Film Properties of Low-Density and Ultra-Low-Dielectric-Constant Material

1999 ◽  
Vol 565 ◽  
Author(s):  
Ryo Muraguchi ◽  
Miki Egami ◽  
Hiroki Arao ◽  
Atsushi Tounai ◽  
Akira Nakashima ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Pore Diameter ◽  
Average Pore Size ◽  
Dielectric Constants ◽  
Low Density ◽  
Film Properties ◽  
Average Pore ◽  
Low Dielectric ◽  
Diameter Range ◽  
Interpenetrated Structure

AbstractWe studied the effect of pore diameter on the film properties of low-density porous material with special interest in the pore diameter range below 5nm. A novel low-density material, Interpenetrated SOG (IPS), was designed to realize such porous character. It is composed of a pyrolic template, which is an organic olygomer, and framework, made from SOG polymer and silica sol, forming an interpenetrated structure. Thermal decomposition of the organic component successfully resulted in films with pore diameter range below 5nm. It is found that the dielectric constant and the pore diameter depended on the density and the film strength was affected by the average pore diameter. Practically, films with the average pore size below 5nm possessed dielectric constants as low as 2.2–2.0 and sufficient strength.

The characterization and preparation of porous low dielectric films using various cyclodextrins as template materials

2003 ◽  
Vol 766 ◽  
Author(s):  
Jin-Heong Yim ◽  
Jung-Bae Kim ◽  
Hyun-Dam Jeong ◽  
Yi-Yeoul Lyu ◽  
Sang Kook Mah ◽  
...  
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Dielectric Constant ◽  
Pore Structure ◽  
Pore Diameter ◽  
Dielectric Films ◽  
Low Dielectric Constant ◽  
Cyclodextrin Derivatives ◽  
Low Dielectric ◽  
Low K

AbstractPorous low dielectric films containing nano pores (∼20Å) with low dielectric constant (<2.2), have been prepared by using various kinds of cyclodextrin derivatives as porogenic materials. The pore structure such as pore size and interconnectivity can be controlled by changing functional groups of the cyclodextrin derivatives. We found that mechanical properties of porous low-k thin film prepared with mCSSQ (modified cyclic silsesquioxane) precursor and cyclodextrin derivatives were correlated with the pore interconnection length. The longer the interconnection length of nanopores in the thin film, the worse the mechanical properties of the thin film (such as hardness and modulus) even though the pore diameter of the films were microporous (∼2nm).

Fabrication of low dielectric constant polyimide/TiO2 nanofibers with enhanced UV-light shielding properties

2018 ◽  
Vol 31 (8) ◽  
pp. 986-995
Author(s):  
Lei Wang ◽  
Guifen Gong ◽  
Junyao Shen ◽  
Jinsong Leng
Keyword(s):  
Dielectric Constant ◽  
Light Absorption ◽  
Composite Nanofibers ◽  
Uv Light ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Number Density ◽  
Tio2 Nanofibers ◽  
Low Dielectric ◽  
Mechanical Tensile

Polyimide (PI)/titanium dioxide (TiO2) composite nanofibers (NFs) with average diameters of 200–250 nm were synthesized via electrospinning. The total number density of dipoles decreased significantly, owing to the porous structures and compact interface between TiO2 NPs and PI matrix. All PI/TiO2 NFs maintain low dielectric constants and losses. For example, the dielectric constants of PI/TiO2-6% NFs are all lower than 2.6, being exposed to temperatures from 25°C to 200°C. Meantime, the dielectric losses of PI/TiO2-6% NFs are below 0.005. For ultraviolet (UV)-light shielding performance, the PI/TiO2 NFs exhibited good UV-light shielding and corresponding anti-photoaging properties. The reason can be ascribed from high UV-light absorption and scattering ability in the TiO2 NPs. The best UV-light absorption (average: 3.71) and corresponding absorption decay (15.13%) were achieved for optimized PI/TiO2-6% NFs. Other fundamental characteristics, such as the thermal stability, mechanical tensile property, and hydrophobicity, were also investigated. Such low dielectric constant PI/TiO2 composite NFs can be alternatively chosen under a longtime UV-light exposing condition.

