scholarly journals Highly Porous Carbon Materials Filled with Nickel Hydroxide Nanoparticles; Synthesis, Study, Application in Electrochemistry

2015 ◽  
Vol 17 (3) ◽  
pp. 187 ◽  
Author(s):  
Yu.A. Zakharov ◽  
A.N. Voropay ◽  
N.M. Fedorova ◽  
V.M. Pugachev ◽  
A.V. Puzynin ◽  
...  
Keyword(s):  
Porous Carbon ◽  
Nickel Hydroxide ◽  
Nitrogen Adsorption ◽  
Porous Carbon Material ◽  
X Ray Diffraction ◽  
Scanning Rate ◽  
Electrode Cell ◽  
Adsorption Desorption ◽  
Electrode Characteristics ◽  
Study Application

<p>Nickel hydroxide was deposited on the surface of the porous carbon to obtain a cathode material for supercapacitors. This work is the first part of the study of Ni(OH)<sub>2</sub>/С composite, which considers the conditions of its synthesis using two types of porous carbon matrices with a highly developed specific surface area (1000–3000 m<sup>2</sup>/g) and two types of precursors (NiCl<sub>2</sub>*6H<sub>2</sub>O and Ni(N<sub>3</sub>)<sub>2</sub>). The morphology of the systems, in particular the shape and size characteristics of the hydroxide filler particles, was examined using the scanning electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption at 77 K. The measurements of capacity of the Ni(OH)<sub>2</sub>/С-electrodes were made in 6 M KOH using an asymmetric two-electrode cell (a porous carbon material with known electrode characteristics was employed as the counter electrode). The capacity was shown to decrease by 22–56% with increasing the scanning rate from 10 to 80 mV/s. A maximum capacity of the composite was obtained at a scanning rate of 10 mV/s was 346 F/g.</p>

Preparation of Porous Carbon and its Composite Materials via the Reaction under Autogenic Pressure at Elevated Temperature (RAPET)

2018 ◽  
Vol 921 ◽  
pp. 60-64
Author(s):  
Ke Xun Li ◽  
Jiang Jiang Ma ◽  
Jie Zhang ◽  
Kun Jia ◽  
Bi Cheng Zhou ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Composite Materials ◽  
Porous Carbon ◽  
Nitrogen Adsorption ◽  
Inorganic Materials ◽  
Bet Surface Area ◽  
Tetrabutyl Titanate ◽  
X Ray Diffraction ◽  
Discharge Performance ◽  
Adsorption Desorption

In this paper, we reported on the preparation of porous materials via a reaction under Autogenic Pressure at Elevated Temperature (RAPET) at 700°Cusing natural product and alkoxides as precursors. The RAPET is a new simple efficient method to prepare inorganic materials. The porous carbon and its composite materials were prepared via the method of RAPET using natural products such as sweet potato, coriander, the absorbent cotton and viscose fiber doped by tetrabutyl titanate (TBOT) and tetraethoxysilane (TEOS). The reaction temperature of RAPET was 700°C. The carbon and its composites were studied with scanning electron microscopy (SEM), X-ray diffraction (XRD) and nitrogen adsorption-desorption measurements. The BET surface area of the materials are different from 4m2/g to 405m2/g. The XRD investigation indicates that the phases of the TiO2 in the carbon/TiO2 composites are anatase. The materials show a certain charge-discharge performance.

Application of raw and modified Uruguayan clays to phosphate adsorption for water remediation

MRS Advances ◽  
2018 ◽  
Vol 3 (61) ◽  
pp. 3543-3549
Author(s):  
Pablo González ◽  
Andrea C. De Los Santos ◽  
Jorge R. Castiglioni ◽  
María A. De León
Keyword(s):  
Nitrogen Adsorption ◽  
Pillared Clay ◽  
Water Remediation ◽  
Phosphate Adsorption ◽  
X Ray Diffraction ◽  
Order Model ◽  
Freundlich Model ◽  
X Ray ◽  
First Order ◽  
Adsorption Desorption

