Photon and Ion Beam-Induced Chemistry of Palladium Acetate Films

1986 ◽  
Vol 75 ◽  
Author(s):  
M. E. Gross ◽  
W. L. Brown ◽  
J. Linnros ◽  
L. R. Harriott ◽  
K. D. Cummings ◽  
...  
Keyword(s):  
Continuous Wave ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Decomposition Reaction ◽  
Palladium Acetate ◽  
Metallic Silver ◽  
Electrically Conducting ◽  
Reaction Fronts ◽  
Explosive Reaction ◽  
Palladium Particles

AbstractElectrically conducting palladium features have been produced by laser and ion beam irradiation of thin palladium acetate films. The photothermal reaction induced by scanned continuous wave Ar+ laser irradiation leads to metal lines that may exhibit periodic structure. This results from repeated propagation of “explosive” reaction fronts generated by coupling of the heat from the absorbed laser radiation with the heat of the decomposition reaction of the film. In contrast, 2 MeV He+ ion irradiation produces smooth metallic-looking features that contain up to 20% of the original carbon and 5% of the original oxygen content of the film. Films irradiated with 2 MeV Ne+ ions contain slightly lower amounts of carbon and oxygen residues, but fully exposed thick films (0.90 μm) appear black rather than metallic silver. In addition to having significantly higher purity, the laser-written features have lower resistivities than the ion beam-irradiated features. Infrared spectroscopy of the ion beam-irradiated films as a function of dose indicates a progressive loss in intensity of the characteristics acetate (COO-) vibrations. This occurs at doses lower than those associated with major C and O loss from the films. Partially ion-exposed films continue to decompose to metallic-looking material over a period of weeks after irradiation. Metallic palladium particles apparently catalyze this process.

Electron and ion irradiation-induced dissolution of mechanical twins in the intermetalic U3Si: An in situ HVEM study

1989 ◽  
Vol 47 ◽  
pp. 652-653
Author(s):  
Charles W. Allen ◽  
Robert C. Birtcher
Keyword(s):  
Elevated Temperatures ◽  
Ion Irradiation ◽  
Ion Beam ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Heavy Ion ◽  
High Energy ◽  
Mechanical Twinning ◽  
In Situ Experiments

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.

scholarly journals Comparison of short-range order in irradiated dysprosium titanates

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Roman Sherrod ◽  
Eric C. O’Quinn ◽  
Igor M. Gussev ◽  
Cale Overstreet ◽  
Joerg Neuefeind ◽  
...  
Keyword(s):  
Long Range ◽  
Short Range ◽  
Structural Model ◽  
Ion Irradiation ◽  
Function Analysis ◽  
Ion Beam ◽  
Structural Response ◽  
Heavy Ion ◽  
Range Order ◽  
Radiation Resistant

AbstractThe structural response of Dy2TiO5 oxide under swift heavy ion irradiation (2.2 GeV Au ions) was studied over a range of structural length scales utilizing neutron total scattering experiments. Refinement of diffraction data confirms that the long-range orthorhombic structure is susceptible to ion beam-induced amorphization with limited crystalline fraction remaining after irradiation to 8 × 1012 ions/cm2. In contrast, the local atomic arrangement, examined through pair distribution function analysis, shows only subtle changes after irradiation and is still described best by the original orthorhombic structural model. A comparison to Dy2Ti2O7 pyrochlore oxide under the same irradiation conditions reveals a different behavior: while the dysprosium titanate pyrochlore is more radiation resistant over the long-range with smaller degree of amorphization as compared to Dy2TiO5, the former involves more local atomic rearrangements, best described by a pyrochlore-to-weberite-type transformation. These results highlight the importance of short-range and medium-range order analysis for a comprehensive description of radiation behavior.

SPUTTERING WITH GAS CLUSTER-ION BEAMS

1996 ◽  
Vol 03 (01) ◽  
pp. 1017-1021 ◽  
Author(s):  
J. MATSUO ◽  
M. AKIZUKI ◽  
J. NORTHBY ◽  
G.H. TAKAOKA ◽  
I. YAMADA
Keyword(s):  
Ion Irradiation ◽  
Removal Rate ◽  
Ion Beam ◽  
Solid Surfaces ◽  
Silicon Surfaces ◽  
Cluster Ions ◽  
Mass Filter ◽  
Cluster Bombardment ◽  
Cluster Ion Beams ◽  
Cluster Ion

A high-current (~100 nA) cluster-ion-beam equipment with a new mass filter has been developed to study the energetic cluster-bombardment effects on solid surfaces. A dramatic reduction of Cu concentration on silicon surfaces has been achieved by 20-keV Ar cluster (N~3000) ion bombardment. The removal rate of Cu with cluster ions is two orders of magnitude higher than that with monomer ions. A significantly higher sputtering yield is expected for cluster-ion irradiation. An energetic cluster-ion beam is quite suitable for removal of metal.

