scholarly journals Cost analysis for Construction of Photovoltaic Roofing

TEM Journal ◽  
2020 ◽  
pp. 1508-1513
Author(s):  
Alena Tažiková ◽  
Zuzana Struková ◽  
Juraj Talian ◽  
Anna Ficiková
Keyword(s):  
Solar Energy ◽  
Service Life ◽  
Cost Analysis ◽  
Return On Investment ◽  
Building Structures ◽  
Roof Structure ◽  
State Subsidies ◽  
The Cost ◽  
Family House ◽  
Modern Technologies

The article deals with roof building structures that allow the use of solar energy in the segment of family houses. Modern technologies include photovoltaic roofing, which, in addition to the production of electricity, also fully replaces the roofing itself. It does not disturb the resulting aesthetic and architectural impression of the roof. The article analyzes the cost, return on investment and service life of four solar solutions that are applied to the roof structure of a family house. The use of solar energy is currently small in the segment of family houses in Slovakia despite state subsidies. As this is an ecological way of obtaining energy, there is a need for more discussion on this topic in order to ensure the sustainability of the planet.

scholarly journals Design of joints of thin sheet parts with mechanical connections (according to EN 1993-1-3)

2021 ◽  
pp. 19-27
Author(s):  
Mirosław BRONIEWICZ ◽  
Sandra MLONEK ◽  
Romuald SZELĄG
Keyword(s):  
Construction Industry ◽  
Thin Sheet ◽  
Modern Technology ◽  
Design Stage ◽  
Building Structures ◽  
Structural Elements ◽  
Correct Application ◽  
The Cost ◽  
Conventional Systems ◽  
Modern Technologies

The main direction of development of steel building structures is to reduce the cost of implementation of buildings without changing their load-bearing capacity and value in use. Therefore, an essential factor in the development is the introduction of modern technologies. Solutions from other industries such as automotive or aerospace, have been adapted to perform building structures. As a result, today in the construction industry we use lightweight steel profiles from cold-bent elements. Modern technology and advanced calculation theory make it possible to build these structures much more economically than previous conventional systems. Elements and products made of thin sheets allow to reduce costs of construction, but at the same time is associated with the possibility of defects resulting in the appearance of a state of failure of structural elements or the entire facility. Connection zones of thin-walled elements are always the critical points, hence the need for a particularly thorough assessment at the design stage, and then at the implementation of the investment. Correct application of the presented calculation procedure in article will allow the design and realization of modern structures, which will be durable and safe in operation for the expected period of time.

scholarly journals Investigation of Potential of Solar Photovoltaic System as an Alternative Electric Supply on the Tropical Island of Mantanani Sabah Malaysia

2021 ◽  
Vol 13 (22) ◽  
pp. 12432
Author(s):  
Ag Sufiyan Abd Hamid ◽  
Mohamad Zul Hilmey Makmud ◽  
Abu Bakar Abd Rahman ◽  
Zuhair Jamain ◽  
Adnan Ibrahim
Keyword(s):  
Solar Energy ◽  
Economic Analysis ◽  
Return On Investment ◽  
Cost Of Capital ◽  
Payback Period ◽  
Photovoltaic System ◽  
Electricity Supply ◽  
Daily Routine ◽  
Electrical Load ◽  
The Cost

This article reports on the potential use of a photovoltaic solar system on Mantanani Island. This island has its attractions in terms of flora and fauna as well as the uniqueness of its local community. The electricity supply status of the island is minimal, and the local electricity provider only provides two units of electrical generator that only supply energy from 18:00 to 06:00. This study is motivated by the hypothesis that if the target resident can obtain a better electricity supply, they can generate higher income and improve their standard of living. This study aims to identify the status of solar energy sources, estimate the basic electrical load, and conduct a techno-economic analysis of homestay enterprises of residents. Geostationary satellite data on solar energy resources were gathered and analyzed using Solargis. The electricity load was calculated based on the daily routine activities of the residents and usage of primary electrical appliances. Techno-economic analysis was done by determining the key parameters to calculate the return on investment and payback period. The results showed that Mantanani Island had great potential for implementing a photovoltaic system, by the estimated value of the total annual solar energy and peak sun hour of 1.447 MWh/m2/y and 4.05 h, respectively. The variation in total monthly solar energy was minimal, with a range of only 61.3 Wh/m2. The calculated electrical load was 7.454 kWh/d. The technoeconomic assessment showed that the return on investment was MYR 3600 per year. However, the value of the payback period varies according to the value of the cost of capital spent. Regarding the cost of capital of this study, the shortest and longest payback periods achievable were 2.78 and 13.89 years, respectively. This calculation is in line with a photovoltaic system with a capacity of 2.2 kWp.

