scholarly journals Acrylic Panels Applications as Building Materials and Daylighting Devices

2020 ◽  
Vol 7 (2) ◽  
pp. 258-272
Author(s):  
Rawan AlQudah ◽  
◽  
Ahmed Freewan ◽  
Keyword(s):  
Total Internal Reflection ◽  
Building Materials ◽  
Physical Models ◽  
Natural Light ◽  
Glass Panel ◽  
Design Variables ◽  
Acrylic Glass ◽  
Glass Panels ◽  
Real Size

Enormous studies have been conducted to enhance the daylighting utilization in buildings either by direct lighting techniques, lighting reflection systems, lighting transporting systems, or by light tracking systems. The current research aims at evaluating acrylic panels as a light transmitting medium and studying their possible applications to bring natural light to inner spaces due to the lack of researches on acrylic sheets. Acrylic panels utilize the total internal reflection phenomena to convey the light for long distances. The research depended on real experiments and real measurements by using physical models with real dimensions. Many design variables had been studied like thickness, length, orientations and surroundings materials. The long-term measurements showed that acrylic panels could transmit light 8 times greater than the glass sheets, and the thickness of 20 mm for the acrylic glass panel, 30 cm collector length, 20cm diffuser length, with a steel surrounding on both sides show a great potential to transmit light up to 3493.3 lux at the diffuser during the peak hours in summer. While the results of the real size daylighting chamber show that the acrylic glass could transmit light up to 580 lux during the peak hours in summer. The study showed that the number and the distribution of acrylic glass panels in the space depend on the needed illuminance task levels. Moreover, the acrylic glass panels could be easily integrated with building materials in walls and roofs.

Translucent Glass Roofs For Large-Span Coverings

2019 ◽  
pp. 23-28
Keyword(s):  
Warm Season ◽  
Natural Light ◽  
Labor Costs ◽  
Main Bearing ◽  
Large Span ◽  
Glass Panels ◽  
Technical Properties ◽  
Internal Volume ◽  
Basic Approaches ◽  
Smoke Removal

The article deals with the issues of glass use in the enclosing structures of large-span coverings, which have such advantages as ensuring the penetration of natural light, tightness, minimum labor costs for repair and maintenance. Design shortcomings: the high cost, the need for protection of the internal volume against the penetrating sun rays in the warm season (hothouse effect); arrangement of devices for operation of a roof. The key technical properties and characteristics of glass panels and pane-glass sets, constructive decisions, including interface to the main bearing structures of a large-span covering are given. Peculiarities of their design with due regard for ventilation and smoke removal, a drainage of condensate, ways of fight against frosting and snow drifts on the roof are reflected. Features of the account of loadings, the basic approaches to their calculation are considered. Various design solutions for the spatial metal trussed systems with the original nodal connections are presented. Information on modern solutions of translucent roofs using glass for large-span coverings is given.

scholarly journals Application of Plastic Wastes in Construction Materials: A Review Using the Concept of Life-Cycle Assessment in the Context of Recent Research for Future Perspectives

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3549
Author(s):  
Tulane Rodrigues da Silva ◽  
Afonso Rangel Garcez de Azevedo ◽  
Daiane Cecchin ◽  
Markssuel Teixeira Marvila ◽  
Mugahed Amran ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Solid Waste ◽  
Building Materials ◽  
Construction Materials ◽  
Plastic Waste ◽  
Plastic Wastes ◽  
Solid Waste Generation ◽  
Alternative Processes

The urbanization process contributes to the growth of solid waste generation and causes an increase in environmental impacts and failures in the management of solid waste. The number of dumps is a concern due to the limited implementation and safe disposal of this waste. The interest in sustainable techniques has been growing in relation to waste management, which is largely absorbed by the civil construction sector. This work aimed to review plastic waste, especially polyethylene terephthalate (PET), that can be incorporated with construction materials, such as concrete, mortars, asphalt mixtures, and paving. The use of life-cycle assessment (LCA) is related, as a tool that allows the sustainability of products and processes to be enhanced in the long term. After analyzing the recent literature, it was identified that studies related to plastic wastes in construction materials concentrate sustainability around the alternative destination of waste. Since the plastic waste from different production chains are obtained, it was possible to affirm the need for a broader assessment, such as the LCA, providing greater quantification of data making the alternative processes and products more sustainable. The study contributes to enhance sustainability in alternative building materials through LCA.

