scholarly journals Autogenic Erosional Surfaces in Fluvio-deltaic Stratigraphy from Floods, Avulsions, and Backwater Hydrodynamics

2019 ◽  
Vol 89 (8) ◽  
pp. 815-832 ◽  
Author(s):  
Vamsi Ganti ◽  
Michael P. Lamb ◽  
Austin J. Chadwick

Abstract Erosional surfaces set the architecture of fluvio-deltaic stratigraphy, and they have classically been interpreted in terms of changes in boundary conditions such as climate, tectonics, and base level (allogenic forces). Intrinsic dynamics of sedimentary systems (autogenic dynamics) can also create a rich stratigraphic architecture, and a major knowledge gap exists in parsing the relative roles of autogenic versus allogenic processes. Emerging theoretical and experimental work suggests that backwater hydrodynamics play an important role in driving transient channel incision in river deltas, even those experiencing net aggradation. Here, we identify and quantify two autogenic mechanisms that produce broad erosional surfaces in fluvio-deltaic stratigraphy, namely, floods and avulsions. Using a simple mass-balance model for single-threaded delta channel systems, we show that flood-induced scours begin near the shoreline, and avulsion-induced scours begin at the avulsion site, and both propagate upstream over a distance that scales with the backwater length, bed slope, and bed grain size. We also develop scaling relationships for the maximum scour depths arising from these mechanisms, which are functions of characteristic flow depth and formative flood variability. We test our theoretical predictions using a flume experiment of river delta evolution governed by persistent backwater hydrodynamics under constant relative sea level. Results indicate that autogenic dynamics of backwater-mediated deltas under conditions of constant base level can result in stratigraphic surfaces and shoreline trajectories similar to those often interpreted to represent multiple sea-level cycles. Our work provides a quantitative framework to decouple autogenic and allogenic controls on erosional surfaces preserved in fluvio-deltaic stratigraphy.

2018 ◽  
Author(s):  
Fabien Maussion ◽  
Anton Butenko ◽  
Julia Eis ◽  
Kévin Fourteau ◽  
Alexander H. Jarosch ◽  
...  

Abstract. Despite of their importance for sea-level rise, seasonal water availability, and as source of geohazards, mountain glaciers are one of the few remaining sub-systems of the global climate system for which no globally applicable, open source, community-driven model exists. Here we present the Open Global Glacier Model (OGGM, http://www.oggm.org), developed to provide a modular and open source numerical model framework for simulating past and future change of any glacier in the world. The modelling chain comprises data downloading tools (glacier outlines, topography, climate, validation data), a preprocessing module, a mass-balance model, a distributed ice thickness estimation model, and an ice flow model. The monthly mass-balance is obtained from gridded climate data and a temperature index melt model. To our knowledge, OGGM is the first global model explicitly simulating glacier dynamics: the model relies on the shallow ice approximation to compute the depth-integrated flux of ice along multiple connected flowlines. In this paper, we describe and illustrate each processing step by applying the model to a selection of glaciers before running global simulations under idealized climate forcings. Even without an in-depth calibration, the model shows a very realistic behaviour. We are able to reproduce earlier estimates of global glacier volume by varying the ice dynamical parameters within a range of plausible values. At the same time, the increased complexity of OGGM compared to other prevalent global glacier models comes at a reasonable computational cost: several dozens of glaciers can be simulated on a personal computer, while global simulations realized in a supercomputing environment take up to a few hours per century. Thanks to the modular framework, modules of various complexity can be added to the codebase, allowing to run new kinds of model intercomparisons in a controlled environment. Future developments will add new physical processes to the model as well as tools to calibrate the model in a more comprehensive way. OGGM spans a wide range of applications, from ice-climate interaction studies at millenial time scales to estimates of the contribution of glaciers to past and future sea-level change. It has the potential to become a self-sustained, community driven model for global and regional glacier evolution.


2011 ◽  
Vol 11 (4) ◽  
pp. 12207-12250 ◽  
Author(s):  
L. Yurganov ◽  
V. Rakitin ◽  
A. Dzhola ◽  
T. August ◽  
E. Fokeeva ◽  
...  

