scholarly journals Selection index for bulls of Holstein cattle in the Czech Republic

2011 ◽  
Vol 49 (No. 6) ◽  
pp. 244-256 ◽  
Author(s):  
J. Přibyl ◽  
P. Šafus ◽  
M. Štípková ◽  
L. Stádník ◽  
V. Čermák
Keyword(s):  
Selection Index ◽  
Body Measurements ◽  
Production Traits ◽  
Linear Classification ◽  
The Czech Republic ◽  
Breeding Objective ◽  
Body Conformation ◽  
Milk Performance ◽  
Source Of Information

Complex selection indexes are proposed for bulls of Holstein cattle in the Czech Republic. Partial breeding values for milk performance, fertility and body conformation are combined in the index. Conformation is expressed either by linear classification or by general characteristics and body measurements. Variants according to the traits included in breeding objective and in performance recordingwere tested – breeding objective comprised milk, meat, milkability, health, reproduction, longevity; production traits and linear classification of body conformation or production traits and general characteristics of body conformation and/or production traits, and general characteristics of body conformation and body measurements were used as source of information (in performancerecording). For practical use is recommended the variant of reduced selection index where milkability, health and meat performance were left out from breeding objective, and production traits and linear classification of body conformation were employed as a source of information. The index guarantees 69.30% reliability of breeding value estimate and the ratio of selection effects for milk, meat and secondary traits 78 : 8 : 14. The respective importance of milk performance in total (breeding values for milk and components) of reproduction and linear body classification as sources of information in the index are 79.61%, 15.52% and 4.86%.  

Reducing methane emissions by including methane production or feed intake in genetic selection programmes for Suffolk sheep

2013 ◽  
Vol 151 (6) ◽  
pp. 872-888 ◽  
Author(s):  
D. J. COTTLE ◽  
J. CONINGTON
Keyword(s):  
Feed Intake ◽  
Selective Breeding ◽  
Deterministic Model ◽  
Selection Index ◽  
Farming Systems ◽  
Carbon Price ◽  
Breeding Systems ◽  
Production Traits ◽  
Breeding Objective ◽  
Feed Costs

SUMMARYThe use of selective breeding to reduce methane (CH4) emissions is an option for reducing carbon emissions from livestock farming systems. The current study models UK lowland terminal sire (meat) sheep production systems to study the impacts of including CH4 emissions and/or feed intake as breeding objective and selection criteria traits in sheep breeding systems, on the predicted genetic responses of production traits. Nine breeding goal traits and 15 selection index traits were modelled in a Suffolk breeding flock with a deterministic model of trait economic values (EVs). Methane was given an EV equivalent to a carbon price varying from £0 to £538/t CO2-e. When currently used selection indices added feed intake as a breeding objective, CH4 reductions of 0·15 and 0·05 kg CO2-e/sheep/year were predicted when intake was, or was not, measured, respectively, with a zero carbon price. These reductions were relatively insensitive to carbon price. Overall economic (index) response to selection was insensitive to carbon price and increased with higher feed costs, when neither CH4 nor feed intake was measured. When CH4 and/or intake were measured, overall economic responses increased with higher carbon prices, when feed costs were zero. Methane and intake responses were only sensitive to carbon price (whether CH4 and intake were measured or not) when feed costs were zero. To achieve a desired reduction of 0·1 kg CH4/head/year (cumulative 30% reduction in 20 years) when feed costs were zero, CH4 and/or intake needed to be measured. If CH4 was measured, carbon price needed to be >£50/t CO2-e; if intake was measured carbon price needed to be >£100/t CO2-e. Including feed intake as a breeding objective trait with non-zero feed costs should assist in reducing CH4 in breeding programmes. Selective breeding of terminal sheep by index selection has the potential to contribute a reduction of up to 0·27 kg CO2-e per ewe per annum, depending on the traits measured, feed costs and carbon price. This would help meet the UK Government's greenhouse gas reduction targets for farming systems.

scholarly journals Experiences in selecting on a total merit index in the Austrian fleckvieh breed

2006 ◽  
Vol 22 (1-2) ◽  
pp. 17-27 ◽  
Author(s):  
J. Miesenberger ◽  
C. Fuerst
Keyword(s):  
Selection Index ◽  
Cattle Breed ◽  
International Exchange ◽  
Production Traits ◽  
Economic Gain ◽  
Milk Traits ◽  
Breeding Values ◽  
Breeding Objective ◽  
Economic Weights ◽  
Estimated Breeding Values

