Young's Modulus, Yield Strength and Fracture Strength of Microelements Determined by Tensile Testing

1998 ◽  
Vol 518 ◽  
Author(s):  
S. Greek ◽  
F. Ericson
Keyword(s):  
Mechanical Properties ◽  
Yield Strength ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Crystalline Silicon ◽  
Young's Modulus ◽  
Iron Alloy ◽  
Single Crystalline Silicon ◽  
Nickel Iron ◽  
Nickel Iron Alloy

AbstractSome mechanical properties of thin film microelements, e.g. fracture strength, depend on the manufacturing process, the load application as well as on size and shape of the microelements. Hence, the test structures that are used to determine mechanical properties should have dimensions of the same order of magnitude as an application structure, i.e. microelements must be used to accurately characterise MEMS. The fabrication of test structures must be realised in the same process as an intended application in order to give accurate results. Microelements are easily viewed in an SEM, but to be handled and tested in situ a micromanipulator was developed. Test structures were designed as released beams fixed to the substrate at one end, with a ring at the other. A high-precision testing unit was mounted on the micromanipulator next to the test structures. In the SEM, the testing unit was manoeuvred to grip the ring of the test structure beam and a tensile test of the beam was then executed. From the test data Young's modulus and fracture strength of polysilicon and single crystalline silicon were evaluated. Relative measurement of test structures with different beam lengths enabled Young's modulus to be evaluated with an accuracy of ±5%. Young's modulus was determined to 172±7 GPa for polysilicon and 142±9 GPa for single crystalline silicon in the <100> direction. The fracture surfaces were examined and compared. Young's modulus, yield strength and fracture strength of microelements made from electroplated nickel and nickel-iron alloy were also measured. Young's modulus was evaluated to 231±12 GPa for nickel and 155±8 GPa for nickel-iron alloy composed of 72 at% nickel and 28 at% iron.

Local Mechanical Properties of Highly Porous Si3N4 for Trabecular Bone Replacement

2015 ◽  
Vol 662 ◽  
pp. 142-146
Author(s):  
Zuzana Pramuková Vilčeková ◽  
Monika Kašiarová ◽  
Magdaléna Precnerová Domanická ◽  
Miroslav Hnatko ◽  
Pavol Šajgalík
Keyword(s):  
Mechanical Properties ◽  
Silicon Nitride ◽  
Yield Strength ◽  
Trabecular Bone ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Polyurethane Foams ◽  
Strength Increase ◽  
Bone Replacement ◽  
Highly Porous

The study deals with the development of highly porous undegradable ceramics based on silicon nitride as potential replacement of trabecular bone. These materials were produced using replication method with polyurethane foams as pore-forming agents to achieve similar porous structure to trabecular bone. Prepared porous ceramics had a bimodal pore structure with macro-pores larger than 200 μm and micro-pores smaller than 1 μm in diameter, which are necessary for tissue ingrowths, cell adhesion, adsorption of biological metabolites and nutrition delivery in organism. The microstructure and local mechanical properties (Young’s modulus and Yield strength) were evaluated and compared with human trabecular bone. Results showed that studied porous materials have satisfactory porosity and pore sizes for trabecular bone replacement. Young’s modulus of bone was 12.6 ± 2.23 GPa and porous silicon nitride samples ranged from 10.9 ± 3.38 GPa to 12.9 ± 1.13 GPa. The values of Yield strength of trabecular bone was determined as 493 ± 30.7 MPa and the values of porous samples varied from 250 ± 19.3 MPa to 558 ± 36.5 MPa. Young’s modulus and Yield strength increase with increasing of the pre-sintering temperature and multiple infiltrations.

Mechanical Properties of Transparent Polycrystalline Silicon Nitride

2006 ◽  
Vol 317-318 ◽  
pp. 305-308 ◽  
Author(s):  
Rak Joo Sung ◽  
Takafumi Kusunose ◽  
Tadachika Nakayama ◽  
Yoon Ho Kim ◽  
Tohru Sekino ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Silicon Nitride ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Polycrystalline Silicon ◽  
Volume Fraction ◽  
Young's Modulus ◽  
Β Phase ◽  
Α Phase

A novel transparent polycrystalline silicon nitride was fabricated by hot-press sintering with MgO and AlN as additives. The mixed powder with 3 wt.% MgO and 9 wt.% AlN was sintered at 1900oC for 1 hour under 30 MPa pressure in a nitrogen gas atmosphere. Transparent polycrystalline silicon nitride was successfully fabricated. The mechanical properties such as density, hardness, young’s modulus, fracture strength and fracture toughness were evaluated. The effect of α/β phase on the mechanical properties of transparent polycrystalline silicon nitride was investigated. The properties were changed depending on the amount of α/β phase. The hardness and Young's modulus increased with increasing the volume fraction of α-phase fraction as a reflection of the higher hardness of α-phase Si3N4. The fracture toughness and fracture strength decreased with decreasing the volume fraction of β-phase Si3N4.