Abstract. Data are presented from three space sounders and two ground-based spectrometers in Moscow and its suburbs during the forest and peat fires that occurred in Central Russia in July–August 2010. The Moscow area was strongly impacted by the CO plume from these fires. Concurrent satellite- and ground-based observations were used to quantify the errors of CO top-down emission estimates. On certain days, CO total columns retrieved from the data of the space-based sounders were 2–3 times less than those obtained from the ground-based sun-tracking spectrometers. The depth of the polluted layer over Moscow was estimated using total column measurements compared with CO volume mixing ratios in the surface layer and on the TV tower and found to be between 180 and 360 m. The missing CO that is the average difference between the CO total column accurately determined by the ground spectrometer and that retrieved by MOPITT and AIRS, was determined for the Moscow area as ∼3 E18 molec cm−2. This value was extrapolated onto the entire plume; subsequently, the CO burden (total mass) over Russia during the fire event was corrected. A top-down estimate of the total emitted CO, obtained by a simple mass balance model increased by 80%–100% due to this correction (up to 40 Tg).


Science ◽  
2018 ◽  
Vol 361 (6399) ◽  
pp. 273-277 ◽  
Author(s):  
L. A. Stearns ◽  
C. J. van der Veen

The largest uncertainty in the ice sheet models used to predict future sea level rise originates from our limited understanding of processes at the ice/bed interface. Near glacier termini, where basal sliding controls ice flow, most predictive ice sheet models use a parameterization of sliding that has been theoretically derived for glacier flow over a hard bed. We find that this sliding relation does not apply to the 140 Greenland glaciers that we analyzed. There is no relationship between basal sliding and frictional stress at the glacier bed, contrary to theoretical predictions. There is a strong relationship between sliding speed and net pressure at the glacier bed. This latter finding is in agreement with earlier observations of mountain glaciers that have been largely overlooked by the glaciological community.


2021 ◽  
Author(s):  
Jose Silvestre ◽  
Kelly Sanks ◽  
Sam Zapp ◽  
Dutt Ripul ◽  
John Shaw ◽  
...  

<p>Many deltas contain extensive marshes, typically defined as laterally extensive, low energy settings tied to a narrow elevation window around sea level. Biological activity in marshes results in in-situ organic sediment accumulation that has the potential to be stored in the sedimentary record. However, it is unclear how marshes interact with channels that transport the clastic sediment and typically control autogenic stratigraphic architecture. We present results from a physical experiment designed to explore the coupled evolution of marshes and deltas over geologic timescales. In the experiment, deltaic channels self-organized due to constant input rates of water and clastic sediment that experience constant long-term accommodation production through sea-level rise. A low bulk density kaolinite clay was deposited on the delta-top following rules developed by the ecology community for in-situ organic production. The kaolinite clay serves as a proxy for the in-situ organic sediments in overbank regions. As such, the autogenic processes of the clastic transport system, which influence elevation relative to sea-level, also exert a control on the scales of preserved organic-rich strata. We quantify the fraction of the organic sediment proxy in the fluvio-deltaic deposit to define a transfer function between the accumulation of organic sediment and its preservation beneath the morphodynamically active layer. We also use synthetic stratigraphy and images of the preserved strata to characterize the spatial arrangements of organic strata, and the influence of marshes on the resulting arrangement of channel bodies. Initial findings suggest that the thickest seams are located near the mean shoreline but extend significant distances from this location due to autogenic shoreline transgressions and regressions. Quantifying these trends will inform our understanding of how in-situ organic sediment accumulation influences clastic transport systems and the structure of deltaic stratigraphy.</p>


1995 ◽  
Vol 21 ◽  
pp. 297-303 ◽  
Author(s):  
Renji Naruse ◽  
Masamu Aniya ◽  
Pedro Skvarca ◽  
Gino Gasassa

Large retreats were revealed for most glaciers in Patagonia, South America, by analyzing satellite images and air photographs. For example, Glaciar O’Higgins retreated 13 km during 41 years from 1945 to 1986 and Glaciar Upsala retreated about 3 km between 1968 and 1990. During the 41 years former period, however, the southern tongue of Glaciar Pio XI advanced by up to 8.5 km and Glaciar Moreno remained almost in a steady state. Considerable ice-thinning rates, from 3.0 to 11 ma−1, were measured by surveying surface profiles in the ablation areas of Tyndall and Upsala glaciers, respectively, during the period from 1985 (or 1990) to 1993. The ice thickness of Glaciar Moreno, however, has changed very little. Numerical experiments using a simple mass-balance model show that a 100 m rise in the equilibrium-line altitude due to climatic change would result in about a 200–350 m rise in the frontal altitude at Glaciar Upsala corresponding to a retreat of 5–8 km, while it would cause only about a 70–100 m rise at Glaciar Moreno. The large difference between these two neighbouring glaciers results from the difference in contributions of the calving amount to the total mass balance, as well as the difference in the altitudinal distributions of drainage areas.


