Geotextile filter treatment of combined sewer discharges

2021 ◽  
Author(s):  
Roger Joseph Marino
Keyword(s):  
Combined Sewer ◽  
Geotextile Filter

CSO Modelling Considering Moving Storms and Tipping Bucket Gauge Failures

2007 ◽  
Vol 2 (1) ◽  
Author(s):  
M. Hochedlinger ◽  
W. Sprung ◽  
H. Kainz ◽  
K. König
Keyword(s):  
Hydrological Models ◽  
Rain Intensity ◽  
Hydrodynamic Models ◽  
Data Intensive ◽  
Storm Flow ◽  
Cell Velocity ◽  
Combined Sewer ◽  
Moving Direction ◽  
The Difference

The simulation of combined sewer overflow volumes and loads is important for the assessment of the overflow and overflow load to the receiving water to predict the hydraulic or the pollution impact. Hydrodynamic models are very data-intensive and time-consuming for long-term quality modelling. Hence, for long-term modelling, hydrological models are used to predict the storm flow in a fast way. However, in most cases, a constant rain intensity is used as load for the simulation, but in practice even for small catchments rain occurs in rain cells, which are not constant over the whole catchment area. This paper presents the results of quality modelling considering moving storms depending on the rain cell velocity and its moving direction. Additionally, tipping bucket gauge failures and different corrections are also taken into account. The results evidence the importance of these considerations for precipitation due the effects on overflow load and show the difference up to 28% of corrected and uncorrected data and of moving rain cells instead of constant raining intensities.

Implementation of Hamilton-Wentworth Region’s Pollution Control Plan

1996 ◽  
Vol 31 (3) ◽  
pp. 453-472 ◽  
Author(s):  
M. Stirrup
Keyword(s):  
Wastewater Treatment ◽  
Pollution Control ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Control Measures ◽  
Storm Events ◽  
Combined Sewer Overflows ◽  
Control Plan ◽  
Combined Sewer ◽  
Sewer Overflows

Abstract The Regional Municipality of Hamilton-Wentworth operates a large combined sewer system which diverts excess combined sewage to local receiving waters at over 20 locations. On average, there are approximately 23 combined sewer overflows per year, per outfall. The region’s Pollution Control Plan, adopted by Regional Council in 1992, concluded that the only reasonable means of dealing with large volumes of combined sewer overflow in Hamilton was to intercept it at the outlets, detain it and convey it to the wastewater treatment plant after the storm events. The recommended control strategy relies heavily on off-line storage, with an associated expansion of the Woodward Avenue wastewater treatment plant to achieve target reductions of combined sewer overflows to 1–4 per year on average. The region has begun to implement this Pollution Control Plan in earnest. Three off-line detention storage tanks are already in operation, construction of a fourth facility is well underway, and conceptual design of a number of other proposed facilities has commenced. To make the best possible use of these facilities and existing in-line storage, the region is implementing a microcomputer-based real-time control system. A number of proposed Woodward Avenue wastewater treatment plant process upgrades and expansions have also been undertaken. This paper reviews the region's progress in implementing these control measures.

Long-Term Simulation of Pollutant Loads in Treatment Plant Effluents and Combined Sewer Overflows

1990 ◽  
Vol 22 (10-11) ◽  
pp. 69-76 ◽  
Author(s):  
A. Durchschlag
Keyword(s):  
Waste Water Treatment ◽  
Treatment Plant ◽  
Storm Water ◽  
Water Runoff ◽  
Storage Tanks ◽  
Combined Sewer Overflows ◽  
Storm Water Runoff ◽  
Combined Sewer ◽  
Hydraulic Load ◽  
Water Tanks