Growth of Cu-Oxide Protrusion by Ar Ion Irradiation

2007 ◽  
Vol 558-559 ◽  
pp. 1359-1362 ◽  
Author(s):  
Hiroyuki Tanaka ◽  
Shunichiro Tanaka
Keyword(s):  
Ion Irradiation ◽  
Ion Beam ◽  
Beam Irradiation ◽  
Ion Beam Irradiation ◽  
Residual Oxygen ◽  
Irradiation Angle ◽  
Oxygen Atoms

Cu2O conical micron-scale protrusions have been grown on a preoxidized Cu surface by the Ar ion beam irradiation at 9 kV for 5-20 min in the low vacuum. This Ar ion irradiation is based on the ‘Transcription Method’ which has been originated by B.-S. Xu and S.-I. Tanaka in 1996 to form nanoparticles. Ar ion irradiation induced needle-like nanostructures composed of Cu2O and CuO which were randomly nucleated on Cu surface by the oxidation at 623 K for 10 min in the air. The obtained Cu2O conical protrusions have a controllable length of up to 14.6 μm with diameter in the range of 0.8 μm by changing the Ar ion irradiation angle to the surface. The mechanism of the formation of the conical protrusions is proposed that Cu atoms on the Cu surface activated and sputtered by the Ar ion irradiation diffuse on the surface of needle-like oxide as nuclei along the Ar ion track and react with residual oxygen atoms to grow the conical Cu2O protrusions.

scholarly journals Effect of Ion Irradiation on Nanoindentation Fracture and Deformation in Silicon Carbide

JOM ◽  
2021 ◽  
Author(s):  
Alexander J. Leide ◽  
Richard I. Todd ◽  
David E. J. Armstrong
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Residual Stresses ◽  
Focused Ion Beam ◽  
Electron Backscatter Diffraction ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Resolution Electron ◽  
Radiation Induced ◽  
Compressive Residual Stresses

AbstractSilicon carbide is desirable for many nuclear applications, making it necessary to understand how it deforms after irradiation. Ion implantation combined with nanoindentation is commonly used to measure radiation-induced changes to mechanical properties; hardness and modulus can be calculated from load–displacement curves, and fracture toughness can be estimated from surface crack lengths. Further insight into indentation deformation and fracture is required to understand the observed changes to mechanical properties caused by irradiation. This paper investigates indentation deformation using high-resolution electron backscatter diffraction (HR-EBSD) and Raman spectroscopy. Significant differences exist after irradiation: fracture is suppressed by swelling-induced compressive residual stresses, and the plastically deformed region extends further from the indentation. During focused ion beam cross-sectioning, indentation cracks grow, and residual stresses are modified. The results clarify the mechanisms responsible for the modification of apparent hardness and apparent indentation toughness values caused by the compressive residual stresses in ion-implanted specimens.

Ion beam-mixing effects in nearly lattice-matched AlInN/GaN heterostructures by swift heavy ion irradiation

2012 ◽  
Vol 167 (7) ◽  
pp. 506-511 ◽  
Author(s):  
G. Devaraju ◽  
S. V.S. Nageswara Rao ◽  
N. Srinivasa Rao ◽  
V. Saikiran ◽  
T. K. Chan ◽  
...  
Keyword(s):  
Ion Irradiation ◽  
Ion Beam ◽  
Heavy Ion ◽  
Ion Beam Mixing ◽  
Swift Heavy Ion Irradiation ◽  
Heavy Ion Irradiation ◽  
Mixing Effects ◽  
Swift Heavy Ion ◽  
Lattice Matched

Study of scalable IBS nanopatterning mechanisms for III-V semiconductors using in-situ surface characterization

2011 ◽  
Vol 1354 ◽  
Author(s):  
Jean Paul Allain ◽  
Osman El-Atwani ◽  
Alex Cimaroli ◽  
Daniel L. Rokusek ◽  
Sami Ortoleva ◽  
...  
Keyword(s):  
Surface Chemistry ◽  
Surface Characterization ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Low Energy ◽  
Self Organization ◽  
Beam Parameter ◽  
Ion Beam Sputtering

ABSTRACTIon-beam sputtering (IBS) has been studied as a means for scalable, mask-less nanopatterning of surfaces. Patterning at the nanoscale has been achieved for numerous types of materials including: semiconductors, metals and insulators. Although much work has been focused on tailoring nanopatterning by systematic ion-beam parameter manipulation, limited work has addressed elucidating on the underlying mechanisms for self-organization of multi-component surfaces. In particular there has been little attention to correlate the surface chemistry variation during ion irradiation with the evolution of surface morphology and nanoscale self-organization. Moreover the role of surface impurities on patterning is not well known and characterization during the time-scale of modification remains challenging. This work summarizes an in-situ approach to characterize the evolution of surface chemistry during irradiation and its correlation to surface nanopatterning for a variety of multi-components surfaces. The work highlights the importance and role of surface impurities in nanopatterning of a surface during low-energy ion irradiation. In particular, it shows the importance of irradiation-driven mechanisms in GaSb(100) nanopatterning by low-energy ions and how the study of these systems can be impacted by oxide formation.

