Process and Mechanism of CoSi2/Si Solid Phase Epitaxy by Multilayer Reaction

1999 ◽  
Vol 580 ◽  
Author(s):  
Bing-Zong Li ◽  
Xin-Ping Qu ◽  
Guo-Ping Ru ◽  
Ning Wang ◽  
Paul Chu
Keyword(s):  
Epitaxial Growth ◽  
Solid Phase ◽  
Amorphous Layer ◽  
Solid Phase Epitaxy ◽  
Initial Stage ◽  
Vital Effect ◽  
Amorphous Si ◽  
Kinetics Of ◽  
State Amorphization

AbstractA multilayer structure of Co/a-Si/Ti/Si(100) together with Co/Ti/Si(100) is applied to investigate the process and mechanism of CoSi2 epitaxial growth on a Si(100) substrate. The experimental results show that by adding an amorphous Si layer with a certain thickness, the epitaxial quality of CoSi2 is significantly improved. A multi-element amorphous layer is formed by a solid state amorphization reaction at the initial stage of the multilayer reaction. This layer acts as a diffusion barrier, which controls the atomic interdiffusion of Co and Si and limits the supply of Co atoms. It has a vital effect on the multilayer reaction kinetics, and the epitaxial growth of CoSi2 on Si. The kinetics of the CoSi2 growth process from multilayer reactions is investigated.

Epitaxial growth versus nucleation in amorphous Si doped with Cu and Ag

1993 ◽  
Vol 8 (4) ◽  
pp. 820-829 ◽  
Author(s):  
J.S. Custer ◽  
Michael O. Thompson ◽  
D.J. Eaglesham ◽  
D.C. Jacobson ◽  
J.M. Poate
Keyword(s):  
Epitaxial Growth ◽  
Solid Phase ◽  
Intrinsic Rate ◽  
Amorphous Layer ◽  
Solubility Limit ◽  
Solid Phase Epitaxy ◽  
Metal Impurities ◽  
Random Nucleation ◽  
Si Doped ◽  
Amorphous Si

The competition between solid phase epitaxy and random nucleation in amorphous Si implanted with Cu and Ag has been studied. At low metal concentrations, solid phase epitaxy proceeds with slight deviations from the intrinsic rate, with the impurity segregated and evenly distributed in the amorphous layer. At an impurity concentration of 0.12 at.%, rapid nucleation occurs, transforming the remaining layer into polycrystalline Si. The nucleation rate is ≥108 the intrinsic homogeneous rate. The effects of the metals on epitaxy scale with the amount of metal–Si interaction. Nucleation appears to occur when the metal impurities exceed their absolute solubility limit and begin to phase separate.

Kinetics of solid phase epitaxy in thick amorphous Si layers formed by MeV ion implantation

1990 ◽  
Vol 57 (13) ◽  
pp. 1340-1342 ◽  
Author(s):  
J. A. Roth ◽  
G. L. Olson ◽  
D. C. Jacobson ◽  
J. M. Poate
Keyword(s):  
Ion Implantation ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Amorphous Si ◽  
Kinetics Of

The Effect of Hydrogen on the Kinetics of Solid Phase Epitaxy in Amorphous Silicon

1990 ◽  
Vol 205 ◽  
Author(s):  
J. A. Roth ◽  
G. L. Olson ◽  
D. C. Jacobson ◽  
J. M. Poate ◽  
C. Kirschbaum
Keyword(s):  
Growth Rate ◽  
Solid Phase ◽  
Intrinsic Value ◽  
Amorphous Layer ◽  
Inert Gas ◽  
Solid Phase Epitaxy ◽  
Depth Profiles ◽  
Kinetics Of ◽  
Crystal Interface ◽  
Good Agreement

AbstractThis paper discusses the intrusion of H into a-Si layers during solid phase epitaxy and the effect of this H on the growth kinetics. We show that during annealing in the presence of water vapor, H is continuously generated at the oxidizing a-Si surface and diffuses into the amorphous layer, where it causes a reduction in the epitaxial growth rate. The measured variation of growth rate with the depth of the amorphous/crystal interface is correlated with the concentration of H at the interface. The diffusion coefficient for H in a-Si is determined by comparing measured depth profiles with calculated values. Hydrogen intrusion is observed even in layers annealed in vacuum and in inert gas ambients. Thin (<;5000 Åthick) a-Si layers are especially susceptible to this effect, but we show that in spite of the presence of H the activation energy for SPE derived earlier from thin-layer data is in good agreement with the intrinsic value obtained from thick, hydrogen-free layers.