Insight on the results of three different correlation analyses between satellite TIR anomalies and earthquake occurrence

2021 ◽  
Author(s):  
Carolina Filizzola ◽  
Roberto Colonna ◽  
Alexander Eleftheriou ◽  
Nicola Genzano ◽  
Katsumi Hattori ◽  
...  
Keyword(s):  
Seismic Hazard ◽  
International Workshop ◽  
Statistical Correlation ◽  
Physical Models ◽  
Short Term ◽  
Correlation Analyses ◽  
Multi Temporal ◽  
Casual Relation ◽  
Large Earthquakes

<p>In order to evaluate the potentiality of the parameter “RST-based satellite TIR anomalies” in relation with earthquake (M≥4) occurrence, in recent years we performed three long-term statistical correlation analyses on different seismically active areas, such as Greece (Eleftheriou et al., 2016), Italy (Genzano et al., 2020), and Japan (Genzano et al., 2021).</p><p>With this aim, by means of the RST (Robust Satellite Techniques; Tramutoli, 1998, 2007) approach we analysed ten-year time series of satellite images collected by the SEVIRI sensor (on board the MSG platforms) over Greece (2004-2013) and Italy (2004-2014), and by the JAMI and IMAGER sensors (on board the MTSAT satellites) over Japan (2005-2015).  By applying empirical spatial-temporal rules, which are established also taking account of the physical models up to now proposed to explain seismic TIR anomaly appearances, the performed long -term correlation analyses put in relief that a non-casual relation exists between satellite TIR anomalies and the occurrence of earthquakes.</p><p>At the same time, in the carried out studies we introduced and validated refinements and improvements to the RST approach, which are able to minimize the proliferation of the false positives (i.e. TIR anomalies independent from the seismic sources, but due to other causes such as meteorological factors).    </p><p>Here, we summarize the achieved results and discuss them from the perspective of a multi-parameter system, which could improve our present knowledge on the earthquake-related processes and increase our capacity to assess the seismic hazard in the medium-short term (months to days).</p><p> </p><p>References</p><p>Eleftheriou, A., C. Filizzola, N. Genzano, T. Lacava, M. Lisi, R. Paciello, N. Pergola, F. Vallianatos, and V. Tramutoli (2016), Long-Term RST Analysis of Anomalous TIR Sequences in Relation with Earthquakes Occurred in Greece in the Period 2004–2013, Pure Appl. Geophys., 173(1), 285–303, doi:10.1007/s00024-015-1116-8.</p><p>Genzano, N., C. Filizzola, M. Lisi, N. Pergola, and V. Tramutoli (2020), Toward the development of a multi parametric system for a short-term assessment of the seismic hazard in Italy, Ann. Geophys, 63, 5, PA550, doi:10.4401/ag-8227.</p><p>Genzano, N., C. Filizzola, K. Hattori, N. Pergola, and V. Tramutoli (2021), Statistical correlation analysis between thermal infrared anomalies observed from MTSATs and large earthquakes occurred in Japan (2005 - 2015), Journal of Geophysics Research – Solid Earth, doi: 10.1029/2020JB020108 (accepted).</p><p>Tramutoli, V. (1998), Robust AVHRR Techniques (RAT) for Environmental Monitoring: theory and applications, in Proceedings of SPIE, vol. 3496, edited by E. Zilioli, pp. 101–113, doi: 10.1117/12.332714</p><p>Tramutoli, V. (2007), Robust Satellite Techniques (RST) for Natural and Environmental Hazards Monitoring and Mitigation: Theory and Applications, in 2007 International Workshop on the Analysis of Multi-temporal Remote Sensing Images, pp. 1–6, IEEE. doi: 10.1109/MULTITEMP.2007.4293057</p>

scholarly journals Numerical Evaluation of Slender Glass Panel with Complex Geometry Subjected to Static Load and Soft-body Impact