2019 ◽  
Vol 12 (3) ◽  
pp. 909-931 ◽  
Author(s):  
Fabien Maussion ◽  
Anton Butenko ◽  
Nicolas Champollion ◽  
Matthias Dusch ◽  
Julia Eis ◽  
...  

Abstract. Despite their importance for sea-level rise, seasonal water availability, and as a source of geohazards, mountain glaciers are one of the few remaining subsystems of the global climate system for which no globally applicable, open source, community-driven model exists. Here we present the Open Global Glacier Model (OGGM), developed to provide a modular and open-source numerical model framework for simulating past and future change of any glacier in the world. The modeling chain comprises data downloading tools (glacier outlines, topography, climate, validation data), a preprocessing module, a mass-balance model, a distributed ice thickness estimation model, and an ice-flow model. The monthly mass balance is obtained from gridded climate data and a temperature index melt model. To our knowledge, OGGM is the first global model to explicitly simulate glacier dynamics: the model relies on the shallow-ice approximation to compute the depth-integrated flux of ice along multiple connected flow lines. In this paper, we describe and illustrate each processing step by applying the model to a selection of glaciers before running global simulations under idealized climate forcings. Even without an in-depth calibration, the model shows very realistic behavior. We are able to reproduce earlier estimates of global glacier volume by varying the ice dynamical parameters within a range of plausible values. At the same time, the increased complexity of OGGM compared to other prevalent global glacier models comes at a reasonable computational cost: several dozen glaciers can be simulated on a personal computer, whereas global simulations realized in a supercomputing environment take up to a few hours per century. Thanks to the modular framework, modules of various complexity can be added to the code base, which allows for new kinds of model intercomparison studies in a controlled environment. Future developments will add new physical processes to the model as well as automated calibration tools. Extensions or alternative parameterizations can be easily added by the community thanks to comprehensive documentation. OGGM spans a wide range of applications, from ice–climate interaction studies at millennial timescales to estimates of the contribution of glaciers to past and future sea-level change. It has the potential to become a self-sustained community-driven model for global and regional glacier evolution.


2019 ◽  
Author(s):  
Philippos Garefalakis ◽  
Fritz Schlunegger

Abstract. The stratigraphic architecture of the Swiss Molasse basin reveals crucial information about the basin’s geometry, its evolution and the processes leading to the deposition of the clastic material. Nevertheless, the formation of the Upper Marine Molasse (OMM) and the controls on the related Burdigalian transgression are not fully understood yet. During these times, from c. 20 to 17 Ma, the Swiss Molasse basin was partly flooded by a peripheral shallow marine sea, striking SW – NE. We proceeded through detailed sedimentological and stratigraphic examinations of several sites across the entire Swiss Molasse basin in order to deconvolve the stratigraphic signals related surface and tectonic controls. Surface-related signals include stratigraphic responses to changes in eustatic sea level and sediment fluxes, while the focus on crustal-scale processes lies on the uplift of the Aar-massif at c. 20 Ma. Field examinations show, that the evolution of the Burdigalian seaway was characterized by (i) shifts in the depositional settings, (ii) changes in discharge directions, a deepening and widening of the basin, and (iv) phases of erosion and non-deposition. We relate these changes in the stratigraphic records to a combination of surface and tectonic controls at various scales. In particular, roll-back subduction of the European mantle lithosphere, delamination of crustal material and the associated rise of the Aar-massif most likely explain the widening of the basin particular at distal sites. In addition, the uplift of the Aar-massif was likely to have shifted the patterns of surface loads. These mechanisms could have caused a flexural adjustment of the foreland plate underneath the Molasse basin, which we use as mechanism to explain the establishment of distinct depositional environments and particularly the formation of subtidal-shoals where a lateral bulge is expected. In the Alpine hinterland, these processes occurred simultaneously with a period of fast tectonic exhumation accomplished through slip along the Simplon detachment fault, with the consequence that sediment flux to the basin decreased. It is possible that this reduction in sediment supply contributed to the establishment of marine conditions in the Swiss Molasse basin and thus amplified the effect related to the tectonically controlled widening of the basin. Because of the formation of shallow marine conditions, subtle changes in the eustatic sea level contributed to the occurrence several hiatus that chronicle periods of erosion and non-sedimentation. While these mechanisms are capable of explaining the establishment of the Burdigalian seaway and the formation of distinct sedimentological niches in the Swiss Molasse basin, the drainage reversal during OMM-times possibly requires a change in the tectonic processes at the slab scale. We conclude that sedimentological records can be used to decipher surface controls and lithospheric-scale processes in orogens from the stratigraphic record, provided that a detailed sedimentological and chronological database is available.