Epitaxy and Nucleation in Cu and Ag Doped Amorphous Si

1990 ◽  
Vol 205 ◽  
Author(s):  
J. S. Custer ◽  
Michael O. Thompson ◽  
D. J. Eaglesham ◽  
D. C. Jacobson ◽  
J. M. Poate ◽  
...  
Keyword(s):  
Solid Phase ◽  
Amorphous Material ◽  
Intrinsic Rate ◽  
Amorphous Layer ◽  
Solid Phase Epitaxy ◽  
Small Deviations ◽  
Random Nucleation ◽  
Low Concentrations ◽  
Critical Metal ◽  
Amorphous Si

AbstractThe competition between solid phase epitaxy and random nucleation during thermal annealing of amorphous Si implanted with the fast diffusers Cu and Ag has been studied. For low concentrations of these impurities, solid phase epitaxy proceeds with small deviations from the intrinsic rate and with the impurity remaining in the shrinking amorphous layer. At a critical metal concentration in the amorphous layer of ∼ 0.12 at.% rapid random nucleation occurs, halting epitaxy and transforming the remaining amorphous material to polycrystalline Si via grain growth. The nucleation rate is at least 8 orders of magnitude greater than the intrinsic homogeneous rate. At higher Cu concentrations nucleation is observed below the temperature needed for epitaxy (400°C). This nucleation, clearly caused by the presence of Cu or Ag in the layer, may be induced by the impurities exceeding the absolute stability concentration and starting to phase separate, leading to enhanced crystal Si nucleation in the metal rich regions.

Segregation and Trapping of Erbium in Silicon at a Crystal-Amorphous or Crystal-Vacuum Interface

1996 ◽  
Vol 422 ◽  
Author(s):  
A. Polman ◽  
R. Serna ◽  
J. S. Custer ◽  
M. Lohmeier
Keyword(s):  
Molecular Beam Epitaxy ◽  
Epitaxial Growth ◽  
Growth Model ◽  
Molecular Beam ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Kinetic Growth ◽  
Vacuum Interface ◽  
Amorphous Si

AbstractThe incorporation of erbium in silicon is studied during solid phase epitaxy (SPE) of Erimplanted amorphous Si on crystalline Si, and during Si molecular beam epitaxy (MBE). Segregation and trapping of Er is observed on Si(100), both during SPE and MBE. The trapping during SPE shows a discontinuous dependence on Er concentration, attributed to the effect of defect trap sites in the amorphous Si near the interface. Trapping during MBE is described by a continuous kinetic growth model. Above a critical Er density (which is lower for MBE than for SPE), growth instabilities occur, attributed to the formation of silicide precipitates. No segregation occurs during MBE on Si(111), attributed to the epitaxial growth of silicide precipitates.

Kinetics and Mechanisms of Solid Phase Epitaxy and Competitive Processes in Silicon

1984 ◽  
Vol 35 ◽  
Author(s):  
G.L. Olson
Keyword(s):  
Amorphous Silicon ◽  
Epitaxial Growth ◽  
Recent Progress ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Temperature Dependent ◽  
Solid Phase Crystallization ◽  
Induced Changes ◽  
Kinetics Of ◽  
Very High

ABSTRACTRecent progress in studies of temperature dependent kinetic competition during solid phase crystallization of silicon is reviewed. Specific areas which are emphasized include: the enhancement of solid phase epitaxial growth rates by impurity-induced changes in electronic properties at the crystal/amorphous interface, the influence of impurity diffusion and precipitation in amorphous silicon on the kinetics of epitaxial growth, the effects of impurities on the kinetic competition between solid phase epitaxy and random crystallization, and the kinetics of solid phase crystallization at very high temperatures in silicon.

