scholarly journals Analysis of creation and combustion process of hydrogen-air mixtures by optical method in isochoric chamber

2017 ◽  
Vol 170 (3) ◽  
pp. 121-125
Author(s):  
Marek BRZEŻAŃSKI ◽  
Tadeusz PAPUGA ◽  
Łukasz RODAK
Keyword(s):  
Combustion Chamber ◽  
Flame Front ◽  
Dose Distribution ◽  
Optical Method ◽  
Direct Injection ◽  
Combustion Process ◽  
Variable Composition ◽  
Mixture Formation ◽  
Before And After

The article considers the analysis of combustion process of hydrogen-air mixture of variable composition. Direct injection of hydrogen into the isochoric combustion chamber was applied and the mixture formation took place during the combustion process. The influence of the dose distribution of the fuel supplied before and after ignition on the formation of the flame front and the course of the pressure in the isochoric combustion chamber was discussed. The filming process and registration of pressure in the isochoric chamber during research of combustion process was applied.

scholarly journals Combustion Thermodynamics of Ethanol, n-Heptane, and n-Butanol in a Rapid Compression Machine with a Dual Direct Injection (DDI) Supply System

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2729
Author(s):  
Ireneusz Pielecha ◽  
Sławomir Wierzbicki ◽  
Maciej Sidorowicz ◽  
Dariusz Pietras
Keyword(s):  
Heat Release ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Direct Injection ◽  
Combustion Process ◽  
Combustion Efficiency ◽  
Injection System ◽  
Rapid Compression Machine ◽  
Process Indicators ◽  
Rapid Compression

The development of internal combustion engines involves various new solutions, one of which is the use of dual-fuel systems. The diversity of technological solutions being developed determines the efficiency of such systems, as well as the possibility of reducing the emission of carbon dioxide and exhaust components into the atmosphere. An innovative double direct injection system was used as a method for forming a mixture in the combustion chamber. The tests were carried out with the use of gasoline, ethanol, n-heptane, and n-butanol during combustion in a model test engine—the rapid compression machine (RCM). The analyzed combustion process indicators included the cylinder pressure, pressure increase rate, heat release rate, and heat release value. Optical tests of the combustion process made it possible to analyze the flame development in the observed area of the combustion chamber. The conducted research and analyses resulted in the observation that it is possible to control the excess air ratio in the direct vicinity of the spark plug just before ignition. Such possibilities occur as a result of the properties of the injected fuels, which include different amounts of air required for their stoichiometric combustion. The studies of the combustion process have shown that the combustible mixtures consisting of gasoline with another fuel are characterized by greater combustion efficiency than the mixtures composed of only a single fuel type, and that the influence of the type of fuel used is significant for the combustion process and its indicator values.

Experimental and Theoretical Optimization of Combustion Chamber and Fuel Distribution for the Low Emission Direct-Injection Diesel Engine

2002 ◽  
Vol 125 (1) ◽  
pp. 351-357 ◽  
Author(s):  
Y. Kidoguchi ◽  
M. Sanda ◽  
K. Miwa
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Direct Injection ◽  
Combustion Process ◽  
Mixture Distribution ◽  
Initial Mixture ◽  
Injection Timing ◽  
Particulate Emissions ◽  
Particulate Emission ◽  
Direct Injection Diesel Engine

Effects of combustion chamber geometry and initial mixture distribution on the combustion process were investigated in a direct-injection diesel engine. In the engine experiment, a high squish combustion chamber with a squish lip could reduce both NOx and particulate emissions with retarded injection timing. According to the results of CFD computation and phenomenological modeling, the high squish combustion chamber with a central pip is effective to keep the combusting mixture under the squish lip until the end of combustion and the combustion region forms rich and highly turbulent atmosphere. This kind of mixture distribution tends to reduce initial burning, resulting in restraint of NOx emission while keeping low particulate emission.