Observation of Intrusion Rates of Hexamethyldisilazane During Supercritical Carbon Dioxide Functionalization of Triethoxyfluorosilane Low-k Films

2005 ◽  
Vol 863 ◽  
Author(s):  
P.M. Capani ◽  
P.D. Matz ◽  
D.W. Mueller ◽  
M.J. Kim ◽  
E.R. Walter ◽  
...  
Keyword(s):  
Average Pore Size ◽  
Film Surface ◽  
Adsorbed Water ◽  
Surface Hydrophobicity ◽  
Dielectric Constants ◽  
Average Pore ◽  
Silica Films ◽  
Silylating Agents ◽  
Penetration Behavior ◽  
Low K

AbstractWater adsorption by porous low-k silica films results in increased dielectric constants and is often due to silanol groups on the pore surfaces. Reacting the silanols with silylating agents (e.g., hexamethyldisilazane (HMDS) and trimethylchlorosilane (TMCS)) in supercritical CO2 (SC-CO2) can increase film hydrophobicity and can remove adsorbed water. In porous methylsilsesquioxane (MSQ) films (average pore size ∼ 3-4nm), it has been determined that supercritical silylation reactions do not substantially penetrate beyond the film surface.1,2 In this work we have examined the supercritical penetration behavior of silylating agents in low-k films with larger pore sizes (5-10nm). The depth and extent of reactants was determined by in situ infrared spectroscopy (FTIR), and surface hydrophobicity was examined by contact angle experiments.

Dielectric Properties of Sol - Gel Silica Glasses

1986 ◽  
Vol 72 ◽  
Author(s):  
G. V. Chandrashekhar ◽  
M. W. Shafer
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Elemental Carbon ◽  
Sol Gel ◽  
Fused Silica ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Silica Glasses ◽  
Low Dielectric ◽  
Gel Technique

AbstractDielectric properties have been measured for a series of porous and fully densified silica glasses, prepared by the sol-gel technique starting from Si-methoxide or Si-fume. The results for the partially densified glasses do not show any preferred orientation for porosity. When fully densified (˜2.25 gms/cc) without any prior treatment of the gels, they have dielectric constants of ≥ 6.5 and loss factors of 0.002 at 1 MHz, compared to values of 3.8 and <0.001 for commercial fused silica. There is no corresponding anomaly in the d.c. resistivity. Elemental carbon present to the extent of 400–500 ppm is likely to be the main cause for this enhanced dielectric constant. Extensive cleaning of the gels prior to densification to remove this carbon were not completely successful pointing to the difficulty in preparing high purity, low dielectric constant glasses via the organic sol-gel route at least in the bulk form.

Porous Silicon Oxynitride Films Derived from Polysilazane as a Novel Low-Dielectric Constant Material

1999 ◽  
Vol 565 ◽  
Author(s):  
T. Aoki ◽  
Y Shimizu ◽  
T. Kikkawa
Keyword(s):  
Dielectric Constant ◽  
Dielectric Constants ◽  
Silicon Oxynitride ◽  
Low Dielectric Constant ◽  
Oxidation Reactions ◽  
Sem Images ◽  
Cross Sectional ◽  
Low Dielectric ◽  
Inorganic Films ◽  
Hydrophobic Treatment