Identyfikacja kosztów pogorszenia reputacji przedsiębiorstwa z perspektywy interesariuszy

2014 ◽  
pp. 10-15
Author(s):  
Danuta Szwajca ◽  
Alina Rydzewska ◽  
Tomasz Nawrocki
Keyword(s):  
Cost Analysis ◽  
Economic Costs ◽  
Crisis Situation ◽  
Modern Economy ◽  
The Cost ◽  
A Company ◽  
Crisis Situations

In the realities of modern economy even the best-managed company is not able to avoid threats and bad decisions, that can cause a crisis. Each crisis situation, that a company experiences, generates not only measurable economic costs, but also more difficult to assess and measure costs of a deteriorated reputation. These costs are the result of infringement of interests or failing to satisfy different stakeholders expectations. The aim of this article is an attempt to identify the cost of reputation deterioration in the context of the various interests of stakeholders groups. In the first part, the paper presents the effects of good and bad reputation, the reputation "contamination" path in a crisis situation and a cost analysis caused by it. The second part is empirical, where the identification of crisis situations measurable costs and reputation deterioration based on the examples of three selected companies was performed.

Return on Invesment (ROI) of Software Product: A Systematic Literature Review

2015 ◽  
Vol 6 (1) ◽  
pp. 50-57
Author(s):  
Rizqa Raaiqa Bintana ◽  
Putri Aisyiyah Rakhma Devi ◽  
Umi Laili Yuhana
Keyword(s):  
Return On Investment ◽  
Assessment Criteria ◽  
Software Product ◽  
And Performance ◽  
Rational Consideration ◽  
Actual Return ◽  
The Cost ◽  
Investment Models ◽  
The Impact

The quality of the software can be measured by its return on investment. Factors which may affect the return on investment (ROI) is the tangible factors (such as the cost) dan intangible factors (such as the impact of software to the users or stakeholder). The factor of the software itself are assessed through reviewing, testing, process audit, and performance of software. This paper discusses the consideration of return on investment (ROI) assessment criteria derived from the software and its users. These criteria indicate that the approach may support a rational consideration of all relevant criteria when evaluating software, and shows examples of actual return on investment models. Conducted an analysis of the assessment criteria that affect the return on investment if these criteria have a disproportionate effort that resulted in a return on investment of a software decreased. Index Terms - Assessment criteria, Quality assurance, Return on Investment, Software product

Modernization of Water Treatment System at Agricultural Enterprises Due to Introduction of Solar Energy

2020 ◽  
Vol 67 (1) ◽  
pp. 142-147
Author(s):  
Alina A. Aleksandrova ◽  
Maksim S. Zhuzhin ◽  
Yuliya M. Dulepova
Keyword(s):  
Mathematical Model ◽  
Water Treatment ◽  
Solar Energy ◽  
Energy Saving ◽  
Electric Energy ◽  
Solar Water Heater ◽  
Water Heater ◽  
Agricultural Enterprises ◽  
Solar Water ◽  
The Cost

Energy saving today is an integral part of the development strategy of agricultural organizations. Considerable attention is paid to the modernization and automation of technological processes in agricultural enterprises, which can improve the quality of work and reduce the cost of production. The direction of modernization is to reduce the consumption of electric energy by improving the water treatment system in livestock complexes. (Research purpose) The research purpose is to determine the potential of solar energy used in the Nizhny Novgorod region and to determine the possibility of its use for water heating in livestock complexes and to consider the cost-effectiveness of using a device to heat water through solar energy. (Materials and methods) Authors used an improved algorithm of Pixer and Laszlo, applied in the NASA project «Surface meteorology and Energy», which allows to calculate the optimal angle of inclination of the device for heating water. (Results and discussion) Designed a mock-up of a livestock complex with a solar water heater installed on the roof, protected by patent for invention No. 2672656. A mathematical model was designed experimentally to predict the results of the plant operation in non-described modes. (Conclusions) The article reveales the optimal capacity of the circulation pump. Authors have created a mathematical model of the device that allows to predict the water heating in a certain period of time. The article presents the calculations on the energy and economic efficiency of using a solar water heater. An electric energy saving of about 30 percent, in the economic equivalent of 35 percent.

