scholarly journals Methodology for Validation of Simulated Ground Motions for Seismic Response Assessment: Application to CyberShake Source-Based Ground Motions

2020 ◽  
Author(s):  
Jawad Fayaz ◽  
Sarah Azar ◽  
Mayssa Dabaghi ◽  
Farzin Zareian
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Site Response ◽  
Ground Motions ◽  
Engineering Application ◽  
Response Assessment ◽  
Simulation Method ◽  
Earthquake Scenarios ◽  
Structural Responses ◽  
Simulated Ground Motions

ABSTRACT A comprehensive methodology for the validation of simulated ground motions is presented. The suggested methodology can be geared toward any ground-motion simulation method and seismic response assessment, in a target engineering application. The methodology is founded on the comparison between conforming groups of ground-motion waveforms from recordings and simulations and their effect on a representative collection of structures that represent the engineering application. The comparison considers the statistics of earthquake scenarios at the level of the event and site parameters, the resulting waveform characteristics, and the subsequent structural responses. Regression models are developed at three levels (between structural responses and waveform characteristics, structural responses and event and site parameters, and waveform characteristics and event and site parameters). Similarities between the models from groups of recorded and simulated ground motions guide the validation process. The validation methodology is applied to CyberShake (v.15.12) simulations and for the estimation of the column drift ratio of a bridge structure. It is shown that CyberShake (v.15.12) can be used to assess the median seismic response of the used bridge. Some discrepancies between simulations and recordings are observed, which could be attributed to the basin and site-response models used for simulations. Further implementation and refinement of the suggested methodology are recommended to make broader conclusions.

scholarly journals Simulation of response spectrum-compatible ground motions using wavelet-based multi-resolution analysis

2021 ◽  
pp. 002029402110130
Author(s):  
Guan Chen ◽  
Zhiren Zhu ◽  
Jun Hu
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Ground Motions ◽  
Power Spectra ◽  
Simulation Method ◽  
Eurocode 8 ◽  
Effective Response ◽  
Multi Resolution Analysis ◽  
Resolution Analysis ◽  
Simulated Ground Motions

This study proposed a simple and effective response spectrum-compatible ground motions simulation method to mitigate the scarcity of ground motions on seismic hazard analysis base on wavelet-based multi-resolution analysis. The feasibility of the proposed method is illustrated with two recorded ground motions in El Mayor-Cucapah earthquake. The results show that the proposed method enriches the ground motions exponentially. The simulated ground motions agree well with the attenuation characteristics of seismic ground motion without modulating process. Moreover, the pseudo-acceleration response spectrum error between the recorded ground motion and the average of the simulated ground motions is 5.2%, which fulfills the requirement prescribed in Eurocode 8 for artificially simulated ground motions. Besides, the cumulative power spectra between the simulated and recorded ground motions agree well on both high- and low-frequency regions. Therefore, the proposed method offers a feasible alternative in enriching response spectrum-compatible ground motions, especially on the regions with insufficient ground motions.

A subset of CyberShake ground-motion time series for response-history analysis

2021 ◽  
pp. 875529302098197
Author(s):  
Jack W Baker ◽  
Sanaz Rezaeian ◽  
Christine A Goulet ◽  
Nicolas Luco ◽  
Ganyu Teng
Keyword(s):  
Time Series ◽  
Los Angeles ◽  
Seismic Hazard ◽  
Ground Motion ◽  
Ground Motions ◽  
Response Spectra ◽  
Motion Time ◽  
History Analysis ◽  
Response History Analysis ◽  
Simulated Ground Motions

This manuscript describes a subset of CyberShake numerically simulated ground motions that were selected and vetted for use in engineering response-history analyses. Ground motions were selected that have seismological properties and response spectra representative of conditions in the Los Angeles area, based on disaggregation of seismic hazard. Ground motions were selected from millions of available time series and were reviewed to confirm their suitability for response-history analysis. The processes used to select the time series, the characteristics of the resulting data, and the provided documentation are described in this article. The resulting data and documentation are available electronically.

Evaluation of Earthquake Response Spectra Directionality Using Stochastic Simulations

2021 ◽  
Author(s):  
Alan Poulos ◽  
Eduardo Miranda ◽  
Jack W. Baker
Keyword(s):  
Stochastic Process ◽  
Ground Motion ◽  
Ground Motions ◽  
Gaussian White Noise ◽  
Response Spectra ◽  
Orientation Dependence ◽  
Stochastic Simulations ◽  
Earthquake Ground Motion ◽  
Significant Duration ◽  
Simulated Ground Motions

