The Growth of GaAs on Si by Molecular Beam Epitaxy

1986 ◽  
Vol 67 ◽  
Author(s):  
S. M. Koch ◽  
S. J. Rosner ◽  
Darrell Schlom ◽  
J. S. Harris
Keyword(s):  
Growth Temperature ◽  
Molecular Beam ◽  
High Energy ◽  
Buffer Layers ◽  
Initial Growth ◽  
Photoluminescence Intensity ◽  
Ion Channeling ◽  
Gaas On Si

ABSTRACTSuccessful growth of GaAs on Si has recently been demonstrated. This work is directed toward an understanding of the processes occurring during the growth and their effects on the quality of the GaAs epilayers. Reflection High Energy Electron Diffraction monitoring of the growth in situ shows that the islands that are initially formed coalesce into an epilayer with a 2×4 surface reconstruction. Ion channeling indicates that the crystallinity of the entire epilayer improves with coverage. Substantial reordering of the material occurs when buffer layers grown at low temperatures are annealed at 575°C before and during further growth at this temperature. Comparison of 300 nm layers differing in the growth temperature of the first 100 nm shows no variation in the crystallinity as determined by ion channeling. Surface morphology degrades, however, and 77K photoluminescence intensity rises with the initial growth temperature. The optical and structural properties of 2μm thick films are also discussed.

Microstructure of thin layers of MBE-grown GaAs on Si substrates

1986 ◽  
Vol 67 ◽  
Author(s):  
S. J. Rosner ◽  
S. M. Koch ◽  
J. S. Harris ◽  
S. Laderman
Keyword(s):  
Structural Evolution ◽  
Normal Growth ◽  
Optical Quality ◽  
Thin Layers ◽  
Buffer Layers ◽  
Initial Growth ◽  
Slow Growth Rate ◽  
Si Substrates ◽  
Ion Channeling

ABSTRACTThe ability to grow high quality epitaxial GaAs films directly on Si substrates has recently been demonstrated by Molecular Beam Epitaxy. Many of the most successful growth techniques include initial growth at low temperatures and slow growth rate to nucleate the compound on the elemental semiconductor with subsequent normal growth under conditions used for homoepitaxial GaAs MBE. The mechanisms for the success of this method are still poorly understood. This work focusses on a study of the structural evolution of this low temperature initial layer and conventionally grown overlayer. Thin films in the 5 to 300 nm range were used to evaluate the effect of the temperature and thickness on the growth process. Thicker films, described elsewhere, were used to evaluate the crystalline and optical quality of potential device layers.The structure of the thin buffer layers was studied as a function of both temperature and thickness. The crystalline quality of these layers was found to be quite poor, with substantial disorder at the GaAs/Si interface. The quality improved slowly as a function of thickness. The effect of the conventional overgrowth on this initil layer was also investigated. It was found that the quality of the low tumperature layer improved as normal overgrowth continued, as measured by ion channeling aligned yields. After 200 nm of overgrowth, ion channeling aligned yields from the material at the interface had declined substantially. This indicates that substantial regrowth and annealing of defects occurs as growth continues. These observations are further confirmed by TEM.

MBE Growth of Ferroelectric YMnO3 Thin Films on Si(111) Using Y2O3 Buffer Layers

1998 ◽  
Vol 541 ◽  
Author(s):  
Shogo Imada ◽  
Shigeto Shouriki ◽  
Eisuke Tokumitsu ◽  
Hiroshi Ishiwara
Keyword(s):  
Thin Films ◽  
Molecular Beam ◽  
Ferroelectric Properties ◽  
High Energy ◽  
Buffer Layers ◽  
Mbe Growth ◽  
Rocking Curve ◽  
X Ray ◽  
Si Substrates

AbstractA ferroelectric YMnO3 thin films are grown on Si (111) substrates using Y2O3 buffer layers by molecular beam epitaxy (MBE). In-situ reflection high-energy electron diffraction (RHEED) analyses show that both Y2O3 and YMnO3 films are epitaxially grown on Si substrates. X-ray rocking curve measurements also show that the best FWHM (full width at half maximum) values for Y2O3 and YMnO3 films are 0.40° and 0.8°, respectively. C-V characteristics of Al/YMnO3/Y2O3/Si structures indicate the ferroelectric properties of YMnO3 films with a memory window of 0.7V.

