Growth of 3C-SiC Layers on Silicon Substrates with a Novel Stress Relaxation Structure

2001 ◽  
Vol 680 ◽  
Author(s):  
Yoshihiro Irokawa ◽  
Noboru Yamada ◽  
Masahito Kodama ◽  
Tetsu Kachi
Keyword(s):  
Stress Relaxation ◽  
Defect Density ◽  
Chemical Vapor ◽  
Silicon Substrates ◽  
Heteroepitaxial Growth ◽  
Cross Sectional ◽  
Si Substrates ◽  
Micro Raman Spectroscopy ◽  
Pressure Chemical ◽  
Relaxation Structure

ABSTRACTSilicon (Si) substrates having cavities just beneath the surface layer (multi-cavity Si substrates) were examined whether they worked as the stress relaxation structure in 3C-SiC heteroepitaxial growth on Si. Single crystalline 3C-SiC layers were grown on the multi-cavity Si substrates by means of low pressure chemical vapor deposition (LPCVD). The layers' quality was characterized by the cross-sectional TEM observations and the Micro-Raman spectroscopy. The TEM results showed that this structure reduced the defect density in the 3C-SiC layers. The averaged full width at half-maximum (FWHM) of LO Raman mode in the 3C-SiC layerson the multi-cavity Si substrates became narrower than that on the conventional Si substrates. Furthermore, Schottky barrier structures showed that the reverse leakage current of the diodes using the multi-cavity Si substrates is smaller than that using the conventional Si substrates. These results indicate that the multi-cavity Si substrates are effective for stress relaxation in the 3C-SiC layers.

Heteroepitaxial Growth of 3C-SiC on Si (111) Substrate Using AlN as a Buffer Layer

2008 ◽  
Vol 600-603 ◽  
pp. 251-254 ◽  
Author(s):  
Yong Mei Zhao ◽  
Guo Sheng Sun ◽  
Xing Fang Liu ◽  
Jia Ye Li ◽  
Wan Shun Zhao ◽  
...  
Keyword(s):  
Buffer Layer ◽  
Chemical Vapor ◽  
Heteroepitaxial Growth ◽  
Si Substrate ◽  
Si Substrates ◽  
Good Crystallinity ◽  
Aln Film ◽  
Pressure Chemical ◽  
Aln Buffer ◽  
Sic Film

Using AlN as a buffer layer, 3C-SiC film has been grown on Si substrate by low pressure chemical vapor deposition (LPCVD). Firstly growth of AlN thin films on Si substrates under varied V/III ratios at 1100oC was investigated and the (002) preferred orientational growth with good crystallinity was obtained at the V/III ratio of 10000. Annealing at 1300oC indicated the surface morphology and crystallinity stability of AlN film. Secondly the 3C-SiC film was grown on Si substrate with AlN buffer layer. Compared to that without AlN buffer layer, the crystal quality of the 3C-SiC film was improved on the AlN/Si substrate, characterized by X-ray diffraction (XRD) and Raman measurements.

TEM and SEM Studies of MOCVD-Grown GaP on Si

1985 ◽  
Vol 62 ◽  
Author(s):  
M. M. Ai-Jassim ◽  
J. M. Olson ◽  
K. M. Jones
Keyword(s):  
Defect Density ◽  
Growth Parameters ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
Structural Defects ◽  
Organic Chemical ◽  
Cross Sectional ◽  
Plan View ◽  
Si Substrates ◽  
Antiphase Domains

ABSTRACTGaP and GaP/GaAsP epitaxial layers have been grown on Si substrates by metal-organic chemical vapor deposition (MOCVD). These layers were characterized by SEM and TEM plan-view and cross-sectional examination. At growth temperatures ranging from 600° C to 800° C, the initial stages of growth were dominated by three-dimensional nucleation. TEM studies showed that at high temperatures the nuclei were generally misoriented with respect to each other yielding, upon coalescence, polycrystalline layers. The growth of single-crystal layers was achieved by nucleating a 30–50 nm layer of GaP at 500° C, followed by annealing and continued growth at 750 ° C. The defect density in these structures was investigated as a function of various growth parameters and substrate conditions. A high density of structural defects was generated at the Si/GaP interface. The use of 2° off (100) Si substrates resulted in GaP layers free of antiphase domains. These results and their implications are discussed.

