most of the hole problems are closely related to the design of the Bottom Hole Assembly (BHA). In many instances, hole problems resulted in significant additional drilling time. As an effort to resolve this issue, a new BHA setup was then designed to enhance the BHA drilling performance and eventually eliminate hole problems while drilling. The basic idea of the enhanced BHA is to provide more annulus clearance and limber BHA. The purpose is to reduce the Equivalent Circulating Density (ECD,) less contact area with formation, and reduce packoff risk while drilling through an unconsolidated section of the rocks. Engineering simulations were conducted to ensure that the enhanced BHA were able to deliver a good drilling performance. As a results, improved drilling performance can be seen on S-14 well which applied the enhanced BHA design. The enhanced BHA was able to drill the 12-1/4” tangent hole section to total depth (TD) with certain drilling parameter. Hole problems were no longer an issue during tripping out/in operation. This improvement led to significant rig time and cost savings of intermediate hole section drilling compared to S-15 well. The new enhanced BHA design has become one of the company’s benchmarks for drilling directional wells in South S Field.

Performance Benchmark for a Prismatic Flow Solver

2007 ◽  
Author(s):  
Bharat K. Soni ◽  
Yasushi Ito
Keyword(s):  
Flow Solver ◽  
Performance Benchmark

scholarly journals Incremental and acceleration production estimation and their effect on optimization of well infill locations in tight gas reservoirs

2021 ◽  
Author(s):  
Atheer Dheyauldeen ◽  
Omar Al-Fatlawi ◽  
Md Mofazzal Hossain
Keyword(s):  
Transient Flow ◽  
Development Planning ◽  
Main Role ◽  
Gas Reservoirs ◽  
Type Curves ◽  
Field Development ◽  
Drilling Performance ◽  
Well Location ◽  
Infill Drilling ◽  
Tight Formations

AbstractThe main role of infill drilling is either adding incremental reserves to the already existing one by intersecting newly undrained (virgin) regions or accelerating the production from currently depleted areas. Accelerating reserves from increasing drainage in tight formations can be beneficial considering the time value of money and the cost of additional wells. However, the maximum benefit can be realized when infill wells produce mostly incremental recoveries (recoveries from virgin formations). Therefore, the prediction of incremental and accelerated recovery is crucial in field development planning as it helps in the optimization of infill wells with the assurance of long-term economic sustainability of the project. Several approaches are presented in literatures to determine incremental and acceleration recovery and areas for infill drilling. However, the majority of these methods require huge and expensive data; and very time-consuming simulation studies. In this study, two qualitative techniques are proposed for the estimation of incremental and accelerated recovery based upon readily available production data. In the first technique, acceleration and incremental recovery, and thus infill drilling, are predicted from the trend of the cumulative production (Gp) versus square root time function. This approach is more applicable for tight formations considering the long period of transient linear flow. The second technique is based on multi-well Blasingame type curves analysis. This technique appears to best be applied when the production of parent wells reaches the boundary dominated flow (BDF) region before the production start of the successive infill wells. These techniques are important in field development planning as the flow regimes in tight formations change gradually from transient flow (early times) to BDF (late times) as the production continues. Despite different approaches/methods, the field case studies demonstrate that the accurate framework for strategic well planning including prediction of optimum well location is very critical, especially for the realization of the commercial benefit (i.e., increasing and accelerating of reserve or assets) from infilled drilling campaign. Also, the proposed framework and findings of this study provide new insight into infilled drilling campaigns including the importance of better evaluation of infill drilling performance in tight formations, which eventually assist on informed decisions process regarding future development plans.

A novel method for improving drilling performance of CFRP/Ti6AL4V stacked materials

2021 ◽  
Author(s):  
Nafiz Yaşar ◽  
Mehmet Erdi Korkmaz ◽  
Munish Kumar Gupta ◽  
Mehmet Boy ◽  
Mustafa Günay
Keyword(s):  
Drilling Performance ◽  
Novel Method
Sign in / Sign up

Export Citation Format

Share Document