scholarly journals Change in humidity of solid biofuels

2012 ◽  
Vol 50 (No. 2) ◽  
pp. 61-65
Author(s):  
P. Heneman

Humidity, as one of the most important physical properties of pressed solid biofuels, affects thel calorific value of the biofuel and its consistency. Biofuel humidity depends on the initial humidity of raw material, which varies and depends on many factors. Method of manufacture and place and duration of storage have a considerable effect on solid biofuel humidity as well. Humidity of pressed solid biofuels changes not only during the pressing itself, when temperature increases by compression and a part of contained moisture evaporates, but also in the course of handling and storage under unstable environment conditions with high relative air humidity, when, on the contrary, their humidity gradually increases due to their hygroscopicity. Properties of solid biofuels change with their increasing humidity – their calorific value and consistency decreasing and the share of crumbles increasing.

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1413
Author(s):  
Elena Leoni ◽  
Manuela Mancini ◽  
Daniele Duca ◽  
Giuseppe Toscano

Near infrared spectroscopy is a non-invasive and rapid technique to support the analysis of solid biofuels such as woodchip, which is considered as a suitable alternative for energy production, according to European goals for fossil fuel reduction. Chemical and physical properties of the woodchip influence combustion performance, so the most discriminant parameters such as moisture and ash content and gross calorific value were constantly monitored. The aim of this study was the development of prediction models for these three parameters with the use of a hand-held NIR spectrometer. Laboratory analyses were carried out to evaluate the quality of several Italian samples from a power plant, and PLS regression models were developed to test prediction accuracy. Moreover, the most relevant wavelengths were investigated to discriminate chemical compounds influence. Prediction models demonstrated the capacity of handheld MicroNIR instrument to be considered a practical tool for solid biofuel quality assessment. As a consequence, NIR spectroscopy improved real-time analysis and made it suitable for practical and industrial applications, as supported by the recent Italian standard UNI/TS 11765.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 818 ◽  
Author(s):  
Krzysztof Mudryk ◽  
Marcin Jewiarz ◽  
Marek Wróbel ◽  
Marcin Niemiec ◽  
Arkadiusz Dyjakon

The paper presents the results of research aimed at evaluating the possibility of using selected tree leaf species to produce solid biofuels. The possibility of production of qualitative solid biofuels from urban tree leaves meets the expectations of the municipal sector. Collection of tree leaves in urban areas is very often necessary for road safety reasons, the need to collect biomass rich in dust and pollution as well as biomass infested with pests. The production of solid biofuels from tree leaves allows for effective management of this raw material with energy recovery. The performed research indicates such a possibility, and the obtained ash is used as a soil improver. The conducted research showed that the biomass of leaves of five tree species used in the experiment can be a source of raw materials for production of qualitative biofuels. The obtained pellets were characterized by properties comparable to those of classical wood pellets. The lower heating value of the obtained pellets ranged from 14.5 to 15.5 MJ∙kg−1. Physical properties of the obtained pellets described by bulk density (BD 600–660 kg∙m−3), mechanical durability (DU 90–96%), moisture (Mar 10–12.5%) indicate that these products can be used in existing combustion equipment. Preliminary analysis of the obtained ashes (determination of ash melting point, bulk density) indicates that they should not cause difficulties in ash removal systems from the combustion chamber.


2020 ◽  
Vol 12 (19) ◽  
pp. 8113
Author(s):  
Algirdas Jasinskas ◽  
Ramūnas Mieldažys ◽  
Eglė Jotautienė ◽  
Rolandas Domeika ◽  
Edvardas Vaiciukevičius ◽  
...  

