A brief commentary on activated carbon material as an efficient low-cost material for water decontamination

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 122
Author(s):  
Renwei Lu ◽  
Xiaolong Ren ◽  
Chong Wang ◽  
Changzhen Zhan ◽  
Ding Nan ◽  
...  

Lithium-ion hybrid capacitors (LICs) are regarded as one of the most promising next generation energy storage devices. Commercial activated carbon materials with low cost and excellent cycling stability are widely used as cathode materials for LICs, however, their low energy density remains a significant challenge for the practical applications of LICs. Herein, Na0.76V6O15 nanobelts (NaVO) were prepared and combined with commercial activated carbon YP50D to form hybrid cathode materials. Credit to the synergism of its capacitive effect and diffusion-controlled faradaic effect, NaVO/C hybrid cathode displays both superior cyclability and enhanced capacity. LICs were assembled with the as-prepared NaVO/C hybrid cathode and artificial graphite anode which was pre-lithiated. Furthermore, 10-NaVO/C//AG LIC delivers a high energy density of 118.9 Wh kg−1 at a power density of 220.6 W kg−1 and retains 43.7 Wh kg−1 even at a high power density of 21,793.0 W kg−1. The LIC can also maintain long-term cycling stability with capacitance retention of approximately 70% after 5000 cycles at 1 A g−1. Accordingly, hybrid cathodes composed of commercial activated carbon and a small amount of high energy battery-type materials are expected to be a candidate for low-cost advanced LICs with both high energy density and power density.


2017 ◽  
Vol 98 ◽  
pp. 189-195 ◽  
Author(s):  
Bin Zhou ◽  
Zhanghong Wang ◽  
Dekui Shen ◽  
Fei Shen ◽  
Chunfei Wu ◽  
...  

Fermentation ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 119
Author(s):  
Vasiliki Summerson ◽  
Claudia Gonzalez Viejo ◽  
Damir D. Torrico ◽  
Alexis Pang ◽  
Sigfredo Fuentes

The incidence and intensity of bushfires is increasing due to climate change, resulting in a greater risk of smoke taint development in wine. In this study, smoke-tainted and non-smoke-tainted wines were subjected to treatments using activated carbon with/without the addition of a cleaving enzyme treatment to hydrolyze glycoconjugates. Chemical measurements and volatile aroma compounds were assessed for each treatment, with the two smoke taint amelioration treatments exhibiting lower mean values for volatile aroma compounds exhibiting positive ‘fruit’ aromas. Furthermore, a low-cost electronic nose (e-nose) was used to assess the wines. A machine learning model based on artificial neural networks (ANN) was developed using the e-nose outputs from the unsmoked control wine, unsmoked wine with activated carbon treatment, unsmoked wine with a cleaving enzyme plus activated carbon treatment, and smoke-tainted control wine samples as inputs to classify the wines according to the smoke taint amelioration treatment. The model displayed a high overall accuracy of 98% in classifying the e-nose readings, illustrating it may be a rapid, cost-effective tool for winemakers to assess the effectiveness of smoke taint amelioration treatment by activated carbon with/without the use of a cleaving enzyme. Furthermore, the use of a cleaving enzyme coupled with activated carbon was found to be effective in ameliorating smoke taint in wine and may help delay the resurgence of smoke aromas in wine following the aging and hydrolysis of glycoconjugates.


2015 ◽  
Vol 659 ◽  
pp. 304-309
Author(s):  
Khemmakorn Gomonsirisuk ◽  
Thanakorn Wasanapiarnpong

Organic contaminated wastes water from petrochemical industries can be removed by adsorbent and photocatalyst. In this work, the degradation rate of phenol have been studied at different ratios of activated carbon/NaA zeolite composite materials coated with TiO2 photocatalyst which are easily to be fabricated into tubular shape by extrusion method. In addition, the foam-inserted composite can be floated on the surface of waste water for the higher phocatalyst activity. While the composite is the low cost adsorbent with high absorption and high ion exchange properties. In order to optimize the efficiency of material, the various ratios of activated carbon/NaA zeolite (3:1, 1:1 and 1:3) and amount of coated TiO2 on the specimen’s surface was studied by UV/Vis spectrophotometer which related to phenol concentration. Moreover the various amount of phenolic resins (10, 20, 30, 40 and 50 wt%) at different reduction firing temperatures (600 and 650 °C) with soaking time of 1, 2 and 3 hours affected to the compressive strength of samples. For the characterization, XRD is used to characterize the phase and SEM is used to provide the morphology of the prepared composite materials.


2017 ◽  
Vol 51 (18) ◽  
pp. 10913-10922 ◽  
Author(s):  
Leland R. Widger ◽  
Megan Combs ◽  
Amit R. Lohe ◽  
Cameron A. Lippert ◽  
Jesse G. Thompson ◽  
...  

2019 ◽  
Vol 41 (6) ◽  
pp. 946-946
Author(s):  
Zhengliang Qi Zhengliang Qi ◽  
Junmei Liu Junmei Liu ◽  
Wanwan Guo and Jun Huang Wanwan Guo and Jun Huang

The N-doped carbon material supported Fe catalysts were developed for the oxidation of C-H bond of hydrocarbons to ketones and alcohols. The supported Fe catalysts were prepared by pyrolysis of [CMIM]3Fe(CN)6 ionic liquid in activated carbon. And the Fe(Ⅲ)@CN-600 showed good activity and high selectivity for the oxidation of alfa C-H bond of alkylbenzenes. The isolated Fe(Ⅲ) iron active sites should be responsible for the high activity and selectivity for the oxidation of hydrocarbons to ketones. Several ketones were obtained in good to excellent yields. Moreover, cyclohexanone can also be obtained through the oxidation of cyclohexane.


2014 ◽  
Vol 9 (1) ◽  
pp. 166-174 ◽  
Author(s):  
Rajeshwar M. Shrestha ◽  
Margit Varga ◽  
Imre Varga ◽  
Amar P. Yadav ◽  
Bhadra P. Pokharel ◽  
...  

Activated carbons were prepared from Lapsi seed stone by the treatment with H2SO4 and HNO3 for the removal of Ni (II) ions from aqueous solution. Two activated carbon have been prepared from Lapsi seed stones by treating with conc.H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of Ni(II) ions. Chemical characterization of the resultant activated carbons was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxyl, lactones and phenols in the carbons. The optimum pH for nickel adsorption is found to be 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Ni (II) on the resultant activated carbons was 28.25.8 mg g-1 with H2SO4 and 69.49 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Ni (II) from water. DOI: http://dx.doi.org/10.3126/jie.v9i1.10680Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 166–174


2017 ◽  
Vol 4 (3) ◽  
pp. 4599-4602 ◽  
Author(s):  
Anar Zhexembekova ◽  
Nuriya Akhmetova ◽  
Anara Molkenova ◽  
Zhumabay Bakenov ◽  
Danny O'Hare

Sign in / Sign up

Export Citation Format

Share Document