Case Study: The Use of Downhole Control Valves To Sustain Oil Production From the First Maximum Reservoir Contact, Multilateral, and Smart Completion Well in Ghawar Field

2008 ◽  
Vol 23 (04) ◽  
pp. 427-430 ◽  
Author(s):  
Saeed Mohammed Al-Mubarak ◽  
Tony Reuben Pham ◽  
Sultan S. Shamrani ◽  
Muhammad Shafiq
Keyword(s):  
Oil Production ◽  
Control Valves ◽  
Ghawar Field

Evaluation of CO2 Gas Injection For Major Oil Production Fields in Malaysia - Experimental Approach Case Study: Dulang Field

2001 ◽  
Author(s):  
Zahidah Md. Zain ◽  
Nor Idah Kechut ◽  
Ganesan Nadeson ◽  
Noraini Ahmad ◽  
D.M. Anwar Raja
Keyword(s):  
Experimental Approach ◽  
Gas Injection ◽  
Oil Production ◽  
Co2 Gas

Undersaturated Hydrocarbon Reservoir Waterflooding: A simulation Approach to Performance Assessment

2021 ◽  
Author(s):  
Adekunle Tirimisiyu Adeniyi ◽  
Miracle Imwonsa Osatemple ◽  
Abdulwahab Giwa
Keyword(s):  
Oil Recovery ◽  
Net Present Value ◽  
Oil Production ◽  
Base Case ◽  
Present Value ◽  
Sweep Efficiency ◽  
Recovery Method ◽  
Solution Approach ◽  
Hydrocarbon Reservoir

Abstract There are a good numbers of brown hydrocarbon reservoirs, with a substantial amount of bypassed oil. These reservoirs are said to be brown, because a huge chunk of its recoverable oil have been produced. Since a significant number of prominent oil fields are matured and the number of new discoveries is declining, it is imperative to assess performances of waterflooding in such reservoirs; taking an undersaturated reservoir as a case study. It should be recalled that Waterflooding is widely accepted and used as a means of secondary oil recovery method, sometimes after depletion of primary energy sources. The effects of permeability distribution on flood performances is of concerns in this study. The presence of high permeability streaks could lead to an early water breakthrough at the producers, thus reducing the sweep efficiency in the field. A solution approach adopted in this study was reserve water injection. A reverse approach because, a producing well is converted to water injector while water injector well is converted to oil producing well. This optimization method was applied to a waterflood process carried out on a reservoir field developed by a two - spot recovery design in the Niger Delta area of Nigeria that is being used as a case study. Simulation runs were carried out with a commercial reservoir oil simulator. The result showed an increase in oil production with a significant reduction in water-cut. The Net Present Value, NPV, of the project was re-evaluated with present oil production. The results of the waterflood optimization revealed that an increase in the net present value of up to 20% and an increase in cumulative production of up to 27% from the base case was achieved. The cost of produced water treatment for re-injection and rated higher water pump had little impact on the overall project economy. Therefore, it can conclude that changes in well status in wells status in an heterogenous hydrocarbon reservoir will increase oil production.

Tubing Straddle System to Restores Oil Production Using Digital Slickline Conveyance A Case Study

2020 ◽  
Author(s):  
Syed Zubair Gilani ◽  
Wuroud Mohammed Alfadhli ◽  
Ravi Kurma ◽  
Yousef Al-Mansour ◽  
Mousa Al-Sulaili ◽  
...  
Keyword(s):  
Oil Production
Sign in / Sign up

Export Citation Format

Share Document