AbstractA novel spin on material derived from perhydropolysilazane that converts into ultra-low k inorganic films is described in this paper. The obtained films, cured at 400°C in N2 atmosphere, exhibit dielectric constants as low as 1.6 which do not change after holding the wafers in a clean-room mbient for 2 months. Cross-sectional SEM images of the cured films show the aggregation of small granules with diameters ranging from 5 to 30 nm. The films can be obtained by conventional SOG process: spin-coating, baking and curing, without any additional process such as hydrophobic treatment.The average atomic compositions of the films are, Si/O/N/C = 40/55/5/0.5 (atomic %), by XPS analysis. These results indicate that the films have hydrogen silicon oxynitride structures. No evolution of H2O and NH3 was detected by TDS analysis in the temperature range of RT to 800°C. Hydrophobic Si-H and Si-H2 groups remaining in the film might prevent water absorption, resulting in the low dielectric constant.The remainder of Si-H and Si-H2 constituents in the cured films is the result of selective oxidation reactions of perhydropolysilazane in the baking process with the use of a specific catalyst. The structures of the films are tailored by altering the amount of the catalyst. In this study, we also demonstrate the relationship between the effect of the catalyst and the film properties.

Conductances of potassium chloride and tetrabutyl ammonium picrate in dioxan-water mixtures at pressures up to 2500 bars

1970 ◽  
Vol 23 (5) ◽  
pp. 905 ◽  
Author(s):  
PJ Pearce ◽  
W Strauss
Keyword(s):  
Dielectric Constant ◽  
Potassium Chloride ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Solvent Concentration ◽  
Electrolytic Conductance ◽  
Low Dielectric ◽  
Tetrabutyl Ammonium ◽  
Finite Concentration ◽  
Tetrabutylammonium Picrate

The electrolytic conductance of solutions of potassium chloride and tetrabutyl- ammonium picrate over a range of concentrations have been measured in dioxan-water mixtures containing 0, 25, 50, 70, and 80% dioxan at 25� and pressures up to 1000 and 2500 bars respectively for the two solutes. The solvent concentration range corresponds to a range of dielectric constants of 78.3 (for water) to 11.98 (80% dioxan). The association of KCl in solutions of low dielectric constant is reduced by increasing pressure, so that the conductances of the solutions of finite concentration are not reduced as much by pressure as at infinite dilution. In contrast to this, the solutions of the tetrabutylammonium picrate are wholly dissociated even in very low dielectric constant solvents, as is shown by the limited concentration dependence of the conductance pressure characteristics.

Synthesis of a Novel Low Dielectric Constant Fluorine Containing Epoxy

2012 ◽  
Vol 262 ◽  
pp. 448-453 ◽  
Author(s):  
Jian Yong Lv ◽  
Yan Meng ◽  
Li Fan He ◽  
Teng Qiu ◽  
Xiao Yu Li ◽  
...  
Keyword(s):  
Weight Loss ◽  
Dielectric Constant ◽  
Bisphenol A ◽  
Water Absorption ◽  
Diglycidyl Ether ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Degradation Temperature

A novel fluorine containing epoxy 4-fluoro-4′,4″-diepoxypropoxy triphenyl methane (FDE) was designed and synthesized. The synthesized epoxy was cured by methyl nadic anhydride (MNA) and diglycidyl ether of bisphenol A (DGEBA) was chosen for comparison. Both glass transfer temperature (Tg) and 5% weight loss degradation temperature (Td5%) of cured FDE are over 60°C higher than that of DGEBA. Dielectric constants of the cured FDE at 106 Hz and 107 Hz are 3.09 and 2.91, comparing to 3.50 and 3.24 of the cured DGEBA, respectively. Furthermore, water absorption of the cured FDE is lower than that of DGBEA.

Effect of Fluorine Addition to Plasma-Enhanced Chemical Vapor Deposition Silicon Oxide Film

1996 ◽  
Vol 443 ◽  
Author(s):  
S. W. Lim ◽  
M. Miyata ◽  
T. Naito ◽  
Y. Shimogaki ◽  
Y. Nakano ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Silicon Oxide ◽  
Chemical Vapor ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Polarization Component ◽  
Low Dielectric ◽  
Step Coverage