As a result of urbanization, the pollutant discharges from sources such as treatment plant effluents and polluted stormwaters are responsible for an unacceptable water quality in the receiving waters.In particular, combined sewer system overflows may produce great damage due to a shock effect. To reduce these combined sewer overflow discharges, the most frequently used method is to build stormwater storage tanks. During storm water runoff, the hydraulic load of waste water treatment plants increases with additional retention storage. This might decrease the treatment efficiency and thereby decrease the benefit of stormwater storage tanks. The dynamic dependence between transport, storage and treatment is usually not taken into account. This dependence must be accounted for when planning treatment plants and calculating storage capacities in order to minimize the total pollution load to the receiving waters. A numerical model will be described that enables the BOD discharges to be continuously calculated. The pollutant transport process within the networks and the purification process within the treatment plants are simulated. The results of the simulation illustrate; a statistical balance of the efficiency of stormwater tanks with the treatment plant capacity and to optimize the volume of storm water tanks and the operation of combined sewer systems and treatment plants.

Methods for Calculation of Annual and Extreme Overflow Events from Combined Sewer Systems

1984 ◽  
Vol 16 (8-9) ◽  
pp. 311-325 ◽  
Author(s):  
N B Johansen ◽  
P Harremoës ◽  
M Jensen
Keyword(s):  
Extreme Event ◽  
Short Term ◽  
Sewer Systems ◽  
Extreme Load ◽  
Combined Sewer ◽  
Receiving Waters ◽  
Water Problems ◽  
Source Of Pollution ◽  
Receiving Water

Overflow from combined systems constitute an increasing source of pollution of receiving waters, as compared to daily wastewater discharges which undergo treatment to a still higher extent. The receiving water problems from overflows are significant both in a long term scale (mean annual load) and in a short term scale (extreme event load). A method for computation of both annual and extreme load is presented. It is based on historical rain series and the use of a time-area model and simple pollutant mixing model in runoff calculation. Statistical calculations for both mean annual load and extreme events have been applied to the computed overflow series. Based on the computerized method simple manual calculations methods have been developed, resulting in graphs and tables for annual load and extreme load.

Monitoring runoff conditions in a combined sewer system: experience and results of ten years' application

1996 ◽  
Vol 33 (1) ◽  
pp. 257-264
Author(s):  
M. Weyand
Keyword(s):  
Monitoring System ◽  
Pilot Project ◽  
Actual Condition ◽  
Real Time Control ◽  
Sewer System ◽  
Time Control ◽  
Combined Sewer ◽  
Complete Breakdown ◽  
Short Time ◽  
Detention Facilities

To get knowledge about the runoff, storage and combined sewer overflow (CSO) conditions since 1985 a measuring and monitoring system is working in the sewer network of the community Ense-Bremen (near Dortmund). Within this semi-urban catchment seven detention facilities are fitted out with devices for monitoring information about basin outflow, grade of volume and CSO. Since October 1986 the determined data are also used for the real-time control of that sewerage. Since its installation the monitoring system works rather satisfyingly. Especially the operating staff use its possibilities to get information about the actual condition of the sewer system. Thus, differences to the normal runoff conditions can be realised in very short time. That allows an immediate reaction in order to clear malfunctions or errors as well. However, within the ten years there have also occurred some failures at the measuring devices caused by different reasons up to a complete breakdown of the whole system during thunder-storms. All in all the results of that pilot project have been positive and are now the basis for the equipment of further detention facilities in other sewer systems with monitoring devices.

Methods for studying dissolved oxygen levels in coastal and estuarine waters receiving combined sewer overflows

1995 ◽  
Vol 32 (2) ◽  
pp. 95-103
Author(s):  
José A. Revilla ◽  
Kalin N. Koev ◽  
Rafael Díaz ◽  
César Álvarez ◽  
Antonio Roldán
Keyword(s):  
Dissolved Oxygen ◽  
Coastal Waters ◽  
Computational Cost ◽  
Oxygen Deficit ◽  
Alternative Methods ◽  
Coastal Zones ◽  
Combined Sewer Overflows ◽  
Sewer Systems ◽  
Combined Sewer ◽  
High Computational Cost