Epitaxial growth manner and structure of superconducting oxide films

1990 ◽  
Vol 48 (4) ◽  
pp. 2-3
Author(s):  
Yoshichika Bando ◽  
Takahito Terashima ◽  
Kenji Iijima ◽  
Kazunuki Yamamoto ◽  
Kazuto Hirata ◽  
...  
Keyword(s):  
Ultrathin Films ◽  
Film Surface ◽  
High Energy ◽  
Epitaxial Films ◽  
Layer By Layer ◽  
Initial Growth ◽  
In Situ Growth ◽  
High Quality ◽  
Activated Reactive Evaporation

The high quality thin films of high-Tc superconducting oxide are necessary for elucidating the superconducting mechanism and for device application. The recent trend in the preparation of high-Tc films has been toward “in-situ” growth of the superconducting phase at relatively low temperatures. The purpose of “in-situ” growth is to attain surface smoothness suitable for fabricating film devices but also to obtain high quality film. We present the investigation on the initial growth manner of YBCO by in-situ reflective high energy electron diffraction (RHEED) technique and on the structural and superconducting properties of the resulting ultrathin films below 100Å. The epitaxial films have been grown on (100) plane of MgO and SrTiO, heated below 650°C by activated reactive evaporation. The in-situ RHEED observation and the intensity measurement was carried out during deposition of YBCO on the substrate at 650°C. The deposition rate was 0.8Å/s. Fig. 1 shows the RHEED patterns at every stage of deposition of YBCO on MgO(100). All the patterns exhibit the sharp streaks, indicating that the film surface is atomically smooth and the growth manner is layer-by-layer.

scholarly journals Investigation of the Heteroepitaxial Process Optimization of Ge Layers on Si (001) by RPCVD

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 928
Author(s):  
Yong Du ◽  
Zhenzhen Kong ◽  
Muhammet Toprak ◽  
Guilei Wang ◽  
Yuanhao Miao ◽  
...  
Keyword(s):  
High Temperature ◽  
Buffer Layer ◽  
Layer Thickness ◽  
Growth Temperature ◽  
Crystalline Quality ◽  
Initial Growth ◽  
Two Dimensional ◽  
High Quality ◽  
Reduced Pressure

This work presents the growth of high-quality Ge epilayers on Si (001) substrates using a reduced pressure chemical vapor deposition (RPCVD) chamber. Based on the initial nucleation, a low temperature high temperature (LT-HT) two-step approach, we systematically investigate the nucleation time and surface topography, influence of a LT-Ge buffer layer thickness, a HT-Ge growth temperature, layer thickness, and high temperature thermal treatment on the morphological and crystalline quality of the Ge epilayers. It is also a unique study in the initial growth of Ge epitaxy; the start point of the experiments includes Stranski–Krastanov mode in which the Ge wet layer is initially formed and later the growth is developed to form nuclides. Afterwards, a two-dimensional Ge layer is formed from the coalescing of the nuclides. The evolution of the strain from the beginning stage of the growth up to the full Ge layer has been investigated. Material characterization results show that Ge epilayer with 400 nm LT-Ge buffer layer features at least the root mean square (RMS) value and it’s threading dislocation density (TDD) decreases by a factor of 2. In view of the 400 nm LT-Ge buffer layer, the 1000 nm Ge epilayer with HT-Ge growth temperature of 650 °C showed the best material quality, which is conducive to the merging of the crystals into a connected structure eventually forming a continuous and two-dimensional film. After increasing the thickness of Ge layer from 900 nm to 2000 nm, Ge surface roughness decreased first and then increased slowly (the RMS value for 1400 nm Ge layer was 0.81 nm). Finally, a high-temperature annealing process was carried out and high-quality Ge layer was obtained (TDD=2.78 × 107 cm−2). In addition, room temperature strong photoluminescence (PL) peak intensity and narrow full width at half maximum (11 meV) spectra further confirm the high crystalline quality of the Ge layer manufactured by this optimized process. This work highlights the inducing, increasing, and relaxing of the strain in the Ge buffer and the signature of the defect formation.

A Study on the Growth of Cubic GaN Films Using an AlGaAs Buffer Layer Grown on GaAs (100) by Plasma-Assisted Molecular Beam Epitaxy

2000 ◽  
Vol 639 ◽  
Author(s):  
Ryuhei Kimura ◽  
Kiyoshi Takahashi ◽  
H. T. Grahn
Keyword(s):  
Molecular Beam Epitaxy ◽  
Buffer Layer ◽  
Molecular Beam ◽  
High Energy ◽  
Rf Plasma ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cubic Gan

ABSTRACTAn investigation of the growth mechanism for RF-plasma assisted molecular beam epitaxy of cubic GaN films using a nitrided AlGaAs buffer layer was carried out by in-situ reflection high energy electron diffraction (RHEED) and high resolution X-ray diffraction (HRXRD). It was found that hexagonal GaN nuclei grow on (1, 1, 1) facets during nitridation of the AlGaAs buffer layer, but a highly pure, cubic-phase GaN epilayer was grown on the nitrided AlGaAs buffer layer.

