Innovative Fluid Mechanics Experiments For Modern Mechanical Engineering Program

2020 ◽  
Author(s):  
Afshin Goharzadeh ◽  
Peter Rodgers ◽  
Christian Mandel
Keyword(s):  
Fluid Mechanics ◽  
Mechanical Engineering ◽  
Engineering Program

Thermo/Fluids Curriculum Development in a New Mechanical Engineering Program

2010 ◽  
Author(s):  
Amir Jokar ◽  
Stephen Solovitz
Keyword(s):  
Heat Transfer ◽  
Graduate Students ◽  
Fluid Mechanics ◽  
Mechanical Engineering ◽  
Dual Approach ◽  
Engineering Programs ◽  
Engineering Research ◽  
Engineering Program ◽  
Research Activities ◽  
Hands On

This study describes a model for developing a thermo/fluids curriculum in a new mechanical engineering program. Hands-on experience and applied engineering research are the center of this development. The efforts in creating undergraduate, elective, and graduate level courses and laboratories in the fundamental topics of thermodynamics, fluid mechanics, and heat transfer are reviewed and explained in detail. A dual approach has been taken in developing the curriculum, so that both undergraduate and graduate students can utilize the facility in their research activities. This development has been revised and optimized since its initiation in 2005, and it has successfully been accredited by ABET. The good results obtained from this model can be used in developing mechanical engineering programs, especially for smaller-sized institutions.

Perlaksanaan Kaedah Pembelajaran Berasaskan Projek dalam Pengajaran dan Pembelajaran Kaedah Fiqh

2018 ◽  
Vol 2 (2) ◽  
pp. 14-23
Author(s):  
Mohd Aderi Che Noh ◽  
Normurni Mohamad ◽  
Adibah Hasanah Abd Halim ◽  
Absha Atiah Abu Bakar
Keyword(s):  
Data Collection ◽  
Mechanical Engineering ◽  
Project Based Learning ◽  
Narrative Form ◽  
Learning Methods ◽  
Engineering Program ◽  
Science Technology ◽  
Interview Methods

This study aims to see the implementation of project based learning methods (PBL) implemented by lecturers in the Science, Technology and Engineering P&P processes in Islam as an effort to enhance students' understanding in the Fiqh Method. Respondents in this study were students of second semester, Diploma of Mechanical Engineering program, Department of Mechanical Engineering, Politeknik Banting. Observation and interview methods are used for data collection purposes. The data were analyzed descriptively and presented in narrative form. The findings show that PBL activity is a fun and enjoyable P&P activity for students. Abstrak Kajian  ini  bertujuan  untuk  melihat  perlaksanaan  kaedah  pembelajaran  berasaskan  projek  (PBL)  yang dilaksanakan  oleh  pensyarah  dalam  proses  P&P Sains,  Teknologi  dan  kejuruteraan  dalam  Islam  sebagai usaha  meningkatkan  kefahaman  pelajar  pelajar  dalam  tajuk  Kaedah Fiqh.  Responden  dalam  kajian  ini adalah   terdiri   daripada   pelajar   semester   dua   progran   Diploma   Kejuruteraan   Mekanikal,   Jabatan Kejuruteraan  Mekanikal,  Politeknik  Banting.  Kaedah  pemerhatian  dan  temu  bual  digunakan  bagi  tujuan pengutipan data. Data dianalisis secara deskriptif dan dipersembahkan dalam bentuk naratif. Dapatan kajian menunjukkan aktiviti PBL merupakan aktiviti P&P yang disukai dan menyeronokkan bagi para pelajar.

scholarly journals AN EXAMPLE OF ABET ACCREDITATION PRACTICE OF MECHANICAL ENGINEERING PROGRAM AT UAE UNIVERSITY

2019 ◽  
Vol 7 (8) ◽  
pp. 387-401
Author(s):  
Emad Elnajjar ◽  
S.-A.B. Al Omari ◽  
Farag Omar ◽  
Mohamed YE. Selim ◽  
AHI Mourad
Keyword(s):  
Learning Outcomes ◽  
United Arab Emirates ◽  
Mechanical Engineering ◽  
Student Learning Outcomes ◽  
Assessment Tools ◽  
Indirect Assessment ◽  
Engineering Program ◽  
Engineering And Technology ◽  
United Arab Emirates University

This paper focuses on the Mechanical Engineering Program (MEP) at United Arab Emirates University (UAEU) as a case study in terms of consistent accreditation by the internationally recognized Accreditation Board for Engineering and Technology, Inc. (ABET), where significant proportions of the study give attention towards the recent records of accreditation; granted in 2016. The paper describes the program educational objectives (PEOs), the student learning outcomes (SOs), and the curriculum, direct and indirect assessment tools of the SOs and it’s mapping to the PEO, and the level of attainment achieved is addressed through a case study example.

scholarly journals Providing a Uniform Design Experience in an Undergraduate Mechanical Engineering Program