Multidimensional Modeling of Natural Gas Jet and Mixture Formation in DI SI Engines: Development and Validation of a Virtual Injector Model

2009 ◽  
Author(s):  
Mirko Baratta ◽  
Andrea E. Catania ◽  
Francesco C. Pesce
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Combustion Engine ◽  
Direct Injection ◽  
Test Chamber ◽  
Computational Cost ◽  
Computational Domain ◽  
Rarefaction Waves ◽  
Mixture Formation ◽  
Ic Engine

During the last years, the integration of computational CFD tools in the internal combustion (IC) engine design process has continuously been increased, allowing to save time and cost as the need of experimental prototypes has diminished. Numerical analyses of IC engine flows are rather complex from both the conceptual and operational sides. In fact, such flows involve a variety of unsteady phenomena, and the right balance between numerical solution accuracy and computational cost should be always reached. The present paper is focused on computational modeling of natural gas (NG) direct injection (DI) processes from a poppet-valve injector into a bowl-shaped combustion chamber. At high injection pressures, the efflux of gas from the injector and the mixture formation processes include compressible and turbulent flow features, such as rarefaction waves and shock formation, which are difficult to be accurately captured by the numerical simulation, particularly when combustion chamber geometry is complex and piston and intake/exhaust valve grids are moving. A three-dimensional moving grid model of the combustion engine chamber, originally developed by the authors, was enhanced by increasing the accuracy in the sonic section proximity of the critical valve seat nozzle, in order to precisely capture the expansion dynamics the methane undergoes inside the injector and immediately downstream from it. The enhanced numerical model was validated by comparing numerical results to Schlieren experimental images for nitrogen injection into a constant-volume bomb. Then, numerical studies were carried out in order to characterize the fuel jet properties and the evolution of mixture-formation for a centrally-mounted injector configuration in both cases of a pancake test chamber and the real-shaped engine chamber. Finally, the fluid properties computed by the model in the throat-section of the critical nozzle were taken as reference data for developing a new effective ‘virtual injector’ model, which allows the designer to remove the whole computational domain upstream from the sonic section of the nozzle, keeping the flow properties practically unchanged. The outcomes of such a virtual injector model were shown to be in very good agreement with the results of the enhanced complete injector model, confirming the reliability of the proposed novel approach.

Numerical Simulation of Direct Injection Engine With Using Porous Medium

2012 ◽  
Author(s):  
Arash Mohammadi ◽  
Ali Jazayeri ◽  
Masoud Ziabasharhagh
Keyword(s):  
Porous Medium ◽  
Direct Injection ◽  
Combustion Process ◽  
Packed Bed ◽  
Published Data ◽  
Mixture Formation ◽  
Flammability Limits ◽  
Ic Engine ◽  
Engine Simulation ◽  
Wide Range

Porous media (PM) has interesting advantages in compared with free flame combustion due to the higher burning rates, the increased power range, the extension of the lean flammability limits, and the low emissions of pollutants. Future clean internal combustion (IC) engines should have had minimum emissions level (for both gaseous and particulate matter) under possible lowest fuel consumption permitted in a wide range of speed, loads and having good transient response. These parameters strongly depend on mixture formation and combustion processes which are difficult to be controlled in a conventional engine. This may be achieved by realization of homogeneous combustion process in engine. This paper deals with the simulation of direct injection IC engine equipped with a chemically inert PM, with cylindrical geometry to homogenize and stabilize the combustion of engine. A 3D numerical model for PM engine is presented in this study based on a modified version of the KIVA-3V code. Due to lack of any published data for PM engines, numerical results of thermal and combustion wave propagation in a porous medium are compared with experimental data of lean methane-air mixture under filtration in packed bed and very good agreement is seen. For PM engine simulation methane as a fuel is injected directly inside hot PM that is assumed, mounted in cylinder head. Lean mixture is formed and volumetric combustion occurs in PM and in-cylinder. Mixture formation, pressure and temperature distribution in both phases of PM and in-cylinder fluid with the production of pollutants CO and NO and also effects of injection time in the closed part of the cycle are studied.