The Influence of Growth Temperature on Oxygen Concentration in GaN Buffer Layer

2008 ◽  
Vol 1068 ◽  
Author(s):  
Ewa Dumiszewska ◽  
Wlodek Strupinski ◽  
Piotr Caban ◽  
Marek Wesolowski ◽  
Dariusz Lenkiewicz ◽  
...  
Keyword(s):  
High Temperature ◽  
Buffer Layer ◽  
Oxygen Concentration ◽  
Growth Temperature ◽  
Low Temperatures ◽  
Buffer Layers ◽  
Crystalline Quality ◽  
Temperature Growth ◽  
Gan Buffer Layer

ABSTRACTThe influence of growth temperature on oxygen incorporation into GaN epitaxial layers was studied. GaN layers deposited at low temperatures were characterized by much higher oxygen concentration than those deposited at high temperature typically used for epitaxial growth. GaN buffer layers (HT GaN) about 1 μm thick were deposited on GaN nucleation layers (NL) with various thicknesses. The influence of NL thickness on crystalline quality and oxygen concentration of HT GaN layers were studied using RBS and SIMS. With increasing thickness of NL the crystalline quality of GaN buffer layers deteriorates and the oxygen concentration increases. It was observed that oxygen atoms incorporated at low temperature in NL diffuse into GaN buffer layer during high temperature growth as a consequence GaN NL is the source for unintentional oxygen doping.

GROWTH AND CHARACTERIZATION OF EPITAXIAL Si/CoSi2 AND Si/CoSi2/Si HETEROSTRUCTURES

1985 ◽  
Vol 56 ◽  
Author(s):  
B.D. HUNT ◽  
N. LEWIS ◽  
E.L. HALL ◽  
L.G. JTURNER ◽  
L.J. SCHOWALTER ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Growth Temperature ◽  
Molecular Beam ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Cross Sectional ◽  
Reactive Deposition ◽  
Ion Channeling ◽  
Formation Method

AbstractThin (<200Å), epitaxial CoSi2 films have been grown on (111) Siwafers in a UHV system using a variety of growth techniques including solid phase epitaxy (SPE), reactive deposition epitaxy (RDE), and molecular beam epitaxy (MBE). SEN and TEN studies reveal significant variations in the epitaxial silicide surface morphology as a function of the sillciqd formation method. Pinhole densities are generally greater than 107 cm-2, although some reduction can be achieved by utilizing proper growth techniques. Si epilayers were deposited over the CoSi2 films inthe temperature range from 550ºC to 800ºC, and the reesuulttinng structures have been characterized using SEM, cross—sectional TEN, and ion channeling measurements. These measurements show that the Si epitaxial quality increases with growth temperature, although the average Si surface roughness and the CoSi2 pinhole density also increase as the growth temperature is raised.

Effects of morphology of buffer layers on ZnO/sapphire heteroepitaxial growth by RF magnetron sputtering

2015 ◽  
Vol 1741 ◽  
Author(s):  
Tomoaki Ide ◽  
Koichi Matsushima ◽  
Ryota Shimizu ◽  
Daisuke Yamashita ◽  
Hynwoong Seo ◽  
...  
Keyword(s):  
Rf Magnetron Sputtering ◽  
Buffer Layers ◽  
Crystal Nucleation ◽  
Zno Films ◽  
Growth Stages ◽  
Initial Growth ◽  
Height Distribution ◽  
Heteroepitaxial Growth ◽  
Distribution Profile

ABSTRACTEffects of surface morphology of buffer layers on ZnO/sapphire heteroepitaxial growth have been investigated by means of “nitrogen mediated crystallization (NMC) method”, where the crystal nucleation and growth are controlled by absorbed nitrogen atoms. We found a strong correlation between the height distribution profile of NMC-ZnO buffer layers and the crystal quality of ZnO films. On the buffer layer with a sharp peak in height distribution, a single-crystalline ZnO film with atomically-flat surface was grown. Our results indicate that homogeneous and high-density nucleation at the initial growth stages is critical in heteroepitaxy of ZnO on lattice mismatched substrates.

Sign in / Sign up

Export Citation Format

Share Document