ABSTRACTA raw clay from Uruguay was modified with aluminium to obtain an aluminium pillared clay (Al-PILC). The solids were characterized by scanning electron microscopy, X-ray diffraction and nitrogen adsorption-desorption isotherms. The Al-PILC retained the typical laminar structure of montmorillonite. The specific surface area and the microporous volume of the Al-PILC, 235 m2 g-1 and 0.096 cm3 g-1, respectively, were much higher than those of the clay. The phosphate adsorption capacity of the Al-PILC was higher than those of the clay. The phosphate adsorption kinetic followed the pseudo-first-order model for both, the clay and the Al-PILC, and the phosphate adsorption isotherm for the Al-PILC fit the Freundlich model.

Structural and surface aspects of thermally treated copper aluminium mixed hydroxides

1991 ◽  
Vol 69 (10) ◽  
pp. 1511-1515 ◽  
Author(s):  
Awad I. Ahmed ◽  
S. E. Samra ◽  
S. A. El-Hakam
Keyword(s):  
Pore Structure ◽  
Copper Content ◽  
Textural Properties ◽  
Nitrogen Adsorption ◽  
Phase Changes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Areas ◽  
Structure Surface ◽  
Adsorption Desorption

CuO–Al2O3 catalysts containing various amounts of copper oxide have been prepared by precipitation. The phase changes were studied by X-ray diffraction. The results obtained revealed that the thermal treatment of solid CuO–Al2O3 at 700 °C produced only crystalline CuO. Heating to 900 °C led to the formation of copper alumina spinel together with unreacted CuO and γ-Al2O3. The spinel content was found to increase with increasing copper content. Nitrogen adsorption–desorption isotherms on the calcined samples have been measured. Surface areas have been calculated and the pore structure analysed. The textural properties of the system were found to depend on both the copper content and the calcination temperature. Key words: CuO, Al2O3 catalysts, structure, surface area, pore structure.

scholarly journals Bulk Versus Surface Modification of Alumina with Mn and Ce Based Oxides for CH4 Catalytic Combustion

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1771 ◽  
Author(s):  
Stefan Neatu ◽  
Mihaela M. Trandafir ◽  
Adelina Stănoiu ◽  
Ovidiu G. Florea ◽  
Cristian E. Simion ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Combustion ◽  
Mixed Oxides ◽  
Sol Gel ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Programmed ◽  
Catalytic Combustion Of Methane ◽  
Adsorption Desorption

This study presents the synthesis and characterization of lanthanum-modified alumina supported cerium–manganese mixed oxides, which were prepared by three different methods (coprecipitation, impregnation and citrate-based sol-gel method) followed by calcination at 500 °C. The physicochemical properties of the synthesized materials were investigated by various characterization techniques, namely: nitrogen adsorption-desorption isotherms, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and H2–temperature programmed reduction (TPR). This experimental study demonstrated that the role of the catalytic surface is much more important than the bulk one. Indeed, the incipient impregnation of CeO2–MnOx catalyst, supported on an optimized amount of 4 wt.% La2O3–Al2O3, provided the best results of the catalytic combustion of methane on our catalytic micro-convertors. This is mainly due to: (i) the highest pore size dimensions according to the Brunauer-Emmett-Teller (BET) investigations, (ii) the highest amount of Mn4+ or/and Ce4+ on the surface as revealed by XPS, (iii) the presence of a mixed phase (Ce2MnO6) as shown by X-ray diffraction; and (iv) a higher reducibility of Mn4+ or/and Ce4+ species as displayed by H2–TPR and therefore more reactive oxygen species.

scholarly journals Effect of the Organobentonite Filler on Structure and Properties of Composites Based on Hydroxyethyl Cellulose

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Olga V. Alekseeva ◽  
Anna N. Rodionova ◽  
Nadezhda A. Bagrovskaya ◽  
Alexander V. Agafonov ◽  
Andrew V. Noskov
Keyword(s):  
Tensile Properties ◽  
Composite Films ◽  
Nitrogen Adsorption ◽  
Hydroxyethyl Cellulose ◽  
X Ray Diffraction ◽  
Ir Spectrometry ◽  
X Ray ◽  
Mechanical Dispersion ◽  
Filling Agent ◽  
Adsorption Desorption