Shaping the Combustion Chamber of a Piston Engine with Direct Injection of Gasoline

2019 ◽  
pp. 67-76
Author(s):  
R.Z. Kavtaradze ◽  
A.A. Kasko ◽  
A.A. Zelentsov
Keyword(s):  
Combustion Chamber ◽  
Direct Injection ◽  
Combustion Process ◽  
Three Dimensional ◽  
Numerical Control ◽  
Engine Operation ◽  
Model Fuel ◽  
Nonstationary Equations ◽  
Current Lines ◽  
Control Volumes

The object of the study was a six-cylinder in-line engine for land transport system with direct gasoline supply and forced ignition. The problem of shaping the combustion chamber is solved using the numerical control volumes method in a three-dimensional formulation. Nonstationary equations of energy, motion, diffusion and continuity in the Reynolds form, supplemented by the k-ζ-f model of turbulence, are used as a basis for modelling the engine operation. To model fuel combustion, an extended coherent flame model (ECFM) was used. Calculations were performed using the AVL FIRE software. The processes of mixture formation were optimized by considering the current lines and velocity fields of a moving charge, taking into account the geometry of the combustion chamber and intake and exhaust ports. As a result, the efficiency of the engine increased and the combustion process became more stable in the part load modes employing different fuel supply laws.

scholarly journals CFD Analysis of the Fuel–Air Mixture Formation Process in Passive Prechambers for Use in a High-Pressure Direct Injection (HPDI) Two-Stroke Engine

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2846 ◽  
Author(s):  
Marco Ciampolini ◽  
Simone Bigalli ◽  
Francesco Balduzzi ◽  
Alessandro Bianchini ◽  
Luca Romani ◽  
...  
Keyword(s):  
High Pressure ◽  
Direct Injection ◽  
Combustion Process ◽  
Operating Conditions ◽  
Low Temperature Combustion ◽  
Mixture Formation ◽  
Revolution Speed ◽  
Aspect Ratios ◽  
Scavenging Efficiency ◽  
Stroke Engine

The research on two-stroke engines has been focused lately on the development of direct injection systems for reducing the emissions of hydrocarbons by minimizing the fuel short-circuiting. Low temperature combustion (LTC) may be the next step to further improve emissions and fuel consumption; however, LTC requires unconventional ignition systems. Jet ignition, i.e., the use of prechambers to accelerate the combustion process, turned out to be an effective way to perform LTC. The present work aims at proving the feasibility of adopting passive prechambers in a high-pressure, direct injection, two-stroke engine through non-reactive computational fluid dynamics analyses. The goal of the analysis is the evaluation of the prechamber performance in terms of both scavenging efficiency of burnt gases and fuel/air mixture formation inside the prechamber volume itself, in order to guarantee the mixture ignitability. Two prechamber geometries, featuring different aspect ratios and orifice numbers, were investigated. The analyses were replicated for two different locations of the injection and for three operating conditions of the engine in terms of revolution speed and load. Upon examination of the results, the effectiveness of both prechambers was found to be strongly dependent on the injection setup.

Computational and Experimental Analysis of Direct CNG Injection and Mixture Formation in a Spark Ignition Research Engine

2010 ◽  
Author(s):  
Mirko Baratta ◽  
Andrea E. Catania ◽  
Francesco C. Pesce
Keyword(s):  
Numerical Model ◽  
Combustion Chamber ◽  
Cone Angle ◽  
Combustion Process ◽  
Laser Induced Fluorescence ◽  
Operating Conditions ◽  
Design Parameters ◽  
Experimental Investigations ◽  
Injection Timing ◽  
Mixture Formation

