Long- and Short-Term Stress Interaction of the 2019 Ridgecrest Sequence and Coulomb-Based Earthquake Forecasts

2020 ◽  
Vol 110 (4) ◽  
pp. 1765-1780 ◽  
Author(s):  
Shinji Toda ◽  
Ross S. Stein

Abstract We first explore a series of retrospective earthquake interactions in southern California. We find that the four Mw≥7 shocks in the past 150 yr brought the Ridgecrest fault ∼1  bar closer to failure. Examining the 34 hr time span between the Mw 6.4 and Mw 7.1 events, we calculate that the Mw 6.4 event brought the hypocentral region of the Mw 7.1 earthquake 0.7 bars closer to failure, with the Mw 7.1 event relieving most of the surrounding stress that was imparted by the first. We also find that the Mw 6.4 cross-fault aftershocks shut down when they fell under the stress shadow of the Mw 7.1. Together, the Ridgecrest mainshocks brought a 120 km long portion of the Garlock fault from 0.2 to 10 bars closer to failure. These results motivate our introduction of forecasts of future seismicity. Most attempts to forecast aftershocks use statistical decay models or Coulomb stress transfer. Statistical approaches require simplifying assumptions about the spatial distribution of aftershocks and their decay; Coulomb models make simplifying assumptions about the geometry of the surrounding faults, which we seek here to remove. We perform a rate–state implementation of the Coulomb stress change on focal mechanisms to capture fault complexity. After tuning the model through a learning period to improve its forecast ability, we make retrospective forecasts to assess model’s predictive ability. Our forecast for the next 12 months yields a 2.3% chance of an Mw≥7.5 Garlock fault rupture. If such a rupture occurred and reached within 45 km of the San Andreas, we calculate it would raise the probability of a San Andreas rupture on the Mojave section by a factor of 150. We therefore estimate the net chance of large San Andreas earthquake in the next 12 months to be 1.15%, or about three to five times its background probability.

2011 ◽  
Vol 27 (2) ◽  
pp. 331-350 ◽  
Author(s):  
Lisa M. Star ◽  
Jonathan P. Stewart ◽  
Robert W. Graves

We compare simulated motions for a Mw 7.8 rupture scenario on the San Andreas Fault known as the ShakeOut event, two permutations with different hypocenter locations, and a Mw 7.15 Puente Hills blind thrust scenario, to median and dispersion predictions from empirical NGA ground motion prediction equations. We find the simulated motions attenuate faster with distance than is predicted by the NGA models for periods less than about 5.0 s After removing this distance attenuation bias, the average residuals of the simulated events (i.e., event terms) are generally within the scatter of empirical event terms, although the ShakeOut simulation appears to be a high static stress drop event. The intra-event dispersion in the simulations is lower than NGA values at short periods and abruptly increases at 1.0 s due to different simulation procedures at short and long periods. The simulated motions have a depth-dependent basin response similar to the NGA models, and also show complex effects in which stronger basin response occurs when the fault rupture transmits energy into a basin at low angle, which is not predicted by the NGA models. Rupture directivity effects are found to scale with the isochrone parameter.


2017 ◽  
Vol 210 (2) ◽  
pp. 1206-1218 ◽  
Author(s):  
Zoe K. Mildon ◽  
Gerald P. Roberts ◽  
Joanna P. Faure Walker ◽  
Francesco Iezzi

Abstract In order to investigate the importance of including strike-variable geometry and the knowledge of historical and palaeoseismic earthquakes when modelling static Coulomb stress transfer and rupture propagation, we have examined the August–October 2016 A.D. and January 2017 A.D. central Apennines seismic sequence (Mw 6.0, 5.9, 6.5 in 2016 A.D. (INGV) and Mw 5.1, 5.5, 5.4, 5.0 in 2017 A.D. (INGV)). We model both the coseismic loading (from historical and palaeoseismic earthquakes) and interseismic loading (derived from Holocene fault slip-rates) using strike-variable fault geometries constrained by fieldwork. The inclusion of the elapsed times from available historical and palaeoseismological earthquakes and on faults enables us to calculate the stress on the faults prior to the beginning of the seismic sequence. We take account the 1316–4155 yr elapsed time on the Mt. Vettore fault (that ruptured during the 2016 A.D. seismic sequence) implied by palaeoseismology, and the 377 and 313 yr elapsed times on the neighbouring Laga and Norcia faults respectively, indicated by the historical record. The stress changes through time are summed to show the state of stress on the Mt. Vettore, Laga and surrounding faults prior to and during the 2016–2017 A.D. sequence. We show that the build up of stress prior to 2016 A.D. on strike-variable fault geometries generated stress heterogeneities that correlate with the limits of the main-shock ruptures. Hence, we suggest that stress barriers appear to have control on the propagation and therefore the magnitudes of the main-shock ruptures.