AbstractOne solution to reduce the time constant of ultra large scale integrated circuit (ULSI) is the use of a low dielectric constant intermetal film like fluorinated silicon oxide (SiOF). We could obtain SiOF films with low dielectric constant as low as 2.6 and good step coverage by adding CF4 to SiH4 and N2O in plasma-enhanced chemical vapor deposition (PECVD) process. To investigate the dielectric constants due to each polarization and the reason for the decrease in the dielectric constant, we used capacitance-voltage (C-V) and ellipsometry measurements, and Kramers-Kronig transformation. The decrease in dielectric constant could not be completely explained by the reduction in ionic and electronic polarization. We could detect silanol groups, Si-OH in the films and their decrease with increasing CF4 flow rate. It is suggested that the main polarization component to decrease dielectric constant is such as orientational polarization. The step coverage of film was improved by adding CF4. It is suggested that the reduction in the sticking probability of films forming species due to the change in surface state improved the step coverage.

Preparation and Characterization of Low Dielectric Constant Films Using Silicon Sources

2020 ◽  
Vol 993 ◽  
pp. 927-932
Author(s):  
Zhi Wei He ◽  
Hong Xiao Lin ◽  
Chun Yan Li ◽  
Ashok M. Mahajan ◽  
Swati A. Gupta ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Optical Properties ◽  
Precursor Solution ◽  
Dielectric Constants ◽  
Low Dielectric Constant ◽  
Low Dielectric ◽  
Mis Devices ◽  
Iv Curves ◽  
Silicon Sources

Effect of various silicon sources, such as TEOS, MTES mixed with TEOS and 1,3,5-tris(triethoxymethyl) on SiO2 films was investigated. The synthesized solutions were used as silicon sources to prepare silica-like backbone films. The investigation showed that all precursors can able to produce the flat and uniform films. An FTIR spectrum confirmed the formation of SiO2 in film matrix. The results indicated that the internal microstructure of each film is different. The incorporation of less polar bonds such as F and C was carried out using various Si sources, while the introduction of these sources confirmed through FTIR spectra. Optical properties of the films were carried out by using ellipsometric porosometry (EP) measurement. The leakage current density for the films prepared by using TEOS, MTES and 135TTEB was observed to be 2.8 × 10-7 A/cm2, 2.9 × 10-8 A / cm2, and 4.1 × 10-6 A / cm2, respectively, at 1 MV/cm electric field strength by the IV curves obtained by semiconductor characterization after fabricating MIS devices. The calculated dielectric constants from RI of the deposited SiO2 films were 2.0, 1.9 and 2.5 respectively. When the microstructure of the precursor solution changed, the introduction of atomic morphology or terminal inerted group ratio changed the internal bridging mode of SiO2, and thereby significantly reduced the dielectric constant and improved insulation.

Fiber Foam Tuffcrete Structure and Properties Formation on the Basis of Volcanic Tuff Dusting Waste

2020 ◽  
Vol 1011 ◽  
pp. 130-135
Author(s):  
Tolya Khezhev ◽  
Asker Ansokov ◽  
Ibragim Kerefov ◽  
Rustam Malkarov
Keyword(s):  
Pore Diameter ◽  
Average Pore Size ◽  
Strength Properties ◽  
Fiber Reinforced Concrete ◽  
Diameter Distribution ◽  
Foam Concrete ◽  
Average Pore ◽  
Volcanic Tuff ◽  
Fiber Concrete ◽  
The Matrix

The results of studies on the foam concrete and fiber concrete development based on volcanic tuff dusting waste are presented. The foam concrete compositions that can significantly reduce the Portland cement consumption and at the same time increase its strength properties are proposed. To study the dispersed reinforcement parameters’ effect on the properties of fiber-reinforced concrete, an experiment with a second-order composite rotatable plan such as a regular hexagon was conducted. The use of fosta nylon fibers in foam concrete increases their strength properties and positively affects the structure. Dispersed fibers not only reinforce the matrix, but also significantly change its structure indicators, in particular, porosity indicators (uniformity of pore diameter distribution, average pore size), which in turn affects the strength characteristics of the material.

Sign in / Sign up

Export Citation Format

Share Document