2021 ◽  
Author(s):  
Marcin Kozłowski
Keyword(s):  
Static Load ◽  
Complex Geometry ◽  
Design Practice ◽  
Glass Panel ◽  
Soft Body ◽  
In Situ Experiments ◽  
Glass Panels ◽  
Current Standards

Current standards and glass codes of design practice require that glazing used in architectural applications has to be resistant to, in addition to typical loads, also accidental events, in particular human impact, without showing damage that is disproportionate to the original cause. A case study was performed of an indoor glass lantern in a public building made from slender two-side supported glass panels with a complex geometry (36 ventilation holes). The paper provides structural assessments and results of in-situ experiments including static loading and soft body impact. Results from numerical simulations of impact loading on the glass panels complementing the experimental results are also presented.

scholarly journals Design and Experiment of a Novel Façade Cleaning Robot with a Biped Mechanism

2018 ◽  
Vol 8 (12) ◽  
pp. 2398 ◽  
Author(s):  
Shunsuke Nansai ◽  
Keichi Onodera ◽  
Prabakaran Veerajagadheswar ◽  
Mohan Rajesh Elara ◽  
Masami Iwase
Keyword(s):  
Polynomial Interpolation ◽  
Area Coverage ◽  
Glass Panel ◽  
High Rise ◽  
Cleaning Robot ◽  
Glass Panels ◽  
Glass Facade ◽  
Cleaning Robots ◽  
Real Scenario ◽  
Glass Façade

Façade cleaning in high-rise buildings has always been considered a hazardous task when carried out by labor forces. Even though numerous studies have focused on the development of glass façade cleaning systems, the available technologies in this domain are limited and their performances are broadly affected by the frames that connect the glass panels. These frames generally act as a barrier for the glass façade cleaning robots to cross over from one glass panel to another, which leads to a performance degradation in terms of area coverage. We present a new class of façade cleaning robot with a biped mechanism that is able overcome these obstacles to maximize its area coverage. The developed robot uses active suction cups to adhere to glass walls and adopts mechanical linkage to navigate the glass surface to perform cleaning. This research addresses the design challenges in realizing the developed robot. Its control system consists of inverse kinematics, a fifth polynomial interpolation, and sequential control. Experiments were conducted in a real scenario, and the results indicate that the developed robot achieves significantly higher coverage performance by overcoming both negative and positive obstacles in a glass panel.

scholarly journals The economic and technological efciency of building producton in view of contemporary industrial building materials

2018 ◽  
Vol 196 ◽  
pp. 04074 ◽  
Author(s):  
Konstantin Tsapko
Keyword(s):  
Building Materials ◽  
Methodological Problem ◽  
Industrial Building ◽  
Risk And Uncertainty ◽  
Production Economic ◽  
Labor Resources ◽  
The Cost ◽  
Selection Of

Efficiency of construction production, economic category, expressing the achievement of construction and installation organizations the greatest result of production while minimizing the cost of material and labor resources. This publication examines the possibility of improving the efficiency of construction production through the use of innovative building materials and methods of their application. The methodological problem of the use of building materials, their choice depending on the long-term economic prospects. The questions of risk and uncertainty in the selection of effective building materials are considered.