The article analyses and evaluates the possibilities of using oak bark, oak leaves, and their mixtures for biofuel. The preparation of this waste for the burning process (milling, granulation) has been investigated and the results have been presented together with the analysis of the prepared granules’ properties—humidity, density, strength, elemental composition, ash content, caloric value, and others. The moisture content of the oak waste granules ranged from 8.1% to 12.5%, and the granules’ density ranged from 975.8 to 1122.2 kg m−3 DM (dry matter). The amount of oak ash found was very high (from 10.4% to 14.7%)—about 10 times higher than that of wood waste granules. The calorific value determined after burning the oak bark and leaves pellets was sufficiently high, ranging from 17.3 to 17.7 MJ kg−1. This thermal value of oak waste granules was close to the calorific value of the herbaceous plant species and some types of wood waste. The environmental impact of burning the granules of oak waste was also assessed. The harmful emissions of carbon monoxide and dioxide, nitrogen oxides, and unburnt hydrocarbons into the environment were found to be below the permissible limits for the incineration of oak waste granules. The highest CO gas concentration, determined when burning the oak leaves, was 1187.70 mg m−3, and the lowest NOx concentration, determined when burning the oak bark and leaf mixture granules, was 341.2 mg m−3. The coefficient of energy efficiency R of the granulated oak leaves biofuel, when the oak waste biomass moisture content was reduced by 10%, reached 3.64. It was very similar to the results of previous studies of various types of granulated straw biofuel (3.5–3.7). The research results presented show that, given that the main parameters of oak waste meet the basic requirements of solid biofuel, oak bark, leaves, and their mixture can be recommended to be used as solid biofuels.


2000 ◽  
Vol 25 (4) ◽  
pp. 329-330
Author(s):  
R.J.B. Hemler ◽  
G.H. Wieneke ◽  
P.H. Dejonckere

Author(s):  
R. S. Oliveira ◽  
K. B. A. Pimentel ◽  
M. L. Moura ◽  
C. F. Aragão ◽  
A. S. Guimarães-e-Silva ◽  
...  

Abstract Cutaneous leishmaniasis (CL) is a neglected tropical disease with a wide distribution in the Americas. Brazil is an endemic country and present cases in all states. This study aimed to describe the occurrence, the underlying clinical and epidemiological factors, and the correlation of climatic variables with the frequency of reported CL cases in the municipality of Caxias, state of Maranhão, Brazil. This is a retrospective and descriptive epidemiological study based on data extracted from the Brazilian Information System of Diseases Notification, from 2007 to 2017. Maximum and minimum temperature, precipitation, and relative air humidity data were provided by the Brazilian National Institute of Meteorology. A total of 201 reported autochthonous CL cases were analyzed. The predominance of cases was observed in males (70.1%). The age range between 31 and 60 years old was the most affected, with 96 cases (47.9%). Of the total number of registered cases, 38.8% of the affected individuals were engaged in agriculture-related activities. The georeferenced distribution revealed the heterogeneity of disease occurrence, with cases concentrated in the Western and Southern regions of the municipality. An association was detected between relative air humidity (monthly mean) and the number of CL cases per month (p = 0.04). CL continues to be a concerning public health issue in Caxias. In this context, there is a pressing need to strengthen measures of prevention and control of the disease through the network of health services of the municipality, considering local and regional particularities.


2018 ◽  
Vol 2 (1) ◽  
pp. 43
Author(s):  
Suwignyo Suwignyo ◽  
Abdul Rachim ◽  
Arizal Sapitri

Ice is a water that cooled below 0 °C and used for complement in drink. Ice can be found almost everywhere, including in the Wahid Hasyim Sempaja Roadside. From the preliminary test, obtained 5 samples ice cube were contaminated by Escherichia coli. The purpose of this study was to determine relationship between hygiene and sanitation with presence of Eschericia coli in ice cube of home industry at Wahid Hasyim Roadside Samarinda. This research used quantitative with survey methode. The population in this study was all of the seller in 2nd Wahid Hasyim Roadside. Sample was taken by Krejcie and Morgan so the there were 44 samples and used Cluster Random Sampling. The instruments are questionnaries, observation and laboratory test. Data analysis was carried out univariate and bivariate (using Fisher test p= 0.05). The conclusion of this study there are a relation between chosing raw material (p=0,03) and saving raw material (p=0,03) with presence of Eschericia coli. There was no relation between processing raw material into ice cube with presence of Eschericia coli (p=0,15).Advice that can be given to ice cube should maintain hygiene and sanitation of the selection, processing and storage of ice cube.


Sign in / Sign up

Export Citation Format

Share Document