Organobentonite powder was synthesized and characterized using laser diffraction, X-ray diffraction, low-temperature nitrogen adsorption-desorption technique, and dynamic light scattering. Obtained powder was found as material with mesopores. The organobentonite particles were larger than pure bentonite one. Hydroxyethyl cellulose (HEC) was filled with organobentonite particles by mechanical dispersion, and produced composite films were researched by the number of methods. New data relating to structure, tensile properties, and antimicrobial activity of HEC/organobentonite composites were obtained. Using results of X-ray diffraction, the reflections assigned to crystal filler in polymer material were proved. Concentration effect of the filling agent on tensile properties of composite film was revealed. Data of infrared (IR) spectrometry indicated a decrease in the density of hydrogen-bond net in HEC/organobentonite composite as compared with pristine HEC. Using microbiological tests, it was found that the HEC/organobentonite films exhibited bacteriostatic action against S. aureus and fungistatic action against molds.

Synthesis of SBA-15 under Normal Pressure by Microwave Irradiation Method for Adsorption of Pb(II) in Environment

2010 ◽  
Vol 113-116 ◽  
pp. 775-779 ◽  
Author(s):  
Yan Liu ◽  
Yun Wang ◽  
Xiao Jie Zhang ◽  
Ji Min Xie ◽  
Yong Sheng Yan
Keyword(s):  
Microwave Irradiation ◽  
River Sediments ◽  
Textural Properties ◽  
Nitrogen Adsorption ◽  
Normal Pressure ◽  
X Ray Diffraction ◽  
Microwave Irradiation Method ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Desorption

Mesoporous silica SBA-15 has been prepared rapidly under normal pressure by microwave irradiation method. The textural properties were studied by low-angle X-ray diffraction (XRD) and nitrogen adsorption-desorption. The optimum adsorption conditions of Pb(Ⅱ) on SBA-15 was investigated. The results show that the adsorption kinetics follows a pseudo-second-order rate model and the experimental equilibrium data is fitted well by Langmuir adsorption isotherm. The adsorption capacity reaches 50.10 mg•g-1 which is much higher than that of hydrothermal synthesized samples. This adsorbent has been applied in the determination of Pb(Ⅱ) in river sediments samples.

scholarly journals Photocatalytic and adsorption properties of TiO2-pillared montmorillonite obtained by hydrothermally activated intercalation of titanium polyhydroxo complexes

2018 ◽  
Vol 9 ◽  
pp. 364-378 ◽  
Author(s):  
Mikhail F Butman ◽  
Nikolay L Ovchinnikov ◽  
Nikita S Karasev ◽  
Nataliya E Kochkina ◽  
Alexander V Agafonov ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Nitrogen Adsorption ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
New Approach ◽  
Pillared Montmorillonite ◽  
Degussa P25 ◽  
Adsorption Desorption ◽  
High Degree

We report on a new approach for the synthesis of TiO2-pillared montmorillonite, where the pillars exhibit a high degree of crystallinity (nanocrystals) representing a mixture of anatase and rutile phases. The structures exhibit improved adsorption and photocatalytic activity as a result of hydrothermally activated intercalation of titanium polyhydroxo complexes (i.e., TiCl4 hydrolysis products) in a solution with a concentration close to the sol formation limit. The materials, produced at various annealing temperatures from the intercalated samples, were characterized by infrared spectroscopy, differential scanning calorimetry (DSC)/thermogravimetric analysis (TGA), X-ray diffraction, dynamic light scattering (DLS) measurements, and liquefied nitrogen adsorption/desorption. The photocatalytic activity of the TiO2-pillared materials was studied using the degradation of anionic (methyl orange, MO) and cationic (rhodamine B, RhB) dyes in water under UV irradiation. The combined effect of adsorption and photocatalysis resulted in removal of 100% MO and 97.5% RhB (with an initial concentration of 40 mg/L and a photocatalyst-sorbent concentration of 1 g/L) in about 100 minutes. The produced TiO2-pillared montmorillonite showed increased photocatalytic activity as compared to the commercially available photocatalyst Degussa P25.

