A Study of Atomic Layer Deposition and Reactive Plasma Compatibilitywith Mesoporous Organosilicate Glass Films

2003 ◽  
Vol 766 ◽  
Author(s):  
E. Todd Ryan ◽  
Melissa Freeman ◽  
Lynne Svedberg ◽  
J.J. Lee ◽  
Todd Guenther ◽  
...  

AbstractThe compatibility of ALD and CVD metal deposition with mesoporous and microporous carbon-doped organosilicate glass (OSG) films was examined. Blanket film studies using TEM, TOF-SIMS, and positron lifetime spectroscopy demonstrate that ALD Wand TaN penetrate deep into the mesoporous film via the film's connected pore structure. In contrast, metal penetration into microporous OSG films was not observed. He and NH3 plasma pretreatments to the mesoporous OSG film surface did not seal the mesopores to ALD metal penetration, but the plasmas did damage the bulk of the mesoporous OSG film with varying severity. The results indicate that porosity, pore size, and/or pore structure regulate ALD/CVD precursor diffusion and that ALD metal deposition is a good probe of pore sealing strategies.

Author(s):  
Yoon Kyeung Lee ◽  
Chanyoung Yoo ◽  
Woohyun Kim ◽  
Jeongwoo Jeon ◽  
Cheol Seong Hwang

Atomic layer deposition (ALD) is a thin film growth technique that uses self-limiting, sequential reactions localized at the growing film surface. It guarantees exceptional conformality on high-aspect-ratio structures and controllability...


2018 ◽  
Vol 36 (2) ◽  
pp. 021509 ◽  
Author(s):  
Meiliang Wang ◽  
Haripin Chandra ◽  
Xinjian Lei ◽  
Anupama Mallikarjunan ◽  
Kirk Cuthill ◽  
...  

2006 ◽  
Vol 45 (21) ◽  
pp. 8480-8482 ◽  
Author(s):  
Kyung-Ho Park ◽  
Alexander Z. Bradley ◽  
Jeffery S. Thompson ◽  
Will J. Marshall

ACS Catalysis ◽  
2014 ◽  
Vol 4 (5) ◽  
pp. 1554-1557 ◽  
Author(s):  
Ana C. Alba-Rubio ◽  
Brandon J. O’Neill ◽  
Fengyuan Shi ◽  
Cem Akatay ◽  
Christian Canlas ◽  
...  

2006 ◽  
Vol 16 (41) ◽  
pp. 4029 ◽  
Author(s):  
Dusan Losic ◽  
Gerry Triani ◽  
Peter J. Evans ◽  
Armand Atanacio ◽  
James G. Mitchell ◽  
...  

Membranes ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 915
Author(s):  
Shuo Wang ◽  
Qinyu Shen ◽  
Chuanyan Guo ◽  
Hongge Guo

The polylactic acid (PLA) resin Ingeo 4032D was selected as the research object, with a focus on PLA modification by using polymers such as linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE) and ethylene–propylene-diene monomer grafted with glycidyl methacrylate (EPDM-g-GMA), by using fillers such as nano calcium carbonate and zeolite. In order to characterize the deposition effect of Al2O3 on the film surface by plasma-assisted atomic layer deposition, Bio-oriented PLA (BOPLA) with more uniform thickness than blown film was purchased for study. The mechanical properties, friction coefficient, surface contact angle and water vapour transmission rate of the modified PLA film were compared and discussed. The aim was to find out the most influencing factors of film’s water vapour resistance.


2014 ◽  
Vol 5 (1) ◽  
Author(s):  
Kwanpyo Kim ◽  
Han-Bo-Ram Lee ◽  
Richard W. Johnson ◽  
Jukka T. Tanskanen ◽  
Nan Liu ◽  
...  

2012 ◽  
Vol 397-398 ◽  
pp. 17-23 ◽  
Author(s):  
Fengbin Li ◽  
Yang Yang ◽  
Yiqun Fan ◽  
Weihong Xing ◽  
Yong Wang

Sign in / Sign up

Export Citation Format

Share Document