Direct injection (DI) of compressed natural gas (CNG) under high pressure conditions is a topic of great interest, owing to its potential for improving SI engine performance and fuel consumption. However, relevant technical difficulties have yet to be resolved in order to stabilize combustion process, especially for stratified engine operating conditions. The present paper is focused on experimental and numerical investigations of the jet formation and fuel-air mixing process in a research optical-access single-cylinder engine. The engine is based on the multi-cylinder engine under development within the European Community (EC) VII Framework Program (FP) InGAS Integrated Project, and features a centrally mounted poppet-valve injector on a pent-roof combustion chamber with a bowl in piston. Experimental investigations were made by means of the planar laser-induced fluorescence technique, and revealed a cycle-to-cycle jet shape variability. In particular, for specific cylinder pressure values at the start of injection, the jet can adhere to chamber walls for a relevant number of cycles, leading to an ‘umbrella-like’ shape. This can change the mixing capabilities of the combustion chamber and cause instabilities in the combustion process. The mentioned behaviour is strongly dependent not only on the injection and cylinder pressures, but also on important design parameters, such as needle cone angle and in-chamber injector protrusion. For this reason, in order to obtain a deep insight into the injected gas behaviour on an average cycle basis, the experimental investigation was supported by a numerical analysis. Simulations were carried out by an optimized variable-density finite-volume numerical model which was built within the Star-CD environment. A previously developed and validated ‘virtual injector’ model was implemented. The outcomes of the numerical model were compared to laser-induced fluorescence images, for both stratified- and homogeneous-charge engine operating conditions and a good agreement was obtained, substantiating the reliability of the applied computational model. Then, the effects of the injector protrusion in the combustion chamber and of injection timing were analyzed, and their impact on jet stability and mixture-formation process was analyzed.

scholarly journals Flame Front and Burned Gas Characteristics for Different Split Injection Ratios and Phasing in an Optical GDI Engine

2019 ◽  
Vol 9 (3) ◽  
pp. 449 ◽  
Author(s):  
Santiago Martinez ◽  
Simona Merola ◽  
Adrian Irimescu
Keyword(s):  
Flame Front ◽  
Soot Formation ◽  
Direct Injection ◽  
Combustion Process ◽  
Pollutant Emissions ◽  
Optical Data ◽  
Cylinder Pressure ◽  
Split Injection ◽  
Gdi Engine ◽  
Injection Strategies

Direct-injection in spark-ignition engines has long been recognized as a valid option for improving fuel economy, reducing CO2 emissions and avoiding knock occurrence due to higher flexibility in control strategies. However, problems associated with mixture formation are responsible for soot emissions, one of the most limiting factors of this technology. Therefore, the combustion process and soot formation were investigated with different injection strategies on a gasoline direct injection (GDI) engine. The experimental analysis was realized on an optically accessible single cylinder engine when applying single, double and triple injection strategies. Moreover, the effect of fuel delivery phasing was also scrutinized by changing the start of the injection during late intake- and early compression-strokes. The duration of injection was split in different percentages between two or three pulses, so as to obtain close to stoichiometric operation in all conditions. The engine was operated at fixed rotational speed and spark timing, with wide-open throttle. Optical diagnostics based on cycle resolved digital imaging was applied during the early and late stages of the combustion process. Detailed information on the flame front morphology and soot formation were obtained. The optical data were correlated to in-cylinder pressure traces and exhaust gas emission measurements. The results suggest that the split injection of the fuel has advantages in terms of reduction of soot formation and NOx emissions and a similar combustion performance with respect to the single injection timing. Moreover, an early injection resulted in higher rates of heat release and in-cylinder pressure, together with a reduction of soot formation and flame distortion. The double injection strategy with higher percentage of fuel injected in the first pulse and early second injection pulse showed the best results in terms of combustion evolution and pollutant emissions. For the operative condition studied, a higher time for mixture homogenization and split of fuel injected in the intake stroke shows the best results.

Sign in / Sign up

Export Citation Format

Share Document