Self-Organization in Nanoparticle Titanium Dioxide Thin Films

1998 ◽  
Vol 519 ◽  
Author(s):  
S.D. Burnside ◽  
V. Shklover ◽  
C.A. Barbe ◽  
K. Brooks ◽  
P. Comte ◽  
...  
Keyword(s):  
Thin Films ◽  
Titanium Dioxide ◽  
Sol Gel ◽  
Photovoltaic Performance ◽  
Nitrogen Adsorption ◽  
Self Organization ◽  
X Ray Diffraction ◽  
Nanocrystalline Titanium ◽  
Titanium Dioxide Thin Films ◽  
Adsorption Desorption

AbstractNanocrystalline titanium dioxide has been synthesized using a sol-gel technique followed by hydrothermal growth at temperatures in the range 190-270°C. Thin films of these colloids were studied using x-ray diffraction (XRD), scanning electron microscopy (SEM), and nitrogen adsorption/desorption. Self-organization of the nanocrystalline particles in regular arrays was observed in films made from colloids autoclaved at lower temperatures. We present herein initial photovoltaic performance of these semiconducting films used as working electrodes in a dye-sensitized solar cell.

Positron Annihilation Study of Porous ZnO Synthesized with Soft Template

2017 ◽  
Vol 373 ◽  
pp. 299-302
Author(s):  
Bo Zhou ◽  
Chong Yang Li ◽  
Ning Qi ◽  
Zhi Quan Chen
Keyword(s):  
Pore Size ◽  
Positron Lifetime ◽  
Nitrogen Adsorption ◽  
Soft Template ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Long Lifetime ◽  
Positron Annihilation Study ◽  
Adsorption Desorption

Porous ZnO were synthesized with soft template method using zinc acetate Zn (CH3COO)2·2H2O as precursor and block copolymer F127 as the surfactant. Nitrogen adsorption-desorption measurements indicate that the ZnO sample contains large pores with mean diameter of about 30 nm. However, both small-angle X-ray diffraction and transmission electron microscope measurements indicate that the pore ordering is missing. Positron lifetime measurements reveal two long lifetime components in the porous ZnO. The longest lifetime τ4 (75 ns) corresponds to ortho-positronium (o-Ps) annihilation in large pores. The pore size estimated from τ4 is about 10.6 nm. This is much smaller than that estimated from Nitrogen adsorption-desorption measurements. In addition, the intensity I4 is only about 2.2%. This is probably due to the chemical quenching and/or inhibition of positronium formation induced by ZnO, which reduces o-Ps lifetime and intensity, and leads to under estimation of the pore size.

Catalytic Activity of Argentum-loaded MCM-41 for Ozonation of p- Chlorobenzoic Acid (p-CBA) in Aqueous Solution

2015 ◽  
Vol 18 (1) ◽  
Author(s):  
Zhaoqi Pan ◽  
Junyu Zeng ◽  
Bingyan Lan ◽  
Laisheng Li
Keyword(s):  
Aqueous Solution ◽  
Nitrogen Adsorption ◽  
Hexagonal Structure ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
Chlorobenzoic Acid ◽  
Transmission Electron ◽  
Initial Ph ◽  
Adsorption Desorption ◽  
Mcm 41

AbstractArgentum-loaded MCM-41 (Ag/MCM-41) was synthesized successfully by a hydrothermal method and used as a catalyst for the ozonation of p-chlorobenzoic acid (p-CBA) in aqueous solution. Ag/MCM-41 was characterized by low angle X-ray diffraction (XRD), nitrogen adsorption-desorption and transmission electron microscopy (TEM). Characterizations suggest that the prepared samples retained a highly regulated mesopores of hexagonal structure and a high BET surface area. The influences of argentum content, initial pH, reaction temperature on the catalytic ozonation were also evaluated. Ag/MCM-41/O

Sign in / Sign up

Export Citation Format

Share Document