Spotted cattle breed is the most common breed in Austria. Austrian Spotted cattle breed is bred as a dual purpose breed for more than 100 years. The breeding objective has changed over the time according to the different economic importance of the traits and according to the different possibilities in using estimated breeding values (EBVs) for selection. Since 1998 the breeding objective is defined as the aggregate genotype of production traits and functional traits. All economically important traits are combined according to their economic weights in the total merit index (TMI). The TMI is calculated by combining the EBVs of all traits using a selection index procedure. The index weights (b-values) are estimated depending on the reliabilities of the EBVs and are therefore different from animal to animal. Considering the intensive international exchange of semen from the best bulls, the cooperation in the breeding programs and the similar economic situation in agriculture the breeding organizations of Germany and Austria decided to make a joint across-country evaluation for all traits. Since November 2002 breeding values for all traits and as a logical conclusion the TMI are evaluated jointly. The result is a high acceptance of the EBVs and the TMI by the farmers because of smaller changes of the breeding values for national and foreign bulls between consecutive evaluations. The realized economic gain in the different traits is very close to the expected economic gain. In the last 10 years on average 88.2 % of the economic gain were realized in the milk traits, 4.2 % in the beef traits and 7.6 % were realized in the fitness traits.

A terminal sire selection index for UK beef cattle

1998 ◽  
Vol 67 (3) ◽  
pp. 445-454 ◽  
Author(s):  
P. R. Amer ◽  
R. Crump ◽  
G. Simm
Keyword(s):  
Beef Cattle ◽  
Selection Index ◽  
Mass Selection ◽  
Gestation Length ◽  
Production Traits ◽  
Breeding Objective ◽  
Estimated Breeding Values ◽  
Genetic Regression ◽  
Calving Difficulty ◽  
Calving Traits

AbstractA selection index which incorporates estimated breeding values of traits recorded in the United Kingdom pedigree beef cattle breeds is described. The breeding objective is made up of commercial carcass, calving difficulty and gestation length traits. Economic values for these breeding objective traits are summarized from related studies, while partial genetic regression estimates of breeding objective traits on recorded traits are derived mainly from the literature.The selection index is described in terms of the reduction in expected genetic response from selection on the index when individual recorded traits are omitted and the expected genetic responses in breeding objective traits with selection on the index under the assumption of mass selection. Failure to record all calving traits (birth weight, calving difficulty and gestation length) resulted in a reduction in expected economic response to selection of 8% from the situation where both calving traits and production traits (400-day weight, ultrasonic fat and muscle depths, and muscling score) are recorded. With a few stated exceptions, the index is relatively robust to errors in estimates of individual parameters.It is suggested that the total index be used to assist commercial bull and semen buyers in their selection decisions but that two sub-indices for calving and production traits also be published to allow buyers to adjust emphasis on the two groups of traits depending on their individual production circumstances.

scholarly journals Sub-indexes for bulls ofHolsteinbreed in theCzechRepublic

2011 ◽  
Vol 50 (No. 6) ◽  
pp. 254-265 ◽  
Author(s):  
P. Šafus ◽  
M. Štípková ◽  
L. Stádník ◽  
J. Přibyl ◽  
V. Čermák
Keyword(s):  
Selection Index ◽  
Milk Proteins ◽  
Production Traits ◽  
Linear Type ◽  
Breeding Values ◽  
Production Index ◽  
Holstein Breed ◽  
Total Index ◽  
Milk Performance ◽  
Available Information

Sub-indexes were constructed for bulls of the Holstein breed according to groups of production traits – production index for milk (IPH), sub-indexes for reproduction (IRH), longevity (IDH), health resistance (IOH) and fitness (IFH). Every index for selection for a group of traits applies all available information – breeding values for traits of milk performance, fertility and linear type trait classification. The sub-indexes were compared with the total index (SIH). The accuracy of total selection index (SIH) was 69.30%, the accuracies of the other indexes were as follows: IPH 83.32%, IRH 56.04%, IDH 9.80%, IOH 15.57% and IFH 9.86%. All of the indexes were standardised to have the mean 100 and standard deviation 12. Simplified index ZSIH was developed as a sum of IPH, IRH and IDH; its correlation with the total index is r = 0.992. If IPH is used, the values of secondary functional traits decrease. The use of IDH, IOH and IFH results in a decrease in milk performance. Selection differences, i.e. changes in breeding values at various intensities of selection according to some indexes and breeding values for kg of milk and kg of milk proteins, were tested on the basis of breeding values in a sample of the domestic population of bulls. The production index was compared with production indexes used in other countries. Correlations between production indexes were higher than r = 0.790.  

scholarly journals Characteristics of Morphological Parameters of Donkeys in the Czech Republic

2015 ◽  
Vol 63 (2) ◽  
pp. 419-424 ◽  
Author(s):  
Martina Kosťuková ◽  
Hana Černohorská ◽  
Iveta Bihuncová ◽  
Ivana Oravcová ◽  
Eva Sobotková ◽  
...  
Keyword(s):  
Czech Republic ◽  
Multiple Comparisons ◽  
General Linear Model ◽  
Morphological Parameters ◽  
Body Measurements ◽  
The Czech Republic ◽  
Sample Group ◽  
Body Conformation ◽  
Significant Difference ◽  
Age Factor