ABSTRACT For earthquake-resistant design purposes, ground-motion intensity is usually characterized using response spectra. The amplitude of response spectral ordinates of horizontal components varies significantly with changes in orientation. This change in intensity with orientation is commonly known as ground-motion directionality. Although this directionality has been attributed to several factors, such as topographic irregularities, near-fault effects, and local geologic heterogeneities, the mechanism behind this phenomenon is still not well understood. This work studies the directionality characteristics of earthquake ground-motion intensity using synthetic ground motions and compares their directionality to that of recorded ground motions. The two principal components of horizontal acceleration are sampled independently using a stochastic model based on finite-duration time-modulated filtered Gaussian white-noise processes. By using the same stochastic process to sample both horizontal components of motion, the variance of horizontal ground acceleration has negligible orientation dependence. However, these simulations’ response spectral ordinates present directionality levels comparable to those found in real ground motions. It is shown that the directionality of the simulated ground motions changes for each realization of the stochastic process and is a consequence of the duration being finite. Simulated ground motions also present similar directionality trends to recorded earthquake ground motions, such as the increase of average directionality with increasing period of vibration and decrease with increasing significant duration. These results suggest that most of the orientation dependence of horizontal response spectra is primarily explained by the finite significant duration of earthquake ground motion causing inherent randomness in response spectra, rather than by some physical mechanism causing polarization of shaking.

Simulation and analysis of a vertically irregular building subjected to near-fault ground motions

2020 ◽  
Vol 36 (3) ◽  
pp. 1485-1516
Author(s):  
Jui-Liang Lin ◽  
Wen-Hui Chen ◽  
Fu-Pei Hsiao ◽  
Yuan-Tao Weng ◽  
Wen-Cheng Shen ◽  
...  
Keyword(s):  
Numerical Model ◽  
Seismic Response ◽  
Ground Motion ◽  
Ground Motions ◽  
Far Field ◽  
Near Fault ◽  
Study Results ◽  
Rc Building ◽  
Near Fault Ground Motion ◽  
Story Building

A shaking table test of a three-story reinforced concrete (RC) building was conducted. The tested building is vertically irregular because of the first story’s elevated height and the third story’s added RC walls. In addition to far-field ground motions, near-fault ground motions were exerted on this building. A numerical model of the three-story building was constructed. Comparing with the test results indicates that the numerical model is satisfactory for simulating the seismic response of the three-story building. This validated numerical model was then further applied to look into two issues: the effective section rigidities of RC members and the effects of near-fault ground motions. The study results show the magnitude of the possible discrepancy between the actual seismic response and the estimated seismic response, when the effective section rigidities of the RC members are treated as in common practice. An incremental dynamic analysis of the three-story RC building subjected to one far-field and one near-fault ground motion, denoted as CHY047 and TCU052, respectively, was conducted. In comparison with the far-field ground motion, the near-fault ground motion is more destructive to this building. In addition, the effect of the selected near-fault ground motion (i.e. TCU052) on the building’s collapse is clearly identified.

Repeatable Source, Path, and Site Effects from the 2019 M 7.1 Ridgecrest Earthquake Sequence

2020 ◽  
Vol 110 (4) ◽  
pp. 1530-1548 ◽  
Author(s):  
Grace A. Parker ◽  
Annemarie S. Baltay ◽  
John Rekoske ◽  
Eric M. Thompson
Keyword(s):  
Los Angeles ◽  
Ground Motion ◽  
Site Response ◽  
Ground Motions ◽  
Warning System ◽  
Site Amplification ◽  
Earthquake Sequence ◽  
Ground Acceleration ◽  
Small Magnitude ◽  
Earthquake Early Warning System

ABSTRACT We use a large instrumental dataset from the 2019 Ridgecrest earthquake sequence (Rekoske et al., 2019, 2020) to examine repeatable source-, path-, and site-specific ground motions. A mixed-effects analysis is used to partition total residuals relative to the Boore et al. (2014; hereafter, BSSA14) ground-motion model. We calculate the Arias intensity stress drop for the earthquakes and find strong correlation with our event terms, indicating that they are consistent with source processes. We look for physically meaningful trends in the partitioned residuals and test the ability of BSSA14 to capture the behavior we observe in the data. We find that BSSA14 is a good match to the median observations for M>4. However, we find bias for individual events, especially those with small magnitude and hypocentral depth≥7  km, for which peak ground acceleration is underpredicted by a factor of 2.5. Although the site amplification term captures the median site response when all sites are considered together, it does not capture variations at individual stations across a range of site conditions. We find strong basin amplification in the Los Angeles, Ventura, and San Gabriel basins. We find weak amplification in the San Bernardino basin, which is contrary to simulation-based findings showing a channeling effect from an event with a north–south azimuth. This and an additional set of ground motions from earthquakes southwest of Los Angeles suggest that there is an azimuth-dependent southern California basin response related to the orientation of regional structures when ground motion from waves traveling south–north are compared with those in the east–west direction. These findings exhibit the power of large, spatially dense ground-motion datasets and make clear that nonergodic models are a way to reduce bias and uncertainty in ground-motion estimation for applications like the U.S. Geological Survey National Seismic Hazard Model and the ShakeAlert earthquake early warning System.

