Examples of Fractured Carbonate Reservoir Rocks of Russia and Relationship Between Porosity and Permeability in Carbonate Rocks

2008 ◽  
Author(s):  
George V. Chilingar ◽  
Muhammad Raeef Haroun ◽  
Kseniya I. Bagrintseva
Keyword(s):  
Carbonate Rocks ◽  
Carbonate Reservoir ◽  
Reservoir Rocks ◽  
Fractured Carbonate ◽  
Porosity And Permeability

Using Logging and Seismic Data to Identify Boundaries Between Different OWC Units in a Deepwater Carbonate Reservoirs

2021 ◽  
Author(s):  
Kangxu Ren ◽  
Junfeng Zhao ◽  
Jian Zhao ◽  
Xilong Sun
Keyword(s):  
Seismic Data ◽  
Carbonate Rocks ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Sedimentary Process ◽  
Core Samples ◽  
Tight Carbonate ◽  
Porosity And Permeability ◽  
Seismic Sections ◽  
Parameters Inversion

Abstract At least three very different oil-water contacts (OWC) encountered in the deepwater, huge anticline, pre-salt carbonate reservoirs of X oilfield, Santos Basin, Brazil. The boundaries identification between different OWC units was very important to help calculating the reserves in place, which was the core factor for the development campaign. Based on analysis of wells pressure interference testing data, and interpretation of tight intervals in boreholes, predicating the pre-salt distribution of igneous rocks, intrusion baked aureoles, the silicification and the high GR carbonate rocks, the viewpoint of boundaries developed between different OWC sub-units in the lower parts of this complex carbonate reservoirs had been better understood. Core samples, logging curves, including conventional logging and other special types such as NMR, UBI and ECS, as well as the multi-parameters inversion seismic data, were adopted to confirm the tight intervals in boreholes and to predicate the possible divided boundaries between wells. In the X oilfield, hundreds of meters pre-salt carbonate reservoir had been confirmed to be laterally connected, i.e., the connected intervals including almost the whole Barra Velha Formation and/or the main parts of the Itapema Formation. However, in the middle and/or the lower sections of pre-salt target layers, the situation changed because there developed many complicated tight bodies, which were formed by intrusive diabase dykes and/or sills and the tight carbonate rocks. Many pre-salt inner-layers diabases in X oilfield had very low porosity and permeability. The tight carbonate rocks mostly developed either during early sedimentary process or by latter intrusion metamorphism and/or silicification. Tight bodies were firstly identified in drilled wells with the help of core samples and logging curves. Then, the continuous boundary were discerned on inversion seismic sections marked by wells. This paper showed the idea of coupling the different OWC units in a deepwater pre-salt carbonate play with complicated tight bodies. With the marking of wells, spatial distributions of tight layers were successfully discerned and predicated on inversion seismic sections.

Improving Porosity–Velocity Relationships Using Carbonate Pore Types

2015 ◽  
Vol 23 (04) ◽  
pp. 1540006 ◽  
Author(s):  
Tingting Zhang ◽  
Yuefeng Sun ◽  
Qifeng Dou ◽  
Hanrong Zhang ◽  
Tonglou Guo ◽  
...  
Keyword(s):  
Pore Structure ◽  
Acoustic Impedance ◽  
Carbonate Rocks ◽  
Seismic Inversion ◽  
Carbonate Reservoir ◽  
Reservoir Rocks ◽  
Fluid Content ◽  
Fracture Fluid ◽  
Poroelastic Model ◽  
Pore Types

Acoustic impedance in carbonates is influenced by factors such as porosity, pore structure/fracture, fluid content, and lithology. Occurrence of moldic and vuggy pores, fractures and other pore structures due to diagenesis in carbonate rocks can greatly complicate the relationships between impedance and porosity. Using a frame flexibility factor ([Formula: see text]) derived from a poroelastic model to characterize pore structure in reservoir rocks, we find that its product with porosity can result in a much better correlation with sonic velocity ([Formula: see text] = [Formula: see text]) and acoustic impedance ([Formula: see text] = [Formula: see text], where A, B, C and D is 6.60, 0.03, 18.3 and 0.09, respectively for the deep low-porosity carbonate reservoir studied in this paper. These new relationships can also be useful in improving seismic inversion of ultra-deep hydrocarbon reservoirs in other similar environments.