Design of Electrolytic Strengthening Machine for Cutting Edge of Cutter

2016 ◽  
Vol 693 ◽  
pp. 1585-1590
Author(s):  
Yi Zhuo Guo ◽  
Xian Guo Yan ◽  
Shu Juan Li ◽  
Hong Guo
Keyword(s):  
Service Life ◽  
Calculation Method ◽  
High Speed ◽  
High Speed Steel ◽  
Cutting Edge ◽  
The Cost ◽  
Electric Quantity

Many studies have proved the service life of cutter can be prolonged by electrolytic strengthening. Based on the theory of electrolytic strengthening technology, this paper introduced and developed prototype equipment for strengthening cutting edge of rotary cutter and put forward a calculation method of total electric quantity consumption during the electrolysis suitable for microcontroller. The M8 high-speed steel tap is taken as a strengthening example. After finished the strengthening process that it clearly see the results of the surface of tap was obviously polished by observing the micrograph. This equipment improves the reliability of electrolytic strengthening and the cost is relatively cheap.

Economic impact of the use of the National Surgical Quality Improvement Program

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
Alvine Fansi ◽  
Angela Ly ◽  
Julie Mayrand ◽  
Maggy Wassef ◽  
Aldanie Rho ◽  
...  
Keyword(s):  
Quality Improvement ◽  
Cost Analysis ◽  
Economic Impact ◽  
Quality Improvement Program ◽  
Economic Evaluations ◽  
Complication Rates ◽  
Improvement Program ◽  
Surgical Quality ◽  
Acs Nsqip ◽  
The Cost

Objectives The American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP®) is a validated, risk-adjusted database for improving the quality and security of surgical care. ACS NSQIP can help participating hospitals target areas that need improvement. The aim of this study was to systematically review the literature analyzing the economic impact of using NSQIP. This paper also provides an estimation of annual cost savings following the implementation of NSQIP and quality improvement (QI) activities in two hospitals in Quebec. Methods In June 2018, we searched in seven databases, including PubMed, Embase, and NHSEED for economic evaluations based on NSQIP data. Contextual NSQIP databases from two hospitals were collected and analyzed. A cost analysis was conducted from the hospital care perspective, comparing complication costs before and after 1 year of the implementation of NSQIP and QI activities. The number and the cost of complications are measured. Costs are presented in 2018 Canadian dollars. Results Out of 1,612 studies, 11 were selected. The level of overall evidence was judged to be of moderate to high quality. In general, data showed that, following the implementation of NSQIP and QI activities, a significant decrease in complications and associated costs was observed, which improved with time. In the cost analysis of contextual data, the reduction in complication costs outweighed the cost of implementing NSQIP. However, this cost analysis did not take into account the costs of QI activities. Conclusions NSQIP improves complication rates and associated costs when QI activities are implemented.

scholarly journals The Analysis of Small Investors’ Demands on a Thermal Insulation System for a Family House: A Case Study

2021 ◽  
Vol 13 (5) ◽  
pp. 2491
Author(s):  
Alena Tažiková ◽  
Zuzana Struková ◽  
Mária Kozlovská
Keyword(s):  
Decision Making ◽  
Thermal Insulation ◽  
Construction Cost ◽  
Environmental Cost ◽  
Multi Criteria Decision Making ◽  
Insulation System ◽  
Insulation Systems ◽  
Small Investors ◽  
The Cost ◽  
Family House

This study deals with small investors’ demands on thermal insulation systems when choosing the most suitable solution for a family house. By 2050, seventy percent of current buildings, including residential buildings, are still expected to be in operation. To reach carbon neutrality, it is necessary to reduce operational energy consumption and thus reduce the related cost of building operations and the cost of the life cycle of buildings. One solution is to adapt envelopes of buildings by proper insulation solutions. To choose an optimal thermal insulation system that will reduce energy consumption of building, it is necessary to consider the environmental cost of insulation materials in addition to the construction cost of the materials. The environmental cost of a material depends on the carbon footprint from the initial origin of the material. This study presents the results of a multi-criteria decision-making analysis, where five different contractors set the evaluation criteria for selection of the optimal thermal insulation system. In their decision-making, they involved the requirements of small investors. The most common requirements were selected: the construction cost, the construction time (represented by the total man-hours), the thermal conductivity coefficient, the diffusion resistance factor, and the reaction to fire. The confidences of the criteria were then determined with the help of the pairwise comparison method. This was followed by multi-criteria decision-making using the method of index coefficients, also known as the method of basic variant. The multi-criteria decision-making included thermal insulation systems based on polystyrene, mineral wool, thermal insulation plaster, and aerogels’ nanotechnology. As a result, it was concluded that, currently, in Slovakia, small investors emphasize the cost of material and the coefficient of thermal conductivity and they do not care as much about the carbon footprint of the material manufacturing, the importance of which is mentioned in this study.

