Integration of Production, Pressure Transient and Borehole Images in Horizontal Wells Drilled in Cambrian Sandstone Reservoirs of Hassi Messaoud Field, Algeria

2009 ◽  
Author(s):  
Taofeek Ogunyemi ◽  
Philippe Jean Montaggioni ◽  
Atmane Azzouguen ◽  
Mourad Kourta ◽  
Said Kodja ◽  
...  
Keyword(s):  
Horizontal Wells ◽  
Pressure Transient ◽  
Sandstone Reservoirs

Revision of Pressure Transient Analysis in Mature Condensate-Rich Tight Gas Fields in Sultanate of Oman

2022 ◽  
Author(s):  
Ahmed Elsayed Hegazy ◽  
Mohammed Rashdi
Keyword(s):  
Transient Analysis ◽  
Horizontal Wells ◽  
Development Planning ◽  
Reservoir Modeling ◽  
Sultanate Of Oman ◽  
Pressure Transient Analysis ◽  
Pressure Transient ◽  
Full Field ◽  
Gas Fields ◽  
Half Length

Abstract Pressure transient analysis (PTA) has been used as one of the important reservoir surveillance tools for tight condensate-rich gas fields in Sultanate of Oman. The main objectives of PTA in those fields were to define the dynamic permeability of such tight formations, to define actual total Skin factors for such heavily fractured wells, and to assess impairment due to condensate banking around wellbores. After long production, more objectives became also necessary like assessing impairment due to poor clean-up of fractures placed in depleted layers, assessing newly proposed Massive fracturing strategy, assessing well-design and fracture strategies of newly drilled Horizontal wells, targeting the un-depleted tight layers, and impairment due to halite scaling. Therefore, the main objective of this paper is to address all the above complications to improve well and reservoir modeling for better development planning. In order to realize most of the above objectives, about 21 PTA acquisitions have been done in one of the mature gas fields in Oman, developed by more than 200 fractured wells, and on production for 25 years. In this study, an extensive PTA revision was done to address main issues of this field. Most of the actual fracture dynamic parameters (i.e. frac half-length, frac width, frac conductivity, etc.) have been estimated and compared with designed parameters. In addition, overall wells fracturing responses have been defined, categorized into strong and weak frac performances, proposing suitable interpretation and modeling workflow for each case. In this study, more reasonable permeability values have been estimated for individual layers, improving the dynamic modeling significantly. In addition, it is found that late hook-up of fractured wells leads to very poor fractures clean out in pressure-depleted layers, causing the weak frac performance. In addition, the actual frac parameters (i.e. frac-half-length) found to be much lower than designed/expected before implementation. This helped to improve well and fracturing design and implementation for next vertical and horizontal wells, improving their performances. All the observed PTA responses (fracturing, condensate-banking, Halite-scaling, wells interference) have been matched and proved using sophisticated single and sector numerical simulation models, which have been incorporated into full-field models, causing significant improvements in field production forecasts and field development planning (FDP).

A Comprehensive Model Integrating the Stress Sensitivity for Pressure Transient Behavior Study on the Two-Zone System for Offshore Loose Sandstone Reservoirs

2021 ◽  
Author(s):  
Chong Cao ◽  
Linsong Cheng ◽  
Xiangyang Zhang ◽  
Pin Jia ◽  
Wenpei Lu
Keyword(s):  
Flow Regimes ◽  
Transient Behavior ◽  
Stress Sensitivity ◽  
Composite Model ◽  
Zone Model ◽  
Well Testing ◽  
Comprehensive Model ◽  
Pressure Transient ◽  
Sandstone Reservoirs ◽  
Sandstone Formation

Abstract Permeability changes in the weakly consolidated sandstone formation, caused by sand migration, has a serious impact on the interpretation of well testing and production prediction. In this article, a two-zone comprehensive model is presented to describe the changes in permeability by integrating the produced sand, stress sensitivity characteristics. In this model, inner zone is modeled as a higher permeability radial reservoir because of the sand migration, while the outer zone is considered as a lower permeability reservoir. Besides, non-Newtonian fluid flow characteristics are considered as threshold pressure gradient in this paper. As a result, this bi-zone comprehensive model is built. The analytical solution to this composite model can be obtained using Laplace transformation, orthogonal transformation, and then the bottomhole pressure in real space can be solved by Stehfest and perturbation inversion techniques. Based on the oilfield cases validated in the oilfield data from the produced sand horizontal well, the flow regimes analysis shows seven flow regimes can be divided in this bi-zone model considering stress sensitive. In addition, the proposed new model is validated by the compassion results of traditional method without the complex factors. Besides, the effect related parameters of stress sensitivity coefficient, skin factor, permeability ratio and sanding radius on the typical curves of well-testing are analyzed. This work introduces two-zone composite model to reflect the variations of permeability caused by the produced sand in the unconsolidated sandstone formation, which can produce great influence on pressure transient behavior. Besides, this paper can also provide a more accurate reference for reservoir engineers in well test interpretation of loose sandstone reservoirs.

Pressure-Transient Behavior of Horizontal Wells With and Without Gas Cap or Aquifer

1991 ◽  
Vol 6 (01) ◽  
pp. 86-94 ◽  
Author(s):  
F.J. Kuchuk ◽  
P.A. Goode ◽  
D.J. Wilkinson ◽  
R.K.M. Thambynayagam
Keyword(s):  
Horizontal Wells ◽  
Transient Behavior ◽  
Pressure Transient
Sign in / Sign up

Export Citation Format

Share Document