scholarly journals Effect of Defects on the Mechanical and Thermal Properties of Graphene

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 347 ◽  
Author(s):  
Maoyuan Li ◽  
Tianzhengxiong Deng ◽  
Bing Zheng ◽  
Yun Zhang ◽  
Yonggui Liao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Strain Rate ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Fracture Strain ◽  
Young's Modulus ◽  
Pristine Graphene ◽  
Mechanical And Thermal Properties

In this study, the mechanical and thermal properties of graphene were systematically investigated using molecular dynamic simulations. The effects of temperature, strain rate and defect on the mechanical properties, including Young’s modulus, fracture strength and fracture strain, were studied. The results indicate that the Young’s modulus, fracture strength and fracture strain of graphene decreased with the increase of temperature, while the fracture strength of graphene along the zigzag direction was more sensitive to the strain rate than that along armchair direction by calculating the strain rate sensitive index. The mechanical properties were significantly reduced with the existence of defect, which was due to more cracks and local stress concentration points. Besides, the thermal conductivity of graphene followed a power law of λ~L0.28, and decreased monotonously with the increase of defect concentration. Compared with the pristine graphene, the thermal conductivity of defective graphene showed a low temperature-dependent behavior since the phonon scattering caused by defect dominated the thermal properties. In addition, the corresponding underlying mechanisms were analyzed by the stress distribution, fracture structure during the deformation and phonon vibration power spectrum.

50 NICKEL-IRON ALLOY

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Nickel Alloys ◽  
Room Temperature ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Iron Nickel ◽  
Nickel Iron Alloy ◽  
Iron Nickel Alloys

Abstract The 50 Nickel-Iron Alloy is recommended for glass-to-metal seals. It is used with such glasses as Types 0120 and 9010 that have higher than normal thermal expansion and with certain ceramics. It is used in a number of applications where expansion must be almost linear to 1000 F. The 50 Nickel-Iron Alloy has relatively good mechanical properties; in fact, at room temperature it has a tensile strength of 80,000 psi and an elongation of 35%. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-276. Producer or source: Mills that produce iron-nickel alloys.

TECHALLOY GLASSEAL 52

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract TECHALLOY GLASSEAL 52 is a nickel-iron alloy produced for glass-to-metal seals with higher than normal thermal-expansion glasses such as Types 0120 and 9010, and certain ceramics. It has relatively good mechanical properties: a tensile strength of 80,000 psi and an elongation of 35%. It is used in a number of applications where expansion is required to be almost linear to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-260. Producer or source: Techalloy Company Inc..

scholarly journals On the Grain Microstructure–Mechanical Properties Relationships in Aluminium Alloy Parts Fabricated by Laser Powder Bed Fusion

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1175
Author(s):  
Pavel A. Somov ◽  
Eugene S. Statnik ◽  
Yuliya V. Malakhova ◽  
Kirill V. Nyaza ◽  
Alexey I. Salimon ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Yield Strength ◽  
Aluminium Alloy ◽  
Young’S Modulus ◽  
Mechanical Performance ◽  
Young's Modulus ◽  
Grain Morphology ◽  
Tensile Tests ◽  
Grain Structure ◽  
Surface Finishing

Recent years witnessed progressive broadening of the practical use of 3D-printed aluminium alloy parts, in particular for specific aerospace applications where weight saving is of great importance. Selective laser melting (SLM) is an intrinsically multi-parametric fabrication technology that offers multiple means of controlling mechanical properties (elastic moduli, yield strength, and ductility) through the control over grains size, shape, and orientation. Targeted control over mechanical properties is achieved through the tuning of 3D-printing parameters and may even obviate the need of heat treatment or mechanical post-processing. Systematic studies of grain structure for different printing orientations with the help of EBSD techniques in combination with mechanical testing at different dimensional levels are the necessary first steps to implement this agenda. Samples of 3D-printable Al-Mg-Si RS-333 alloy were fabricated in three orientations with respect to the principal build direction and the fast laser beam scanning direction. Sample structure and proper-ties were investigated using a number of techniques, including EBSD, in situ SEM tensile testing, roughness measurements, and nanoindentation. The as-printed samples were found to display strong variation in Young’s modulus values from nanoindentation (from 43 to 66 GPa) and tensile tests (from 54 to 75 GPa), yield stress and ultimate tensile strength (100–195 and 130–220 MPa) in different printing orientations, and almost constant hardness of about 0.8 GPa. A further preliminary study was conducted to assess the effect of surface finishing on the mechanical performance. Surface polishing was seen to reduce Young’s modulus and yield strength but improves ductility, whereas the influence of sandblasting was found to be more controversial. The experimental results are discussed in connection with the grain morphology and orientation.

scholarly journals Modelling of Nanoindentation of TiAlN and TiN Thin Film Coatings for Automotive Bearing

