Heteroepitaxy: The Missing Link Between Surface Chemistry and Dry Corrosion

2000 ◽  
Vol 619 ◽  
Author(s):  
Judith C. Yang ◽  
Mridula Dixit Bharadwaj ◽  
Lori Tropia
Keyword(s):  
Electron Microscopy ◽  
Water Vapor ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Solid State Reactions ◽  
Transmission Electron ◽  
Oxygen Gas ◽  
Cu Oxidation

ABSTRACTWe have investigated the initial stages of Cu (001) oxidation in dry and moist oxidizing conditions using in situ ultra-high vacuum (UIHV) transmission electron microscopy (TEM). To investigate the role of moisture in the solid state reactions in Cu oxidation, we have examined the oxidation of Cu (001) with water vapor. Our observation indicate that water vapor causes reduction of Cu2O and retards the oxidation rate if both oxygen gas and water vapor are used simultaneously which contradicts the thermochemical data. We are also modeling the nucleation to coalescence of the oxide scale using the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation and have noted a qualitative agreement.

The Heteroepitaxial Nucleation and Growth of Metal Oxides by Llvsztu Oxidation

2000 ◽  
Vol 648 ◽  
Author(s):  
Mridula D. Bharadwaj ◽  
Gnang-wen Zhou ◽  
Judith C. Yang
Keyword(s):  
Electron Microscopy ◽  
Water Vapor ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Cu Film ◽  
Cu Oxidation

AbstractHere we report our investigations on the initial stages of Cu(OO1) oxidation in dry and moist atmosphere using in situ ultra high vacuum (UHV) transmission electron microscopy (TEM), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Cu20 islands were observed to grow 3-dimensionally into the Cu film as seen through the above mentioned techniques. Further, we discuss our interpretation of the experimental observations that presence of water vapor in the oxidizing atmosphere retards the rate of Cu oxidation and Cu20 shows surprising reduction when exposed to water vapor.

scholarly journals Surface Kinetics of Copper Oxidation Investigated by In Situ Ultra-high Vacuum Transmission Electron Microscopy

2001 ◽  
Vol 7 (6) ◽  
pp. 486-493 ◽  
Author(s):  
Judith C. Yang ◽  
Mridula D. Bharadwaj ◽  
Guangwen Zhou ◽  
Lori Tropia
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Water Vapor ◽  
High Vacuum ◽  
Quantitative Model ◽  
Ultra High Vacuum ◽  
Copper Oxidation ◽  
Initial Oxidation ◽  
Transmission Electron

AbstractWe review our studies of the initial oxidation stages of Cu(001) thin films as investigated by in situ ultra-high vacuum transmission electron microscopy. We present our observations of surface reconstruction and the nucleation to coalescence of copper oxide during in situ oxidation in O2. We have proposed a semi-quantitative model, where oxygen surface diffusion is the dominant mechanism of the initial oxidation stages of Cu. We have also investigated the effect of water vapor on copper oxidation. We have observed that the presence of water vapor in the oxidizing atmosphere retards the rate of Cu oxidation and Cu2O is reduced when exposed directly to steam.

The Effect of Different Oxidizing Atmospheres on the Initial Kinetics of Copper Oxidation as Studied In Situ UHV-TEM

1999 ◽  
Vol 589 ◽  
Author(s):  
Mridula D. Bharadwaj ◽  
Anu Gupta ◽  
J. Murray Gibson ◽  
Judith C. Yang
Keyword(s):  
Water Vapor ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Solid State Reactions ◽  
Copper Oxidation ◽  
High Vacuum Condition ◽  
Ultra High Vacuum Condition ◽  
Kinetics Of

AbstractEffect of moisture on the oxidation of copper was studied using in situ UHV-TEM. The ultra high vacuum condition is required for minimum contamination effects. The initial observations show that the water vapor reduces the oxide as well as reduces the rate of oxidation if both oxygen gas and water vapor are simultaneously used. Based on these observations, we have speculated on the role of moisture in the solid state reactions involved in copper oxidation

Transmission Electron Microscopy of Epitaxial silicides grown by ultra high vacuum deposition

1989 ◽  
Vol 47 ◽  
pp. 462-463
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Diffraction ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Transmission Electron

The silicides CoSi2 and NiSi2 are both metallic with the fee flourite structure and lattice constants which are close to silicon (1.2% and 0.6% smaller at room temperature respectively) Consequently epitaxial cobalt and nickel disilicide can be grown on silicon. If these layers are formed by ultra high vacuum (UHV) deposition (also known as molecular beam epitaxy or MBE) their thickness can be controlled to within a few monolayers. Such ultrathin metal/silicon systems have many potential applications: for example electronic devices based on ballistic transport. They also provide a model system to study the properties of heterointerfaces. In this work we will discuss results obtained using in situ and ex situ transmission electron microscopy (TEM).In situ TEM is suited to the study of MBE growth for several reasons. It offers high spatial resolution and the ability to penetrate many monolayers of material. This is in contrast to the techniques which are usually employed for in situ measurements in MBE, for example low energy electron diffraction (LEED) and reflection high energy electron diffraction (RHEED), which are both sensitive to only a few monolayers at the surface.