Spontaneous formation of nanometer-scale self-organized structures in Ag-Cu alloys under irradiation

2000 ◽  
Vol 647 ◽  
Author(s):  
Raúl A. Enrique ◽  
Pascal Bellon
Keyword(s):  
Ion Irradiation ◽  
Ion Beam ◽  
Solute Concentration ◽  
Irradiation Temperature ◽  
Nanometer Scale ◽  
Beam Irradiation ◽  
X Ray Diffraction ◽  
Ion Beam Irradiation ◽  
Self Organized ◽  
The One

AbstractIon-beam irradiation can be used as a processing tool to synthesize metastable materials. A particular case is the preparation of solid solutions from immiscible alloys, which have been achieved for a whole range of systems. In this process, enhanced solute concentration is obtained through the local mixing induced by each irradiation event, which if occurring at a high enough frequency, can outweigh demixing by thermal diffusion. The resulting microstructure forms in far from equilibrium conditions, and theoretical results for these kind of driven alloys have shown that novel microstructures exhibiting self-organization can develop. To test these predictions, we prepare Ag-Cu multilayered thin films that we subject to 1 MeV Kr+-ion irradiation at temperatures ranging from room temperature to 225 °C, and characterize the specimens by x-ray diffraction, TEM and STEM. We observe two different phenomena occurring at different length scales: On the one hand, regardless of the irradiation temperature, grains grow under irradiation until reaching a size limited by film thickness (~200 nm). On the other hand, the distribution of species inside the grains is greatly affected by the irradiation temperature. At intermediate temperatures, a semi-coherent decomposition is observed at a nanometer scale. This nanometer-scale decomposition phenomenon appears as an evidence of patterning, and thus confirms on the possibility of using ion-beam irradiation as a route to synthesize nanostructured materials with novel magnetic and optical properties.

scholarly journals Ion Irradiation-Induced Microstructural Evolution of Ni–Mo–Cr Low Alloy Steels

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2268
Author(s):  
Hongying Sun ◽  
Penghui Lei ◽  
Guang Ran ◽  
Hui Wang ◽  
Jiyun Zheng ◽  
...  
Keyword(s):  
Irradiation Dose ◽  
Focused Ion Beam ◽  
Ion Irradiation ◽  
Ion Beam ◽  
High Strength ◽  
Positron Annihilation Spectroscopy ◽  
Small Scale ◽  
Low Alloy Steels ◽  
Dislocation Loops ◽  
S Parameter

As leading candidates of sheet steels for advanced nuclear reactors, three types of Ni–Mo–Cr high-strength low alloy (HSLA) steels named as CNST1, CNST2 and CNSS3 were irradiated by 400 keV Fe+ with peak fluence to 1.4 × 1014, 3.5 × 1014 and 7.0 × 1014 ions/cm2, respectively. The distribution and morphology of the defects induced by the sample preparation method and Fe+ irradiation dose were investigated by transmission electron microscopy (TEM) and positron-annihilation spectroscopy (PAS). TEM samples were prepared with two methods, i.e., a focused ion beam (FIB) technique and the electroplating and twin-jet electropolishing (ETE) method. Point defects and dislocation loops were observed in CNST1, CNST2 and CNSS3 samples prepared via FIB. On the other hand, samples prepared via the ETE method revealed that a smaller number of defects was observed in CNST1, CNST2 and almost no defects were observed in CNST3. It is indicated that artifact defects could be introduced by FIB preparation. The PAS S-W plots showed that the existence of two types of defects after ion implantation included small-scale defects such as vacancies, vacancy clusters, dislocation loops and large-sized defects. The S parameter of irradiated steels showed a clear saturation in PAS response with increasing Fe+ dose. At the same irradiation dose, higher values of the S-parameter were achieved in CNST1 and CNST2 samples when compared to that in CNSS3 samples. The mechanism and evolution behavior of irradiation-induced defects were analyzed and discussed.

scholarly journals Fabrication of Nanopore in MoS2-Graphene vdW Heterostructure by Ion Beam Irradiation and the Mechanical Performance

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 196
Author(s):  
Xin Wu ◽  
Ruxue Yang ◽  
Xiyue Chen ◽  
Wei Liu
Keyword(s):  
Mechanical Performance ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Beam Irradiation ◽  
Ion Beam Irradiation ◽  
Stacking Order ◽  
Vdw Heterostructure ◽  
Nanopore Structure

Nanopore structure presents great application potential especially in the area of biosensing. The two-dimensional (2D) vdW heterostructure nanopore shows unique features, while research around its fabrication is very limited. This paper proposes for the first time the use of ion beam irradiation for creating nanopore structure in 2D vdW graphene-MoS2 heterostructures. The formation process of the heterostructure nanopore is discussed first. Then, the influence of ion irradiation parameters (ion energy and ion dose) is illustrated, based on which the optimal irradiation parameters are derived. In particular, the effect of stacking order of the heterostructure 2D layers on the induced phenomena and optimal parameters are taken into consideration. Finally, uniaxial tensile tests are conducted by taking the effect of irradiation parameters, nanopore size and stacking order into account to demonstrate the mechanical performance of the heterostructure for use under a loading condition. The results would be meaningful for expanding the applications of heterostructure nanopore structure, and can arouse more research interest in this area.

Sign in / Sign up

Export Citation Format

Share Document