Evaluation of Hybrid Broadband Ground Motion Simulations for Response History Analysis and Design

2015 ◽  
Vol 31 (3) ◽  
pp. 1691-1710 ◽  
Author(s):  
Lynne S. Burks ◽  
Reid B. Zimmerman ◽  
Jack W. Baker
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Spectral Response ◽  
Analysis And Design ◽  
History Analysis ◽  
Response History Analysis ◽  
Simulated Ground Motions ◽  
Broadband Ground Motion ◽  
New Buildings ◽  
Selection Of

Chapter 16 of ASCE 7 governs the selection of ground motions for analysis of new buildings and requires recordings that meet specified criteria. If a sufficient number of recordings cannot be found, it allows the use of “appropriate simulated ground motions,” but does not provide further guidance. This paper outlines a procedure for generating and selecting a set of “appropriate” hybrid broadband simulations and a comparable set of recordings. Both ground motion sets are used to analyze a building in Berkeley, California, and the predicted structural performance is compared. The structural behavior resulting from recordings and simulations is similar, and most discrepancies are explained by differences in directional properties such as orientation of the maximum spectral response. These results suggest that when simulations meet the criteria outlined for recordings in ASCE 7 and properties such as directionality are realistically represented, simulations provide useful results for structural analysis and design.

Spatial Variability of Source and Attenuation Characteristics in Large Ground-Motion Datasets

2020 ◽  
Author(s):  
Sreeram Reddy Kotha ◽  
Graeme Weatherill ◽  
Dino Bindi ◽  
Fabrice Cotton
Keyword(s):  
Spatial Variability ◽  
Ground Motion ◽  
Ground Motions ◽  
Low Frequency ◽  
Strong Motion ◽  
Response Spectra ◽  
Large Datasets ◽  
Earthquake Scenarios ◽  
Crustal Earthquakes ◽  
Geographical Regions

<p>Ground-Motion Models (GMMs) characterize the random distributions of ground-motions for a combination of earthquake source, wave travel-path, and the effected site’s geological properties. Typically, GMMs are regressed over a compendium of strong ground-motion recordings collected from several earthquakes recorded at multiple sites scattered across a variety of geographical regions. The necessity of compiling such large datasets is to expand the range of magnitude, distance, and site-types; in order to regress a GMM capable of predicting realistic ground-motions for rare earthquake scenarios, e.g. large magnitudes at short distances from a reference rock site. The European Strong-Motion (ESM) dataset is one such compendium of observations from a few hundred shallow crustal earthquakes recorded at a several hundred seismic stations in Europe and Middle-East.</p><p>We developed new GMMs from the ESM dataset, capable of predicting both the response spectra and Fourier spectra in a broadband of periods and frequencies, respectively. However, given the clear tectonic and geological diversity of the data, possible regional and site-specific differences in observed ground-motions needed to be quantified; whilst also considering the possible contamination of data from outliers. Quantified regional differences indicate that high-frequency ground-motions attenuate faster with distance in Italy compared to the rest of Europe, as well as systematically weaker ground-motions from central Italian earthquakes. In addition, residual analyses evidence anisotropic attenuation of low frequency ground-motions, imitating the pattern of shear-wave energy radiation. With increasing spatial variability of ground-motion data, the GMM prediction variability apparently increases. Hence, robust mixed-effects regressions and residual analyses are employed to relax the ergodic assumption.</p><p>Large datasets, such as the ESM, NGA-West2, and from KiK-Net, provide ample opportunity to identify and evaluate the previously hypothesized event-to-event, region-to-region, and site-to-site differences in ground-motions. With the appropriate statistical methods, these variabilities can be quantified and applied in seismic hazard and risk predictions. We intend to present the new GMMs: their development, performance and applicability, prospective improvements and research needs.</p>

Nonlinear site effects on strong ground motion at a reclaimed island

2000 ◽  
Vol 37 (1) ◽  
pp. 26-39 ◽  
Author(s):  
Jun Yang ◽  
Tadanobu Sato ◽  
Xiang-Song Li
Keyword(s):  
Ground Motion ◽  
Site Effects ◽  
Site Response ◽  
Ground Motions ◽  
Soil Liquefaction ◽  
Large Strains ◽  
Stress Strain ◽  
Element Analysis ◽  
Soil Response ◽  
Kobe Earthquake

Recently there has been an increased interest in the study of the nonlinearity in soil response for large strains through in situ earthquake observations. In this paper, the downhole array acceleration data recorded at a reclaimed island, Kobe, during the 1995 Kobe earthquake are used to study nonlinear site effects. Particular attention is given to the liquefaction-induced nonlinear effects on the recorded ground motions. By using the spectral ratio and the spectral-smoothing technique, the characteristics of the ground motions are analyzed. It is shown that the peak frequencies in spectral ratios were shifted to lower frequencies when the strongest motions occurred. The increase in the predominant period was caused primarily by a strong attenuation of low-period waves, rather than by amplification of long-period motions. Based on the spectral analyses, the nonlinearity occurring in the shallow liquefied layer during the shaking event is identified, manifested by a significant reduction of the shear modulus. A fully coupled, inelastic, finite element analysis of the response of the array site is carried out. The stress-strain histories of soils and excess pore-water pressures at different depths are calculated. It is suggested that the stress-strain response and the build up of pore pressure are well correlated to the variation of the characteristics of ground motions during the shaking history.Key words: site response, ground motion, nonlinearity, soil liquefaction, array records, Kobe earthquake.

Sign in / Sign up

Export Citation Format

Share Document