Oxidation Kinetics of Cu-Ni Alloy Observed by in situ UHV-TEM

2007 ◽  
Vol 1026 ◽  
Author(s):  
Li Sun ◽  
John E. Pearson ◽  
Judith C. Yang
Keyword(s):  
High Vacuum ◽  
Alloy Film ◽  
Ultra High Vacuum ◽  
Cross Sectional ◽  
Primary Mechanism ◽  
Transmission Electron ◽  
Ni Alloy ◽  
Cu Oxidation ◽  
Kinetics Of

AbstractThe nucleation and growth of Cu2O and NiO islands due to oxidation of Cu-24%Ni(001) films were monitored at various temperatures by in situ ultra-high vacuum (UHV) transmission electron microscopy (TEM). In remarkable contrast to our previous observations of Cu and Cu-Au oxidation, irregular-shaped polycrystalline oxide islands were observed to form with respect to the Cu-Ni alloy film, and an unusual second oxide nucleation stage was noted. Similar to Cu oxidation, the cross-sectional area growth rate of the oxide island is linear indicating oxygen surface diffusion is the primary mechanism of oxide growth.

In Situ Electron Microscopy Studies of Surface Dynamical Processes

1998 ◽  
Vol 4 (S2) ◽  
pp. 608-609
Author(s):  
Ruud M. Tromp
Keyword(s):  
Electron Microscopy ◽  
Strain Relaxation ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Relaxation Phase ◽  
Transmission Electron ◽  
In Situ Electron Microscopy ◽  
Low Energy Electron ◽  
New Machine

To obtain a full and detailed understanding of the spatiotemporal dynamics of surface processes such as epitaxial growth, strain relaxation, phase transformations and phase transitions, chemisorption and etching, in situ real-time observations have proven to be invaluable. The development of two experimental techniques, i.e. Low Energy Electron Microscopy (LEEM) typically operating at electron energies below 10 eV, and Ultra-High-Vacuum Transmission Electron Microscopy (UHV-TEM) at several 100 keV, has made such in situ studies routinely possible. In many cases, the videodata obtained from such experiments are amenable to detailed, quantitative analysis, yielding statistical, kinetic and thermodynamic information that cannot be obtained in any other way.I will discuss recent experimental developments, including the design and construction of a new and improved LEEM instrument. Figure 1 shows a schematic diagram of this new machine. There are several features that distinguishes this design from most other LEEMs. One is the use of a 90 degree deflection magnetic prism array,

Initial Oxidation Kinetics of Cu(100), (110), and (111) Thin Films Investigated by in Situ Ultra-high-vacuum Transmission Electron Microscopy

2005 ◽  
Vol 20 (7) ◽  
pp. 1684-1694 ◽  
Author(s):  
Guangwen Zhou ◽  
Judith C. Yang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Surface Diffusion ◽  
High Vacuum ◽  
Nucleation And Growth ◽  
Ultra High Vacuum ◽  
Initial Oxidation ◽  
Transmission Electron ◽  
Oxygen Surface

The initial oxidation stages of Cu(100), (110), and (111) surfaces have been investigated by using in situ ultra-high-vacuum transmission electron microscopy (TEM) techniques to visualize the nucleation and growth of oxide islands. The kinetic data on the nucleation and growth of oxide islands shows a highly enhanced initial oxidation rate on the Cu(110) surface as compared with Cu(100), and it is found that the dominant mechanism for the nucleation and growth is oxygen surface diffusion in the oxidation of Cu(100) and (110). The oxidation of Cu(111) shows a dramatically different behavior from that of the other two orientations, and the in situ TEM observation reveals that the initial stages of Cu(111) oxidation are dominated by the nucleation of oxide islands at temperatures lower than 550 °C, and are dominated by two-dimensional oxide growth at temperatures higher than 550 °C. This dependence of the oxidation behavior on the crystal orientation and temperature is attributed to the structures of the oxygen-chemisorbed layer, oxygen surface diffusion, surface energy, and the interfacial strain energy.

Sign in / Sign up

Export Citation Format

Share Document