Low Temperature Lateral Epitaxial Growth of Silicon Carbide on Silicon

2000 ◽  
Vol 622 ◽  
Author(s):  
Chacko Jacob ◽  
Juyong Chung ◽  
Moon-Hi Hong ◽  
Pirouz Pirouz ◽  
Shigehiro Nishino
Keyword(s):  
Epitaxial Growth ◽  
Growth Temperature ◽  
Atmospheric Pressure ◽  
Defect Density ◽  
Chemical Vapor ◽  
High Growth ◽  
Heteroepitaxial Growth ◽  
Oxide Degradation ◽  
Pressure Chemical ◽  
Continued Use

ABSTRACTTo reduce the defect density inherent in conventional heteroepitaxial growth of SiC on Si, selective epitaxy followed by lateral epitaxial growth was performed in a conventional atmospheric pressure chemical vapor deposition (APCVD) system. The source gas was primarily hexamethyldisilane (HMDS). Hydrogen was used as the carrier gas and small amounts of hydrogen chloride (HCl) were added to improve the selectivity. Si(001) wafers, with an oxide layer (∼ 700 nm thick) as a mask, were used as substrates. The grown films were analyzed using optical microscopy and scanning electron microscopy (SEM). In earlier work, we had demonstrated the problems associated with the application of this technique – viz., oxide degradation and high growth temperature. Using HMDS, the growth temperature has been considerably reduced allowing the continued use of an oxide mask. Selective growth was demonstrated in films grown at 1250° and below.

Characteristics of SiC Heteroepitaxial Growth on Si by Hot-Mesh Chemical Vapor Deposition

2006 ◽  
Vol 11-12 ◽  
pp. 265-268
Author(s):  
T. Kurimoto ◽  
Yuichiro Kuroki ◽  
Kanji Yasui ◽  
Masasuke Takata ◽  
Tadashi Akahane
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Film Growth ◽  
Substrate Surface ◽  
Chemical Vapor ◽  
Heteroepitaxial Growth ◽  
Cross Sectional ◽  
Optical Absorbance ◽  
Si Substrates ◽  
Hydrogen Radicals

The heteroepitaxial growth of 3C-SiC films on Si(100) substrates by the hot-mesh chemical vapor deposition (HM-CVD) method using monomethylsilane as a source gas was investigated. From the results of X-ray diffraction spectra, 3C-SiC crystal was epitaxially grown on Si substrates at substrate temperatures above 750°C. The SiC/Si interface was observed by cross-sectional scanning electron microscopy, and was confirmed to be void-free and smooth. The density of hydrogen radicals supplied to the substrate surface during the growth was also estimated measuring the optical absorbance change of tungsten phosphate glass plates. From the dependence of the growth rate on substrate temperature, the mechanism of SiC film growth by HM-CVD was considered.

Growth of Si1−xGex, Strained Layers Using Atmospheric-Pressure CVD

1991 ◽  
Vol 220 ◽  
Author(s):  
F. Namavar ◽  
J. M. Manke ◽  
E. P. Kvam ◽  
M. M. Sanfacon ◽  
C. H. Perry ◽  
...  
Keyword(s):  
Atmospheric Pressure ◽  
Defect Density ◽  
Chemical Vapor ◽  
Good Growth ◽  
X Ray Diffraction ◽  
Strained Layers ◽  
Dislocation Glide ◽  
Transmission Electron ◽  
Pressure Chemical ◽  
Film Defect

ABSTRACTThe objective of this paper is to demonstrate the epitaxial growth of SiGe strained layers using atmospheric-pressure chemical vapor deposition (APCVD). We have grown SiGe layers with various thicknesses and Ge concentrations at temperatures ranging from 800–1000°C. The samples were studied using a variety of methods, including transmission electron microscopy (TEM), high resolution X-ray diffraction (HRXRD) and Raman spectroscopy (RS). Both HRXRD and RS results indicate that samples with about 10% Ge and a thickness of about 1000 Å are almost fully strained. TEM analyses of these samples indicate a film defect density less than 105/cm2. SIMS results indicate that the oxygen concentration in the epitaxial layers is lower than that found in CZ substrates.Our analyses also indicate that as-grown epitaxial Ge layers several microns thick have a defect density less than 107/cm2. The relatively low defect density in both SiGe and Ge layers grown on Si has been attributed to far higher dislocation glide velocity at the relatively elevated growth temperatures employed in CVD and to very good growth cleanliness.

