Seismic response of R/C structures subjected to simulated ground motions compatible with design spectrum

2010 ◽  
Vol 22 (1) ◽  
pp. 74-91 ◽  
Author(s):  
Dae-Han Jun
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
Design Spectrum ◽  
Simulated Ground Motions

scholarly journals Methodology for Validation of Simulated Ground Motions for Seismic Response Assessment: Application to CyberShake Source-Based Ground Motions

2020 ◽  
Author(s):  
Jawad Fayaz ◽  
Sarah Azar ◽  
Mayssa Dabaghi ◽  
Farzin Zareian
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Site Response ◽  
Ground Motions ◽  
Engineering Application ◽  
Response Assessment ◽  
Simulation Method ◽  
Earthquake Scenarios ◽  
Structural Responses ◽  
Simulated Ground Motions

ABSTRACT A comprehensive methodology for the validation of simulated ground motions is presented. The suggested methodology can be geared toward any ground-motion simulation method and seismic response assessment, in a target engineering application. The methodology is founded on the comparison between conforming groups of ground-motion waveforms from recordings and simulations and their effect on a representative collection of structures that represent the engineering application. The comparison considers the statistics of earthquake scenarios at the level of the event and site parameters, the resulting waveform characteristics, and the subsequent structural responses. Regression models are developed at three levels (between structural responses and waveform characteristics, structural responses and event and site parameters, and waveform characteristics and event and site parameters). Similarities between the models from groups of recorded and simulated ground motions guide the validation process. The validation methodology is applied to CyberShake (v.15.12) simulations and for the estimation of the column drift ratio of a bridge structure. It is shown that CyberShake (v.15.12) can be used to assess the median seismic response of the used bridge. Some discrepancies between simulations and recordings are observed, which could be attributed to the basin and site-response models used for simulations. Further implementation and refinement of the suggested methodology are recommended to make broader conclusions.

Effects of Fling Step and Forward Directivity on Seismic Response of Buildings

2006 ◽  
Vol 22 (2) ◽  
pp. 367-390 ◽  
Author(s):  
Erol Kalkan ◽  
Sashi K. Kunnath
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
High Amplitude ◽  
Moment Frames ◽  
Steel Moment Frames ◽  
Damage Potential ◽  
Near Fault ◽  
Forward Directivity ◽  
Fling Step ◽  
Far Fault

This paper investigates the consequences of well-known characteristics of near-fault ground motions on the seismic response of steel moment frames. Additionally, idealized pulses are utilized in a separate study to gain further insight into the effects of high-amplitude pulses on structural demands. Simple input pulses were also synthesized to simulate artificial fling-step effects in ground motions originally having forward directivity. Findings from the study reveal that median maximum demands and the dispersion in the peak values were higher for near-fault records than far-fault motions. The arrival of the velocity pulse in a near-fault record causes the structure to dissipate considerable input energy in relatively few plastic cycles, whereas cumulative effects from increased cyclic demands are more pronounced in far-fault records. For pulse-type input, the maximum demand is a function of the ratio of the pulse period to the fundamental period of the structure. Records with fling effects were found to excite systems primarily in their fundamental mode while waveforms with forward directivity in the absence of fling caused higher modes to be activated. It is concluded that the acceleration and velocity spectra, when examined collectively, can be utilized to reasonably assess the damage potential of near-fault records.

A subset of CyberShake ground-motion time series for response-history analysis

2021 ◽  
pp. 875529302098197
Author(s):  
Jack W Baker ◽  
Sanaz Rezaeian ◽  
Christine A Goulet ◽  
Nicolas Luco ◽  
Ganyu Teng
Keyword(s):  
Time Series ◽  
Los Angeles ◽  
Seismic Hazard ◽  
Ground Motion ◽  
Ground Motions ◽  
Response Spectra ◽  
Motion Time ◽  
History Analysis ◽  
Response History Analysis ◽  
Simulated Ground Motions

This manuscript describes a subset of CyberShake numerically simulated ground motions that were selected and vetted for use in engineering response-history analyses. Ground motions were selected that have seismological properties and response spectra representative of conditions in the Los Angeles area, based on disaggregation of seismic hazard. Ground motions were selected from millions of available time series and were reviewed to confirm their suitability for response-history analysis. The processes used to select the time series, the characteristics of the resulting data, and the provided documentation are described in this article. The resulting data and documentation are available electronically.

scholarly journals Simulation of response spectrum-compatible ground motions using wavelet-based multi-resolution analysis

2021 ◽  
pp. 002029402110130
Author(s):  
Guan Chen ◽  
Zhiren Zhu ◽  
Jun Hu
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Ground Motions ◽  
Power Spectra ◽  
Simulation Method ◽  
Eurocode 8 ◽  
Effective Response ◽  
Multi Resolution Analysis ◽  
Resolution Analysis ◽  
Simulated Ground Motions

This study proposed a simple and effective response spectrum-compatible ground motions simulation method to mitigate the scarcity of ground motions on seismic hazard analysis base on wavelet-based multi-resolution analysis. The feasibility of the proposed method is illustrated with two recorded ground motions in El Mayor-Cucapah earthquake. The results show that the proposed method enriches the ground motions exponentially. The simulated ground motions agree well with the attenuation characteristics of seismic ground motion without modulating process. Moreover, the pseudo-acceleration response spectrum error between the recorded ground motion and the average of the simulated ground motions is 5.2%, which fulfills the requirement prescribed in Eurocode 8 for artificially simulated ground motions. Besides, the cumulative power spectra between the simulated and recorded ground motions agree well on both high- and low-frequency regions. Therefore, the proposed method offers a feasible alternative in enriching response spectrum-compatible ground motions, especially on the regions with insufficient ground motions.

Sloshing Response of Floating Roofed Liquid Storage Tanks Subjected to Earthquakes of Different Types

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
F. G. Golzar ◽  
R. Shabani ◽  
S. Tariverdilo ◽  
G. Rezazadeh
Keyword(s):  
Ground Motions ◽  
Far Field ◽  
Storage Tanks ◽  
Natural Period ◽  
Design Spectrum ◽  
Long Period ◽  
Lateral Forces ◽  
Different Types ◽  
Hamiltonian Variational Principle ◽  
Stress Patterns

Using extended Hamiltonian variational principle, the governing equations for sloshing response of floating roofed storage tanks are derived. The response of the floating roofed storage tanks is evaluated for different types of ground motions, including near-source and long-period far-field records. Besides comparing the response of the roofed and unroofed tanks, the effect of different ground motions on the wave elevation, lateral forces, and overturning moments induced on the tank is investigated. It is concluded that the dimensionless sloshing heights for the roofed tanks are solely a function of their first natural period. Also it is shown that while long-period far-field ground motions control the free board height, near-source records give higher values for lateral forces and overturning moments induced on the tank. This means that same design spectrum could not be used to evaluate the free board and lateral forces in the seismic design of storage tanks. Finally, two cases are studied to reveal the stress patterns caused by different earthquakes.

Sign in / Sign up

Export Citation Format

Share Document