scholarly journals Performance of Hybrid Single Well Enhanced Geothermal System and Solar Energy for Buildings Heating

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2473
Author(s):  
Yujiang He ◽  
Xianbiao Bu
Keyword(s):  
Solar Energy ◽  
Service Life ◽  
Heating System ◽  
Hydrothermal Systems ◽  
Geothermal System ◽  
Heat Output ◽  
Enhanced Geothermal System ◽  
Geothermal Heat ◽  
Hybrid Heating ◽  
Single Well

The energy reserves in hot dry rock and hydrothermal systems are abundant in China, however, the developed resources are far below the potential estimates due to immature technology of enhanced geothermal system (EGS) and scattered resources of hydrothermal systems. To circumvent these problems and reduce the thermal resistance of rocks, here a shallow depth enhanced geothermal system (SDEGS) is proposed, which can be implemented by fracturing the hydrothermal system. We find that, the service life for SDEGS is 14 years with heat output of 4521.1 kW. To extend service life, the hybrid SDEGS and solar energy heating system is proposed with 10,000 m2 solar collectors installed to store heat into geothermal reservoir. The service life of the hybrid heating system is 35 years with geothermal heat output of 4653.78 kW. The novelty of the present work is that the hybrid heating system can solve the unstable and discontinuous problems of solar energy without building additional back-up sources or seasonal storage equipment, and the geothermal thermal output can be adjusted easily to meet the demand of building thermal loads varying with outside temperature.

scholarly journals A cost analysis to address issues of budget constraints on the implementation of the indoor residual spray programme in two districts of Maputo Province, Mozambique

2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Neide Canana
Keyword(s):  
Sensitivity Analysis ◽  
Cost Analysis ◽  
Financial Analysis ◽  
Indoor Residual Spraying ◽  
Economic Cost ◽  
Cost Information ◽  
Financial Cost ◽  
Provider Perspective ◽  
The Government ◽  
The Cost

Abstract Background It is frequently said that funding is essential to ensure optimal results from a malaria intervention control. However, in recent years, the capacity of the government of Mozambique to sustain the operational cost of indoor residual spraying (IRS) is facing numerous challenges due to restrictions of the Official Development Assistance. The purpose of the study was to estimate the cost of IRS operationalization in two districts of Maputo Province (Matutuíne and Namaacha) in Mozambique. The evidence produced in this study intends to provide decision-makers with insight into where they need to pay close attention in future planning in order to operationalize IRS with the existent budget in the actual context of budget restrictions. Methods Cost information was collected retrospectively from the provider perspective, and both economic and financial costs were calculated. A “one-way” deterministic sensitivity analysis was performed. Results The average economic costs totaled US$117,351.34, with an average economic cost per household sprayed of US$16.35, and an average economic cost per person protected of US$4.09. The average financial cost totaled US$69,174.83, with an average financial cost per household sprayed and per person protected of US$9.84 and US$2.46, respectively. Vehicle, salary, and insecticide costs were the greatest contributors to overall cost in the economic and financial analysis, corresponding to 52%, 17%, and 13% in the economic analysis and 21%, 27%, and 22% in the financial analysis, respectively. The sensitivity analysis was adapted to a range of ± (above and under) 25% change. There was an approximate change of 14% in the average economic cost when vehicle costs were decreased by 25%. In the financial analysis, the average financial cost was lowered by 7% when salary costs were decreased by 25%. Conclusions Altogether, the current cost analysis provides an impetus for the consideration of targeted IRS operationalization within the available governmental budget, by using locally-available human resources as spray operators to decrease costs and having IRS rounds be correctly timed to coincide with the build-up of vector populations.

Sign in / Sign up

Export Citation Format

Share Document