2021 ◽  
Vol 9 ◽  
Author(s):  
Federica Ferrarini ◽  
Rita de Nardis ◽  
Francesco Brozzetti ◽  
Daniele Cirillo ◽  
J Ramón Arrowsmith ◽  
...  

The Apenninic chain, in central Italy, has been recently struck by the Norcia 2016 seismic sequence. Three mainshocks, in 2016, occurred on August 24 (MW6.0), October 26 (MW 5.9) and October 30 (MW6.5) along well-known late Quaternary active WSW-dipping normal faults. Coseismic fractures and hypocentral seismicity distribution are mostly associated with failure along the Mt Vettore-Mt Bove (VBF) fault. Nevertheless, following the October 26 shock, the aftershock spatial distribution suggests the activation of a source not previously mapped beyond the northern tip of the VBF system. In this area, a remarkable seismicity rate was observed also during 2017 and 2018, the most energetic event being the April 10, 2018 (MW4.6) normal fault earthquake. In this paper, we advance the hypothesis that the Norcia seismic sequence activated a previously unknown seismogenic source. We constrain its geometry and seismogenic behavior by exploiting: 1) morphometric analysis of high-resolution topographic data; 2) field geologic- and morphotectonic evidence within the context of long-term deformation constraints; 3) 3D seismological validation of fault activity, and 4) Coulomb stress transfer modeling. Our results support the existence of distributed and subtle deformation along normal fault segments related to an immature structure, the Pievebovigliana fault (PBF). The fault strikes in NNW-SSE direction, dips to SW and is in right-lateral en echelon setting with the VBF system. Its activation has been highlighted by most of the seismicity observed in the sector. The geometry and location are compatible with volumes of enhanced stress identified by Coulomb stress-transfer computations. Its reconstructed length (at least 13 km) is compatible with the occurrence of MW≥6.0 earthquakes in a sector heretofore characterized by low seismic activity. The evidence for PBF is a new observation associated with the Norcia 2016 seismic sequence and is consistent with the overall tectonic setting of the area. Its existence implies a northward extent of the intra-Apennine extensional domain and should be considered to address seismic hazard assessments in central Italy.


2021 ◽  
Author(s):  
Franco Lema ◽  
Mahesh Shrivastava

<p>The delayed aftershocks 2018 Mw 6.2 on April 10 and Mw 5.8 on Sept 1 and 2019 Mw 6.7 on January 20, Mw 6.4 on June 14, and Mw 6.2 on November 4, associated with the Mw 8.3 2015 Illapel Earthquake occurred in the ​​central Chile. The seismic source of this earthquake has been studied with the GPS, InSAR and tide gauge network. Although there are several studies performed to characterize the robust aftershocks and the variations in the field of deformation induced by the megathrust, but there are still aspects to be elucidated of the relationship between the transfer of stresses from the interface between plates towards delayed aftershocks with the crustal structures with seismogenic potential. Therefore, the principal objective of this study is to understand how the stress transfer induced by the 2015 Illapel earthquake of the heterogeneous rupture mechanism to intermediate-deep or crustal earthquakes. For this, coulomb stress changes from  finite fault model of the Illapel earthquake and with the biggest aftershocks in year 2015 are used. These cumulative stress pattern provides substantial evidences for the delayed aftershocks in this region. The subducting Challenger Fault Zone and Juan Fernandez Ridge heterogeneity are existing feature, which releases the accumulated coulomb stress changes and provide delayed aftershocks.  Therefore along with stress induced by a large earthquake such as Mw 8.3 from Illapel 2015 along with biggest aftershocks, have a direct mechanism that may activate the  delayed aftershocks. Our study suggests  the activation of crustal faults in this research as a risk assessment factor for the evaluating in the seismic context of the region and useful for another subduction zone.</p>


1966 ◽  
Vol 56 (2) ◽  
pp. 281-289
Author(s):  
M. G. Bonilla

abstract Slippage (also called creep) on the Hayward fault has produced a right-lateral shift of about 0.7 feet in three sets of railroad tracks that were built 55 and 56 years ago. The average annual rate of 0.15 inch per year is about one-third the average rate of slippage on the San Andreas fault, but the rate has been much greater during short intervals. The zone of acute deformation of the tracks is 20 to 80 feet wide; the tracks are underlain by unconsolidated deposits more than 300 feet thick. Surface faulting at this locality in the 1868, and probably in the 1836, earthquake suggests that the processes of fault rupture and fault slippage can alternate at the same locality.


2018 ◽  
Vol 45 (20) ◽  
Author(s):  
Yan Qin ◽  
Xiaowei Chen ◽  
Brett M. Carpenter ◽  
Folarin Kolawole

Sign in / Sign up

Export Citation Format

Share Document