The donkey population in Central Europe and Czech Republic is very variation, which is a consequence of the donkeys originating from various areas of Europe. This has been proved to affect their body conformation. In this work, we are focusing on the population of donkeys in the Czech Republic and its analysis.The main aim of our work was to determine the values morphological parameters in the donkey population in the Czech Republic. Altogether, 23 body dimensions were taken and further processed to calculate 6 hippo metric indexes. The sample group we analyzed consisted by a total of 70 individuals, out of there were 23 stallions and 47 mares. The results were then processed using the methods of general linear model (GLM) and multiple comparisons.We managed to prove a statistically significant influence of the sex factor for the following body measurements: shin length of the front limbs, chest width, withers height measured by tape, shin circumference on both front and pelvic limbs and also for weight index. Also, we have found a statistically significant difference in the scapula length when considering the age factor.

Classifying Countries within the Transitional Justice Typology

2017 ◽  
Author(s):  
Cynthia M. Horne
Keyword(s):  
Transitional Justice ◽  
Truth Commissions ◽  
Public Disclosure ◽  
Employment Change ◽  
The Czech Republic ◽  
File Access ◽  
Independent Variable ◽  
Public Disclosures

Chapter 2 explores each of the country cases in this project, namely the Czech Republic, Slovakia, Hungary, Poland, Romania, Bulgaria, Estonia, Latvia, Lithuania, Russia, Ukraine, and Albania. The chapter provides historical details of the transitional justice reforms in all twelve countries from 1989–2013, covering lustration, file access, public disclosures, and truth commissions. This material is then used to place each country case within the typology developed in Chapter 1, according to whether the measures were expansive and included compulsory employment change, limited and included largely voluntary employment change, informal and largely symbolic, or actively rejected. The chapter provides variable conceptualization and operationalization specifics to be used in the subsequent statistical analyses, including three different lustration variables, a truth commission variable, and timing of reform variables. It provides qualitative, comparative historical details to justify the classification of countries according to the primary independent variable, namely lustration and public disclosure programs.

The incorporation of fertility indices in genetic improvement programmes

2001 ◽  
Vol 26 (1) ◽  
pp. 237-249 ◽  
Author(s):  
J.E. Pryce ◽  
R.F. Veerkamp
Keyword(s):  
Genetic Variance ◽  
Selection Index ◽  
Genetic Correlations ◽  
Live Weight ◽  
Parameter Estimates ◽  
Phenotypic Variance ◽  
Production Traits ◽  
Genetic Progress ◽  
Detection Rates ◽  
Days Open

AbstractIn recent years there has been considerable genetic progress in milk production. Yet, increases in yield have been accompanied by an apparent lengthening of calving intervals, days open, days to first heat and a decline in conception rates, which appears to be both at the genetic and phenotypic level. Fertility has a high relative economic value compared to production traits such as protein, making it attractive to include in a breeding programme. To do this there needs to be genetic variance in fertility. Measures of fertility calculated from service dates have a small genetic compared to phenotypic variance, hence heritability estimates are small, typically less than 5%, although coefficients of genetic variance are comparable to those of production traits. Heritabilities of commencement of luteal activity determined using progesterone profiles are generally higher, and have been reported as being from 0.16 to 0.28, which could be because of a more precise quantification of genetic variance, as management influences such as delaying insemination and heat detection rates are excluded. However, it might not be the use of progesterone profiles alone, as days to first heat observed by farm staff has a heritability of 0.15. The most efficient way to breed for improved fertility is to construct a selection index using the genetic and phenotypic parameter estimates of all traits of interest in addition to their respective economic values. Index traits for fertility could include measures such as calving interval, days open, days to first service, or days to first heat but there may also be alternative measures. Examples include traits related to energy balance, such as live weight and condition score (change), both of which have higher heritabilities than fertility measures and have genetic correlations of sufficient magnitude to make genetic progress by using them feasible. To redress the balance between fertility and production, some countries already publish genetic evaluations of fertility including: Denmark, Finland, France, Germany, Israel, The Netherlands, Norway and Sweden.

scholarly journals Claw health and feed efficiency as new selection criteria in the Czech Holstein cattle Krupová Z., Wolfová M., Krupa E., Přibyl J., Zavadilová L.

