scholarly journals Non-destructive determination of nitrogen fixing activity in upland plants and fields by acetylene reduction technique.

1984 ◽  
Vol 53 (4) ◽  
pp. 450-454 ◽  
Author(s):  
Shigekata YOSHIDA
Keyword(s):  
Acetylene Reduction ◽  
Reduction Technique ◽  
Nitrogen Fixing ◽  
Non Destructive

A Survey of Asymbiotic Nitrogen Fixation in the Rhizosphere of Weeds

Weed Science ◽  
1978 ◽  
Vol 26 (2) ◽  
pp. 148-150 ◽  
Author(s):  
A. R. Conklin ◽  
P. K. Biswas
Keyword(s):  
Thin Film ◽  
Nitrogen Fixation ◽  
Acetylene Reduction ◽  
Rhizosphere Soil ◽  
Soil Samples ◽  
Reduction Technique ◽  
Nitrogen Fixing ◽  
Weed Species ◽  
Nitrogen Fixing Bacteria ◽  
Asymbiotic Nitrogen Fixation

The occurrence of asymbiotic nitrogen fixing bacteria in the rhizosphere of twenty weed species has been investigated. Using the roll tube method root-rhizosphere soil samples were diluted and added to test tubes containing low N media. Tubes were flushed with nitrogen, stoppered, and rolled to form a thin film of media on the inner wall. After 7 days incubation the nitrogen fixation rates were estimated using the acetylene reduction technique. Rates ranged from 38 to 783 nmoles acetylene reduced per hour. Of twenty species tested, three showed high rhizosphere populations of asymbiotic nitrogen fixing bacteria.

Stoichiometric Determination of Graphite Intercalation Compounds Using Rutherford Backscatiering Spectrometry

1983 ◽  
Vol 27 ◽  
Author(s):  
L. Salamanca-Riba ◽  
B.S. Elman ◽  
M.S. Dresselhaus ◽  
T. Venkatesan
Keyword(s):  
Experimental Error ◽  
Rutherford Backscattering Spectrometry ◽  
Rutherford Backscattering ◽  
Intercalation Compounds ◽  
Graphite Intercalation Compounds ◽  
X Ray ◽  
Donor And Acceptor ◽  
Graphite Intercalation ◽  
Non Destructive

ABSTRACTRutherford backscattering spectrometry (RBS) is used to characterize the stoichiometry of graphite intercalation compounds (GIC). Specific application is made to several stages of different donor and acceptor compounds and to commensurate and incommensurate intercalants. A deviation from the theoretical stoichiometry is measured for most of the compounds using this non-destructive method. Within experimental error, the RBS results agree with those obtained from analysis of the (00ℓ) x-ray diffractograms and weight uptake measurements on the same samples.

Application of EDS Technique for OSP Film Thickness Measurement

2006 ◽  
Author(s):  
Prong Kongsubto ◽  
Sirarat Kongwudthiti
Keyword(s):  
Thin Film ◽  
Quantitative Analysis ◽  
Joint Strength ◽  
Critical Factor ◽  
Thickness Measurement ◽  
Ic Manufacturing ◽  
And Control ◽  
Film Thickness Measurement ◽  
Non Destructive

Abstract Organic solderability preservatives (OSPs) pad is one of the pad finishing technologies where Cu pad is coated with a thin film of an organic material to protect Cu from oxidation during storage and many processes in IC manufacturing. Thickness of OSP film is a critical factor that we have to consider and control in order to achieve desirable joint strength. Until now, no non-destructive technique has been proposed to measure OSP thickness on substrate. This paper reports about the development of EDS technique for estimating OSP thickness, starting with determination of the EDS parameter followed by establishing the correlation between C/Cu ratio and OSP thickness and, finally, evaluating the accuracy of the EDS technique for OSP thickness measurement. EDS quantitative analysis was proved that it can be utilized for OSP thickness estimation.

scholarly journals Non-Destructive Micromagnetic Determination of Hardness and Case Hardening Depth Using Linear Regression Analysis and Artificial Neural Networks

Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 18
Author(s):  
Rahel Jedamski ◽  
Jérémy Epp
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Regression Analysis ◽  
Artificial Neural Networks ◽  
Linear Regression ◽  
Linear Regression Analysis ◽  
Case Hardening ◽  
Artificial Neural ◽  
Non Destructive

Non-destructive determination of workpiece properties after heat treatment is of great interest in the context of quality control in production but also for prevention of damage in subsequent grinding process. Micromagnetic methods offer good possibilities, but must first be calibrated with reference analyses on known states. This work compares the accuracy and reliability of different calibration methods for non-destructive evaluation of carburizing depth and surface hardness of carburized steel. Linear regression analysis is used in comparison with new methods based on artificial neural networks. The comparison shows a slight advantage of neural network method and potential for further optimization of both approaches. The quality of the results can be influenced, among others, by the number of teaching steps for the neural network, whereas more teaching steps does not always lead to an improvement of accuracy for conditions not included in the initial calibration.

Characterization and Control of Copper CMP with Optoacoustic Metrology

2001 ◽  
Vol 671 ◽  
Author(s):  
Michael Gostein ◽  
Paul Lefevre ◽  
Alex A. Maznev ◽  
Michael Joffe
Keyword(s):  
Film Thickness ◽  
Spatial Resolution ◽  
Chemical Mechanical Polishing ◽  
High Spatial Resolution ◽  
Mechanical Polishing ◽  
Length Measurement ◽  
And Control ◽  
Non Destructive

ABSTRACTWe discuss applications of optoacoustic film thickness metrology for characterization of copper chemical-mechanical polishing (CMP). We highlight areas where the use of optoacoustics for CMP characterization provides data complementary to that obtained by other techniques because of its ability to directly measure film thickness with high spatial resolution in a rapid, non-destructive manner. Examples considered include determination of planarization length, measurement of film thickness at intermediate stages of polish, and measurement of arrays of metal lines.

Sign in / Sign up

Export Citation Format

Share Document