2006 ◽  
Vol 177 (1) ◽  
pp. 27-36 ◽  
Author(s):  
Ludovic Mocochain ◽  
Georges Clauzon ◽  
Jean-Yves Bigot

Abstract The Messinian salinity crisis is typically recorded by evaporites in the abyssal plains of the Mediterranean Sea and by canyons incised into the Mediterranean margins and their hinterlands. However, the impacts of crisis on geomorphology and surface dynamics lasted, until canyons were filled by sediments in the Pliocene (fig. 2). In the mid-Rhône valley, the Ardeche Cretaceous carbonate platform is incised over 600 m by the Rhône Messinian canyon. The canyon thalweg is located – 236 m bsl (below sea level) in the borehole of Pierrelatte [Demarcq, 1960; fig. 1]. During the Pliocene, this canyon was flooded as a ria and infilled by a Gilbert type fan delta [Clauzon and Rubino, 1992; Clauzon et al., 1995]. The whole Messinian-Pliocene third order cycle [Haq et al., 1987] generated four benchmark levels. The first two are [Clauzon, 1996]: (i) The pre-evaporitic abandonment surface which is mapped around the belvedere of Saint-Restitut (fig. 1). This surface is synchronous [Clauzon, 1996] of the crisis onset (5.95 Ma) [Gautier et al., 1994; Krigjsman et al., 1999] and, consequently, is an isochronous benchmark. (ii) The Messinian erosional surface is also an isochronous benchmark due to the fast flooding [Blanc, 2002] of the Rhône canyon, becoming a ria at 5.32 Ma [Hilgen and Langereis, 1988]. These surfaces are the result of endoreic Mediterranean sea level fall more than a thousand meters below the Atlantic Ocean. A huge accommodation space (up to more than 1000 m) was created as sea-level rose up to 80 m above its present-day level (asl) during the Pliocene highstand of cycle TB 3.4 (from 5.32 to 3.8 Ma). During the Lower Pliocene this accommodation space was filled by a Gilbert fan delta. This history yields two other benchmark levels: (i) the marine/non marine Pliocene transition which is an heterochronous surface produced by the Gilbert delta progradation. This surface recorded the Pliocene highstand sea level; (ii) the Pliocene abandonment surface at the top of the Gilbert delta continental wedge. Close to the Rhône-Ardeche confluence, the present day elevations of the four reference levels are (evolution of base-level synthesized in fig. 4): (1) 312 m asl, (2) 236 m bsl, (3) 130 m asl, (4) 190 m asl. The Ardèche carbonate platform underwent karstification both surficial and at depth. The endokarst is characterized by numerous cavities organised in networks. Saint-Marcel Cave is one of those networks providing the most complete record (fig. 5). It opens out on the northern side of the Ardeche canyon at an altitude of 100 m. It is made up by three superposed levels extending over 45 km in length. The lower level (1) is flooded and functionnal. It extends beneath the Ardeche thalweg down to the depth of 10 m bsl reached by divers. The observations collected in the galleries lead us to the conclusion that the karst originated in the vadose area [Brunet, 2000]. The coeval base-level was necessarily below those galleries. The two other levels (middle (2) and upper (3)) are today abandoned and perched. The middle level is about 115 m asl and the upper one is about 185 m asl. They are horizontal and have morphologies specific to the phreatic and temporary phreatic zone of the karst (fig. 6). In literature, the terracing of the Saint-Marcel Cave had been systematically interpreted as the result of the lowering by steps of the Ardeche base-level [Guérin, 1973; Blanc, 1995; Gombert, 1988; Debard, 1997]. In this interpretation, each deepening phase of the base level induces the genesis of the gravitary shaft and the abandonment of the previous horizontal level. The next stillstand of base level leads to the elaboration of a new horizontal level (fig. 7). This explanation is valid for most of Quaternary karsts, that are related to glacioeustatic falls of sea-level. However our study on the Saint-Marcel Cave contests this interpretation because all the shafts show an upward digging dynamism and no hint of vadose sections. The same “per ascensum” hydrodynamism was prevailing during the development of the whole network (figs. 8 and 9). We interpret the development of the Ardeche endokarst as related to the eustatic Messinian-Pliocene cycle TB 3.4/3.5 recorded by the Rhône river. The diving investigations in the flooded part of the Saint-Marcel Cave and also in the vauclusian springs of Bourg-Saint-Andeol reached - 154 m bsl. Those depths are compatible only with the incision of the Messinian Rhône canyon at the same altitude (−236 m bsl). The Saint-Marcel lower level would have develop at that time. The ascending shaping of levels 2 and 3 is thus likely to have formed during the ensuing sea-level rise and highstand during the Pliocene, in mainly two steps: (i) the ria stage controlled by the Mediterranean sea level rise and stillstand; (ii) the rhodanian Gilbert delta progradation, that controlled the genesis of the upper level (fig. 10).