2018 ◽  
Vol 63 (No. 10) ◽  
pp. 408-418 ◽  
Author(s):  
Z. Krupová ◽  
M. Wolfová ◽  
E. Krupa ◽  
J. Přibyl ◽  
L. Zavadilová
Keyword(s):  
Feed Intake ◽  
Feed Efficiency ◽  
Disease Incidence ◽  
Selection Index ◽  
Residual Feed Intake ◽  
Selection Response ◽  
Holstein Cattle ◽  
Breeding Objective ◽  
Economic Weights ◽  
The Impact

The objective of this study was to calculate economic weights for ten current breeding objective traits and for four new traits characterising claw health and feed efficiency in Czech Holstein cattle and to investigate the impact of different selection indices on the genetic responses for these traits. Economic weights were estimated using a bio-economic model, while applying actual (2017) and predicted (2025) production and economic circumstances. For the actual situation, the economic weights of claw disease incidence were –100.1 € per case, and those of daily residual feed intake in cows, breeding heifers, and fattened animals were –79.37, –37.16, and –6.33 €/kg dry matter intake per day, respectively. In the predicted situation, the marginal economic weights for claw disease and feed efficiency traits increased on average by 38% and 20%, respectively. The new traits, claw disease incidence and daily residual feed intake, were gradually added to the 17 current Holstein selection index traits to improve the new traits. Constructing a comprehensive index with 21 traits and applying the general principles of the selection index theory, a favourable annual genetic selection response was obtained for the new traits (–0.008 cases of claw disease incidence and –0.006 kg of daily residual feed intake across all cattle categories), keeping the annual selection response of the most important current breeding objective traits at a satisfactory level (e.g., 73 kg of milk yield per lactation, 0.016% of milk fat). Claw health and feed efficiency should be defined as new breeding objectives and new selection index traits of local dairy population.

scholarly journals Protein phenotypes and productive traits in Landrace, Large White and Duroc swine

1995 ◽  
Vol 25 (1) ◽  
pp. 61-65 ◽  
Author(s):  
Claudia Helena Tagliaro ◽  
Maria Helena Lartigau Pereira Franco ◽  
Werner Meincke ◽  
Gilberto Silva
Keyword(s):  
Weight Gain ◽  
Selection Index ◽  
Daily Weight Gain ◽  
Production Traits ◽  
Southern Brazil ◽  
Feed Conversion ◽  
Large White ◽  
Performance Variables ◽  
Phosphogluconate Dehydrogenase ◽  
Productive Traits

Fourteen protein systems coded by 15 structural loci were typed by horizontal electrophoresis to determine possible associations betweem the protein phenotypes and productive traits in Landrace (N=109), Largo White (N= 116) and Duroe (N=57) pigs, reared in Southern Brazil. Signiticant associations between protein phenotypes and production traits were detected. The most consistent interaction were observed between two protein systems (phosphogluconate dehydrogenase - Pgd and Hemopexin -Hpx) and at least one of the four performance variables considered. In Duroc breed, the Pgd phenotypes were associated with daily weight gain (P < 0.01), feed conversion ratio (P < 0.01) and selection index (P < 0.001), while in Landrace significant associations were observed only with feed convertion ratio (P < 0.05). The Hpx phenotypes were associated with daily weight gain (P < 0.05) and backfat thickness (P < 0.05) in Large White and with this last variable (P < 0.01) and selection index (P < 0.05) in Duroc pigs. Since these results had not been reported previously, turther studies are need to confirm these associations.

scholarly journals How Marketing Instruments Affect Consumer Behavior in Times of Economic Turbulence

2014 ◽  
Vol 62 (6) ◽  
pp. 1257-1263 ◽  
Author(s):  
Naďa Birčiaková ◽  
Jana Stávková ◽  
Martin Souček
Keyword(s):  
Decision Making ◽  
Consumer Behavior ◽  
Wilcoxon Test ◽  
Individual Factors ◽  
The Czech Republic ◽  
Income Levels ◽  
Level Of Education ◽  
Brand Quality ◽  
Radial Graphs

This article analyzes the behavioural changes in groups of consumers and households on the market with individual commodities, based on the classification of individual reasonable consumption. Consumers expressed the degree of influence in their decision-making on satisfying their needs through selected key marketing factors such as price, brand, quality, habits and experience, advertising, recommendation from friends and relatives, packaging, discounts, new items, and so on. The analysis sought to determine whether the changes in the economic situation in the Czech Republic have an impact on the degree of marketing instrument influence on consumer behavior and decision-making. To express the degree of influence 10 point opinion scale is used. Thanks to the investigation taking place in 2007 with 609 respondents and in 2013 with 516 respondents, it was possible, it was possible to deal with the search for evidence of differences in the importance of individual factors using the Wilcoxon test. In 2013, attention was also paid to the degree of influence of some marketing tools such as price, quality and discount events on consumer behavior and decision-making in selected groups of households created by different income levels and different level of education achieved by the head of the household. The influence is expressed by radial graphs.

Sign in / Sign up

Export Citation Format

Share Document