2021 ◽  
Author(s):  
Filippo A. Salustri ◽  
W. Patrick Neumann
Keyword(s):  
Design Process ◽  
Mechanical Engineering ◽  
Uniform Design ◽  
Design Engineering ◽  
Specific Design ◽  
Design Work ◽  
Design Project ◽  
Engineering Program ◽  
Design Projects ◽  
Design Experience

The design experience of 3rd year undergraduates in Mechanical Engineering at Ryerson University, and the assessment of student design work, was found to be disjointed and highly variable across the program. To attempt to address this, the authors are constructing courseware to help instructors of non-design engineering courses embed rich and consistent design projects into their courses. A “lightweight” Fast-Design process was developed. Course-specific design project examples of the process are being developed for five 3rd year courses using this design process. Current versions of all courseware are freely available. This paper details the nature of the courseware and how it was designed, developed,and deployed for the project. To date, one case has been deployed, two developed, and two more are under development. While results are so far only anecdotal, there is reason to believe that our approach can noticeably improve the design experience of students in non-design engineering courses.

Providing a uniform design experience in an undergraduate Mechanical Engineering Program

2021 ◽  
Author(s):  
Filippo A. Salustri ◽  
W. Patrick Neumann
Keyword(s):  
Design Process ◽  
Mechanical Engineering ◽  
Uniform Design ◽  
Design Engineering ◽  
Specific Design ◽  
Design Work ◽  
Design Project ◽  
Engineering Program ◽  
Design Projects ◽  
Design Experience

The design experience of 3rd year undergraduates in Mechanical Engineering at Ryerson University, and the assessment of student design work, was found to be disjointed and highly variable across the program. To attempt to address this, the authors are constructing courseware to help instructors of non-design engineering courses embed rich and consistent design projects into their courses. A “lightweight” Fast-Design process was developed. Course - specific design project examples of the process are being developed for five 3rd year courses using this design process. Current versions of all courseware are freely available. This paper details the nature of the courseware and how it was designed, developed, and deployed for the project. To date, one case has been deployed, two developed, and two more are under development. While results are so far only anecdotal, there is reason to believe that our approach can noticeably improve the design experience of students in non-design engineering courses.

scholarly journals STUDENT FEEDBACK AND PROBLEM DEVELOPMENT FOR WEBWORK IN A SECOND-YEAR MECHANICAL ENGINEERING PROGRAM

2018 ◽  
Author(s):  
Agnes G. D'Entremont ◽  
Patrick J. Walls ◽  
Peter A. Cripton
Keyword(s):  
Open Problem ◽  
Mechanical Engineering ◽  
Ease Of Use ◽  
Student Feedback ◽  
Online Homework ◽  
Engineering Program ◽  
Mathematics Problems ◽  
Survey Results ◽  
Second Year ◽  
Blackboard Learn

Abstract – WeBWorK is a widely-used open-source, online homework tool where instructors may author their own problems, or select problems from an Open Problem Library. While it is extensively and globally used in mathematics, there are few problems available for engineering subjects. Due to initial student feedback based on mathematics problems, we decided to compare WeBWorK directly to our Blackboard Learn LMS for online homework during an integrated second-year Mechanical Engineering program. Students were assigned two problem sets in Blackboard and two problem sets in WeBWorK, and then completed a survey. Results show a strong preference for WeBWorK in all areas, including ease of use, ease of navigation, clear feedback, reported enhancement of learning, etc. We outline the primary benefits and drawbacks of using WeBWorK, and conclude by recommending WeBWorK for online homework in engineering courses.  

The Influence of Physical Examples on Originality and Fixation in Engineering Design

2018 ◽  
Author(s):  
Christopher C. Simmons ◽  
Trina C. Kershaw ◽  
Alexander LeGendre ◽  
Sankha Bhowmick
Keyword(s):  
Engineering Design ◽  
Significant Relationship ◽  
Mechanical Engineering ◽  
Engineering Students ◽  
Garbage Collection ◽  
Negative Relationship ◽  
Design Approach ◽  
Engineering Program ◽  
The Relationship

Improving creativity in engineering design continues to be a challenge. The relationship between fixation and creativity within engineering is mixed, as engineers desire to be innovative, yet are usually working from their existing knowledge to redesign existing products. In the current study, we wanted to examine the influence of physical examples on originality and fixation at the freshmen and senior level in a Mechanical Engineering program. We compared concepts for garbage collection systems generated by two groups — one provided with an example product (Example group), and another who did not receive an example product (No Example group). Using metrics established in prior publications, we found that seniors had higher levels of originality than freshmen whether an example product was received or not, reinforcing our previous findings. Fixation scores were higher for the group that did have an example. Receiving an example product was not a predictor of originality on its own, but did interact with curriculum and fixation level. Within the group that received an example product, there was a negative relationship between fixation and originality, particularly for the seniors. Within the group that did not receive an example product, there was no significant relationship between fixation and originality. Further analysis of our results are required to delineate how not receiving an example product influences design approach in freshmen and senior engineering students.

Sign in / Sign up

Export Citation Format

Share Document