Direct Deposition Reactions Between Nickel and Silicon Substrates

1993 ◽  
Vol 311 ◽  
Author(s):  
Lin Zhang ◽  
Douglas G. Ivey
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Silicon Substrates ◽  
Silicide Formation ◽  
Cross Sectional ◽  
Deposition Rates ◽  
Plan View ◽  
X Ray ◽  
Si Substrates ◽  
Transmission Electron

ABSTRACTSilicide formation through deposition of Ni onto hot Si substrates has been investigated. Ni was deposited onto <100> oriented Si wafers, which were heated up to 300°C, by e-beam evaporation under a vacuum of <2x10-6 Torr. The deposition rates were varied from 0.1 nm/s to 6 nm/s. The samples were then examined by both cross sectional and plan view transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy and electron diffraction. The experimental results are discussed in terms of a new kinetic model.

Fabrication and electrochemical characterization of super-capacitor based on three-dimensional composite structure of graphene and a vertical array of carbon nanotubes

2018 ◽  
Vol 52 (22) ◽  
pp. 3039-3044 ◽  
Author(s):  
Daniel Choi ◽  
Eui-Hyeok Yang ◽  
Waqas Gill ◽  
Aaron Berndt ◽  
Jung-Rae Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Vapor Deposition ◽  
Composite Structure ◽  
Graphene Layer ◽  
Three Dimensional ◽  
Chemical Vapor ◽  
Deposition Process ◽  
Silicon Substrates ◽  
Vertical Array ◽  
Pressure Chemical

We have demonstrated a three-dimensional composite structure of graphene and carbon nanotubes as electrodes for super-capacitors. The goal of this study is to fabricate and test the vertically grown carbon nanotubes on the graphene layer acting as a spacer to avoid self-aggregation of the graphene layers while realizing high active surface area for high energy density, specific capacitance, and power density. A vertical array of carbon nanotubes on silicon substrates was grown by a low-pressure chemical vapor deposition process using anodized aluminum oxide nanoporous template fabricated on silicon substrates. Subsequently, a graphene layer was grown by another low-pressure chemical vapor deposition process on top of a vertical array of carbon nanotubes. The Raman spectra confirmed the successful growth of carbon nanotubes followed by the growth of high-quality graphene. The average measured capacitance of the three-dimensional composite structure of graphene-carbon nanotube was 780 µFcm−2 at 100 mVs−1.

Variable Angle Spectroscopic Ellipsometric Characterization of Polycrystalline Silicon thin Film Multilayer Structures

1991 ◽  
Vol 238 ◽  
Author(s):  
Paul G. Snyder ◽  
Yi-Ming Xiong ◽  
John A. Woollam ◽  
Eric R. Krosche
Keyword(s):  
Polycrystalline Silicon ◽  
Composite Layer ◽  
Chemical Vapor ◽  
Silicon Thin Film ◽  
Cross Sectional ◽  
Additional Information ◽  
Variable Angle ◽  
Transmission Electron ◽  
Pressure Chemical ◽  
Annealing Effects

ABSTRACTVariable angle spectroscopie ellipsometry (VASE), a nondestructive optical technique, was used to characterize two different multilayer samples, each having a low-pressure chemical vapor deposited polycrystalline silicon (poly-Si) layer. Analysis of these samples by cross-sectional transmission electron microscopy (XTEM) revealed large changes in grain size, between the undoped, as-deposited, and doped, annealed poly-Si layers. Roughness at the top of the poly-Si layers was also observed by XTEM. These features, together with the other structure parameters (thickness and composition), were analyzed ellipsometrically by fitting the measured VASE spectra with appropriate multilayer models. Each composite layer (surface overlayer, interfacial layer, and poly-Si layer) was modeled as a physical mixture, using the Bruggeman effective medium approximation. The ellipsometrically determined thicknesses were in very good agreement with the corresponding results measured by XTEM. Furthermore, VASE analysis provided additional information about the relative fractions of the constituent materials in the different composite layers. Thus, it quantitatively characterized the surface and interracial properties, and also the doping and annealing effects on the microstructure of poly-Si layers.

Sign in / Sign up

Export Citation Format

Share Document