One factor in determining the transport capacity of coastal interceptors in Combined Sewer Systems (CSS) is the reduction of Dissolved Oxygen (DO) in coastal waters originating from the overflows. The study of the evolution of DO in coastal zones is complex. The high computational cost of using mathematical models discriminates against the required probabilistic analysis being undertaken. Alternative methods, based on such mathematical modelling, employed in a limited number of cases, are therefore needed. In this paper two alternative methods are presented for the study of oxygen deficit resulting from overflows of CSS. In the first, statistical analyses focus on the causes of the deficit (the volume discharged). The second concentrates on the effects (the concentrations of oxygen in the sea). Both methods have been applied in a study of the coastal interceptor at Pasajes Estuary (Guipúzcoa, Spain) with similar results.

A STRATEGY FOR MONITORING THE IMPACTS OF COMBINED SEWER OVERFLOWS ON THE OHIO RIVER

1994 ◽  
Vol 30 (1) ◽  
pp. 167-175
Author(s):  
Alan H. Vicory ◽  
Peter A. Tennant
Keyword(s):  
National Policy ◽  
The United States ◽  
Ohio River ◽  
Combined Sewer Overflows ◽  
Treatment Technology ◽  
Design Storm ◽  
Combined Sewer ◽  
Sewer Overflows ◽  
Definition Of ◽  
And Control

With the attainment of secondary treatment by virtually all municipal discharges in the United States, control of water pollution from combined sewer overflows (CSOs) has assumed a high priority. Accordingly, a national strategy was issued in 1989 which, in 1993, was expanded into a national policy on CSO control. The national policy establishes as an objective the attainment of receiving water quality standards, rather than a design storm/treatment technology based approach. A significant percentage of the CSOs in the U.S. are located along the Ohio River. The states along the Ohio have decided to coordinate their CSO control efforts through the Ohio River Valley Water Sanitation Commission (ORSANCO). With the Commission assigned the responsibility of developing a monitoring approach which would allow the definition of CSO impacts on the Ohio, research by the Commission found that very little information existed on the monitoring and assessment of large rivers for the determination of CSO impacts. It was therefore necessary to develop a strategy for coordinated efforts by the states, the CSO dischargers, and ORSANCO to identify and apply appropriate monitoring approaches. A workshop was held in June 1993 to receive input from a variety of experts. Taking into account this input, a strategy has been developed which sets forth certain approaches and concepts to be considered in assessing CSO impacts. In addition, the strategy calls for frequent sharing of findings in order that the data collection efforts by the several agencies can be mutually supportive and lead to technically sound answers regarding CSO impacts and control needs.

The Role of Computer Modeling in Combined Sewer Overflow Abatement Planning

1992 ◽  
Vol 26 (7-8) ◽  
pp. 1831-1840 ◽  
Author(s):  
L. A. Roesner ◽  
E. H. Burgess
Keyword(s):  
System Modeling ◽  
Cost Effective ◽  
Combined Sewer Overflows ◽  
Sewer System ◽  
New Techniques ◽  
Hydraulic Simulation ◽  
Continuous Simulation ◽  
Combined Sewer ◽  
The U.S

Increased concern regarding water quality impacts from combined sewer overflows (CSOs) in the U.S. and elsewhere has emphasized the role of computermodeling in analyzing CSO impacts and in planning abatement measures. These measures often involve the construction of very large and costly facilities, and computer simulation during plan development is essential to cost-effective facility sizing. An effective approach to CSO system modeling focuses on detailed hydraulic simulation of the interceptor sewers in conjunction with continuous simulation of the combined sewer system to characterize CSOs and explore storage-treatment tradeoffs in planning abatement facilities. Recent advances in microcomputer hardware and software have made possible a number of new techniques which facilitate the use of computer models in CSO abatement planning.

Sign in / Sign up

Export Citation Format

Share Document