Notes on Carbonate Reservoir Rocks, No. 4: Determination of Permeability of Carbonate Rocks from Thin-Section Analysis

1986 ◽  
Vol 8 (4) ◽  
pp. 369-380 ◽  
Author(s):  
George V. Chilingarian ◽  
Chum Yang Zhang ◽  
Moayed Yusif Al-Bassam ◽  
Teh Fu Yen
Keyword(s):  
Thin Section ◽  
Carbonate Rocks ◽  
Carbonate Reservoir ◽  
Reservoir Rocks ◽  
Thin Section Analysis ◽  
Section Analysis

Predicting acoustic-wave velocities and fluid sensitivity to elastic properties in fractured carbonate formation

2017 ◽  
Vol 5 (1) ◽  
pp. SB69-SB80 ◽  
Author(s):  
Jingjing Xu ◽  
Maojin Tan ◽  
Xiaochang Wang ◽  
Chunping Wu
Keyword(s):  
Elastic Properties ◽  
Carbonate Rocks ◽  
Seismic Inversion ◽  
Carbonate Reservoir ◽  
S Wave ◽  
Mineral Concentration ◽  
Fracture Porosity ◽  
Wave Velocities ◽  
Carbonate Formation ◽  
Fractured Carbonate

Estimation of S-wave velocity is one of the most critical steps for prestack seismic inversion. Based on the petrophysical model of fractured carbonate rocks, theoretical methods are firstly investigated for estimating P- and S-wave velocities in the presence of fractures. Then, the methods of calculating elastic properties in fractured carbonate rocks are discussed. The mineral concentration, total porosity, and fracture porosity from core X-ray diffraction and routine core measurements or log interpretation results are used to estimate the P- and S-wave velocities. In the given carbonate rock model, the elastic properties of carbonate rocks with different porosity and fractures are calculated. Two field tests prove that the proposed new method is effective and accurate. Furthermore, the model is useful for fluid identification, which is one of the most outstanding problems for carbonate reservoir description. The simulation results suggest that the larger the fracture porosity is, the easier fluid typing. In Tahe Oilfield, the elastic properties of different fluid zones indicate that bulk modulus and Young’s modulus are more sensitive to fluid than shear modulus, the Lamé constant, and Poisson’s ratio.

Predicting subsurface CO2 movement: From laboratory to field scale

Geophysics ◽  
2012 ◽  
Vol 77 (3) ◽  
pp. M27-M37 ◽  
Author(s):  
Ranjana Ghosh ◽  
Mrinal K. Sen
Keyword(s):  
Elastic Properties ◽  
Carbonate Rocks ◽  
Water Saturation ◽  
Time Lapse ◽  
Carbonate Reservoir ◽  
S Wave ◽  
Permeability Enhancement ◽  
Proposed Model ◽  
Porosity And Permeability ◽  
Frequency Dependent Model

Finding an appropriate model for time-lapse seismic monitoring of [Formula: see text]-sequestered carbonate reservoir poses a great challenge because carbonate-rocks have varying textures and highly reactive rock-fluid system. We introduced a frequency-dependent model based on Eshelby’s inclusion and differential effective medium (DEM) theory that can account for heterogeneity in microstructure of rocks and squirt flow. We showed that the estimated velocities from the modified DEM theory match well with the laboratory measurements (ultrasonic) of velocities of carbonate rocks saturated with [Formula: see text]-rich water. The theory predicts significant decrease in saturated P- and S-wave velocities in the seismic frequency band as a consequence of porosity and permeability enhancement by the process of chemical dissolution of carbonates with the saturating fluid. The study also showed the combined effect of chemical reaction and free [Formula: see text] saturation on the elastic properties of rock. We observed that the velocity dispersion and attenuation increased from complete gas saturation to water saturation. The proposed model can be used to invert geophysical measurements to detect changes in elastic properties of a carbonate reservoir and interpret the extent of [Formula: see text] movement with time. These are the key elements to ensure that sequestration will not damage underground geologic formation and [Formula: see text] storage is secure and environmentally acceptable.

scholarly journals Liquid and Gas Corrected Permeability Correlation for Heterogeneous Carbonate Reservoir Rocks

2020 ◽  
pp. 36-50
Author(s):  
Sadonya Jamal Mustafa ◽  
Fraidoon Rashid ◽  
Khalid Mahmmud Ismail
Keyword(s):  
Gas Permeability ◽  
Carbonate Reservoir ◽  
Reservoir Rock ◽  
Reservoir Properties ◽  
Reservoir Rocks ◽  
Rock Types ◽  
Liquid Permeability ◽  
Porosity And Permeability ◽  
Permeability Distribution ◽  
Reservoir Type

Permeability is considered as an efficient parameter for reservoir modelling and simulation in different types of rocks. The performance of a dynamic model for estimation of reservoir properties based on liquid permeability has been widely established for reservoir rocks. Consequently, the validated module can be applied into another reservoir type with examination of the validity and applicability of the outcomes. In this study the heterogeneous carbonate reservoir rock samples of the Tertiary Baba Formation have been collected to create a new module for estimation of the brine permeability from the corrected gas permeability. In addition, three previously published equations of different reservoir rock types were evaluated using the heterogenous carbonate samples. The porosity and permeability relationships, permeability distribution, pore system and rock microstructures are the dominant factors that influenced on the limitation of these modules for calculating absolute liquid permeability from the klinkenberg-corrected permeability. The most accurate equation throughout the selected samples in this study was the heterogenous module and the lowest quality permeability estimation was derived from the sandstone module.

Sign in / Sign up

Export Citation Format

Share Document