2020 ◽  
Author(s):  
Johan M. Bonow ◽  
Peter Japsen ◽  
Paul F. Green ◽  
James A. Chalmers

<p>Many passive continental margins around the world are characterised by elevated plateaus at 1 to 2 km or more above sea level cut by deeply incised valleys and commonly separated from an adjacent coastal plain by one or more escarpments. Mesozoic–Cenozoic rift systems parallel to the coast are commonly present offshore with a transition from continental to oceanic crust further offshore. These landscapes occur in arctic, temperate and tropical climate and in different geological settings independent of the time span since break-up (e.g. along the Atlantic from south to north).</p><p>The plateaux are typically more than 100 km wide, much larger in some cases, and extend hundreds of kilometres along the margin, cutting across bedrock of different ages and resistances. The key to understanding the formation of regional, low-relief erosion surfaces is the base-level, as this is the level to which fluvial systems grade the landscape. The most likely base level is sea level, particularly for locations along continental margins during the post-rift development of passive margins.</p><p>It is commonly assumed that the characteristic, large-scale morphology of elevated, passive continental margins with  high-level plateaux and deeply incised valleys persisted since rifting and crustal separation Further, it is assumed that the absence of post-rift sediments is evidence of non-deposition, despite continental-stretching theory predicting deposition of a thick post-rift sequence overlying both the rift and its margins.</p><p>However, our studies of the passive continental margins of West and East Greenland, Norway, NE Brazil and southern Africa provide evidence of km-scale, post-rift subsidence and that the plateau surfaces were graded to sea level long after break-up and subsequently lifted to their present elevations. In some of these cases, the presence of post-rift marine sediments at high elevation provide direct proof of this interpretation. Since elevated plateaux cut by deeply incised valleys are a characteristic feature of these and other margins, this similarity suggests that such topography elsewhere in the world may also be unrelated to the processes of rifting and continental separation. We present a wide range of evidence from passive margins around the world in support of this hypothesis,</p><p> </p><p>Bonow et al. 2014: High-level landscapes along the margin of East Greenland – a record of tectonic uplift and incision after breakup in the NE Atlantic. Global and Planetary Change.</p><p>Green et al. 2018: Post-breakup burial and exhumation of passive continental margins: Seven propositions to inform geodynamic models. Gondwana Research.</p><p>Japsen et al. 2019: Elevated passive continental margins: Numerical modeling vs observations. A comment on Braun (2018). Gondwana Research.</p>


Sign in / Sign up

Export Citation Format

Share Document