Kinetics of Intrinsic and Dopant-Enhanced Solid Phase Epitaxy in Buried Amorphous Si Layers

1996 ◽  
Vol 439 ◽  
Author(s):  
J. C. McCallum
Keyword(s):  
Ion Implantation ◽  
Dopant Concentration ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Entire Concentration Range ◽  
Time Resolved ◽  
Amorphous Si ◽  
First Time ◽  
Kinetics Of ◽  
Suitable Environment

AbstractThe kinetics of intrinsic and dopant-enhanced solid phase epitaxy (SPE) have been measured in buried amorphous Si (a-Si) layers produced by ion implantation. Buried a-Si layers formed by self-ion implantation provide a suitable environment for studies of the intrinsic growth kinetics of amorphous Si, free from the rate-retarding effects of H. For the first time, dopant-enhanced SPE rates have been measured under these H-free conditions. Buried a-Si layers containing uniform As concentration profiles ranging from 1–16.1 × 1019 As.cm−3 were produced by multiple-energy ion implantation and time resolved reflectivity was used to measure SPE rates over the temperature range 480–660°C. In contrast to earlier studies, the dopant-enhanced SPE rate is found to depend linearly on the As concentration over the entire concentration range measured. The SPE rate can be expressed in the form, v/vi(T) = 1 + N/[No exp(-ΔE/kT)], where vi(T) is the intrinsic SPE rate, N is the dopant concentration and No = 1.2 × 1021 cm−3, ΔE = 0.21 eV.

Lateral Solid Phase Epitaxy of Evaporated Amorphous Si Films onto SiO2 Patterns

1983 ◽  
Vol 25 ◽  
Author(s):  
H. Yamamoto ◽  
H. Ishiwara ◽  
S. Furukawa ◽  
M. Tamura ◽  
T. Tokuyama
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Implantation ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Si Substrates ◽  
Transmission Electron ◽  
Amorphous Si ◽  
Si Films ◽  
Kinetics Of

ABSTRACTLateral solid phase epitaxy (L-SPE) of amorphous Si (a-Si) films vacuum-evaporated on Si substrates with SiO2 patterns has been investigated, in which the film first grows vertically in the regions directly contacted to the Si substrates and then grows laterally onto SiO2 patterns. It has been found from transmission electron microscopy and Nomarski optical microscopy that use of dense a-Si films, which are formed by evaporation on heated substrates and subsequent amorphization by Si+ ion implantation, is essentially important for L-SPE. The maximum L-SPE length of 5–6μm was obtained along the <010> direction after 10hourannealing at 600°C. The kinetics of the L-SPE growth has also been investigated.

Questions And Answers On The Activation Strain

1993 ◽  
Vol 321 ◽  
Author(s):  
Michael J. Aziz
Keyword(s):  
Epitaxial Growth ◽  
Oral Presentation ◽  
Solid Phase ◽  
Strain Tensor ◽  
Solid Phase Epitaxy ◽  
Questions And Answers ◽  
Amorphous Si

ABSTRACTThe activation strain tensor describes the effect of nonhydrostatic stresses on atomic or interfacial Mobilities. It has been measured for solid phase epitaxial growth of crystalline Si (001) into amorphous Si. The activation strain concept is explained and some subtle points are discussed. Implications for proposed mechanisms of solid phase epitaxy are reviewed, and new implications for combined bulk and interfacial control are presented. Questions raised during the oral presentation are answered.

Competition Between Solid Phase Epitaxy and Random Crystallization During cw Laser Annealing of Amorphous Si Films

1981 ◽  
Vol 4 ◽  
Author(s):  
J.A. Roth ◽  
S.A. Kokorowski ◽  
G.L. Olson ◽  
L.D. Hess
Keyword(s):  
Laser Annealing ◽  
Volume Fraction ◽  
Solid Phase ◽  
Rapid Heating ◽  
Film Deposition ◽  
Solid Phase Epitaxy ◽  
Laser Crystallization ◽  
Amorphous Si ◽  
Si Films ◽  
Kinetics Of

ABSTRACTThe kinetics of amorphous-to-polycrystalline conversion and solid phase epitaxy (SPE) in UHV-deposited Si films have been determined over a wide temperature range by the use of optical reflectivity measurements made during rapid heating by a cw Ar laser. Crystallization rates measured in UHV following film deposition are reported and compared to rates measured in air in order to elucidate the effects of contaminants on the processes. The effects of boron doping on nucleation and growth kinetics are also reported. The crystallization rates determined in these studies can be used to predict the volume fraction of polycrystalline material formed during laserinduced SPE growth of thick epitaxial layers.

Sign in / Sign up

Export Citation Format

Share Document