Semi-automated operation of Mars Climate Simulation chamber – MCSC modelled for biological experiments

2016 ◽  
Vol 16 (4) ◽  
pp. 328-342
Author(s):  
M.V. Tarasashvili ◽  
Sh.A. Sabashvili ◽  
S.L. Tsereteli ◽  
N.D. Aleksidze ◽  
O. Dalakishvili
Keyword(s):  
Building Materials ◽  
Genetically Modified Organisms ◽  
Space Station ◽  
Climate Simulation ◽  
Term Operation ◽  
Space Suits ◽  
Atmosphere Temperature ◽  
Temperature Radiation ◽  
Simulation Chamber

AbstractThe Mars Climate Simulation Chamber (MCSC) (GEO PAT 12 522/01) is designed for the investigation of the possible past and present habitability of Mars, as well as for the solution of practical tasks necessary for the colonization and Terraformation of the Planet. There are specific tasks such as the experimental investigation of the biological parameters that allow many terrestrial organisms to adapt to the imitated Martian conditions: chemistry of the ground, atmosphere, temperature, radiation, etc. MCSC is set for the simulation of the conduction of various biological experiments, as well as the selection of extremophile microorganisms for the possible Settlement, Ecopoesis and/or Terraformation purposes and investigation of their physiological functions. For long-term purposes, it is possible to cultivate genetically modified organisms (e.g., plants) adapted to the Martian conditions for future Martian agriculture to sustain human Mars missions and permanent settlements. The size of the chamber allows preliminary testing of the functionality of space-station mini-models and personal protection devices such as space-suits, covering and building materials and other structures. The reliability of the experimental biotechnological materials can also be tested over a period of years. Complex and thorough research has been performed to acquire the most appropriate technical tools for the accurate engineering of the MCSC and precious programmed simulation of Martian environmental conditions. This paper describes the construction and technical details of the equipment of the MCSC, which allows its semi-automated, long-term operation.

Long-Term Sorption Properties of Mortars Modified by Crystallizing Admixture

2014 ◽  
Vol 1054 ◽  
pp. 71-74 ◽  
Author(s):  
Pavel Reiterman ◽  
Vít Bäumelt
Keyword(s):  
Transport Properties ◽  
Building Materials ◽  
Important Influence ◽  
Sorption Properties ◽  
Experimental Program

Paper is focused on the determination of sorption properties of mortars modified by sealing admixture. Ability of building materials to transport water has an important influence to other properties, predominantly durability. Realized experimental program introduces results of long-term measurements of transport properties presented by capillary absorbability.

scholarly journals Passive room conditioning using phase change materials—Demonstration of a long‐term real size experiment

2020 ◽  
Vol 44 (8) ◽  
pp. 7047-7056 ◽  
Author(s):  
Sebastian Sonnick ◽  
Lars Erlbeck ◽  
Maximilian Gaedtke ◽  
Frederik Wunder ◽  
Christoph Mayer ◽  
...  
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Real Size

scholarly journals Evaluation of New Applications of Oil Shale Ashes in Building Materials

Minerals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 765
Author(s):  
Mustafa Cem Usta ◽  
Can Rüstü Yörük ◽  
Tiina Hain ◽  
Peeter Paaver ◽  
Ruben Snellings ◽  
...  
Keyword(s):  
Oil Shale ◽  
Building Materials ◽  
Mineralogical Composition ◽  
Accelerated Carbonation ◽  
Zero Waste ◽  
Clay Bricks ◽  
Carbon Neutral ◽  
New Applications ◽  
Future Utilization

Achieving sustainable zero-waste and carbon neutral solutions that contribute to a circular economy is critically important for the long-term prosperity and continuity of traditional carbon-based energy industries. The Estonian oil shale (OS) sector is an example where such solutions are more than welcome. The combustion of OS generates a continuous flow of ashes destined to landfills. In this study, the technical feasibility of producing monolith building materials incorporating different OS ashes from Estonia was evaluated. Three binder systems were studied: self-cementation of the ashes, ceramic sintering in clay brick production and accelerated carbonation of OS ash (OSA) compacts. Results showed that most of the OSAs studied have low self-cementitious properties and these properties were affected by ash fineness and mineralogical composition. In case of clay bricks, OSA addition resulted in a higher porosity and improved insulation properties. The carbonated OSA compacts showed promising compressive strength. Accelerated carbonation of compacted samples was found to be the most promising way for the future utilization of OSAs as sustainable zero-waste and carbon neutral solution.

Sign in / Sign up

Export Citation Format

Share Document