2019 ◽  
Vol 8 (3) ◽  
pp. 7194-7199
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Yield Strength ◽  
Young’S Modulus ◽  
Poisson’S Ratio ◽  
Young's Modulus ◽  
Poisson's Ratio ◽  
The Finite Element Method ◽  
Element Method

Bearings are critical components for the transmission of motion in machines. Automotive components, especially bearings, will wear out over a certain period of time because they are constantly subjected to high levels of stress and friction. Studies have proven that coatings can extend the lifespan of bearings. Hence, it is necessary to conduct studies on coatings for bearings, particularly the mechanical and wear properties of the coating material. This detailed study focused on the mechanical properties of single-coatings of TiN and TiAIN using the finite element method (FEM). The mechanical properties that can be obtained from nano-indentation experiments are confined to just the Young’s modulus and hardness. Therefore, nanoindentation simulations were conducted together with the finite element method to obtain more comprehensive mechanical properties such as the yield strength and Poisson’s ratio. In addition, various coating materials could be examined by means of these nanoindentation simulations, as well the effects of those parameters that could not be controlled experimentally, such as the geometry of the indenter and the bonding between the coating and the substrate. The simulations were carried out using the ANSYS Mechanical APDL software. The mechanical properties such as the Young’s modulus, yield strength, Poisson’s ratio and tangent modulus were 370 GPa, 19 GPa, 0.21 and 10 GPa, respectively for the TiAlN coating and 460 GPa, 14 GPa, 0.25 and 8 GPa, respectively for the TiN coating. The difference between the mechanical properties obtained from the simulations and experiments was less than 5 %.

The Effect of 555-777 Defect on Mechanical Properties of Graphene Nanoribbon

2021 ◽  
Vol 1032 ◽  
pp. 67-72
Author(s):  
Xiao Fei Ma ◽  
Xue Mei Sun ◽  
Rui Wang ◽  
Shuai Li
Keyword(s):  
Mechanical Properties ◽  
Young’S Modulus ◽  
Fracture Strength ◽  
Fracture Strain ◽  
Graphene Nanoribbons ◽  
Young's Modulus ◽  
Simulation Results ◽  
Armchair Graphene Nanoribbons ◽  
Dynamics Simulations ◽  
Zigzag Graphene Nanoribbons

In this study, the effects of 555-777 defect on Young’s modulus, fracture strength and fracture strain of armchair graphene nanoribbons (AGNRs) and zigzag graphene nanoribbons (ZGNRs) were investigated by using Molecular Dynamics simulations under uniaxial tension. The simulation results show that 555-777 defect significantly reduces the fracture strength and fracture strain of AGNRs and ZGNRs, but has little effect on Young's modulus. The influence of 555-777 defect on the mechanical properties of AGNRs is greater than that of ZGNRs. This study provides a better understanding of mechanical properties of graphene nanoribbons.

Evaluation of Young's Modulus and Yield Strength of Thin Film Structural Material Using Nanoindentation Technique

1999 ◽  
Vol 562 ◽  
Author(s):  
Dongil Son ◽  
Yun-Hee Lee ◽  
Jeong-Hoon Ahn ◽  
Dongil Kwon
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Yield Strength ◽  
Film Thickness ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Surface Condition ◽  
Sensors And Actuators ◽  
Elastic Range ◽  
Silicon Bulk

ABSTRACTAluminum films have wide applications in micromechanical devices such as micro sensors and actuators. Therefore, their mechanical properties are very important for reliability evaluation. However, there is no standardized method to evaluate the mechanical properties of the materials used in MEMS(microelectromechanical system) devices since the measured mechanical properties are influenced by many factors such as the surface condition of materials, intrinsic limit of the measurement device, etc. Hence, it was intended to evaluate the mechanical properties of thin film, which is important in its mechanical operation. Because MEMS devices are usually operated in the elastic range, Young's modulus and yield strength were evaluated by using a microcantilever beam technique. First, A1 cantilever beams were fabricated using the silicon bulk micromachining technology to have various film thicknesses. The load-displacement curves during beam bending by nanoindentation method were then obtained. The linear relationship of the curve in elastic range was utilized in deriving Young's modulus of the A1 film, which gave reproducible results regardless of film thickness. In the high load range, the deviation from the linear relation was detected, so that yield strength of A1 film could be evaluated. It was found that the yield strength increases with decreasing film thickness. By applying the misfit dislocation theory and the Hall-Petch relationship, the theoretical estimation could predict the trend of yield strength.

scholarly journals Analysis of Tensile Strength, Hardness and Impact Energy of SAE1040 Steel Using Heat Treatment Processes

2020 ◽  
Vol 18 (02) ◽  
pp. 33-37
Author(s):  
Qadir Bakhsh Jamali ◽  
Muswar Ali Farhad Siyal ◽  
Abdul Sattar Jamali ◽  
Muhammad Sharif Jamali ◽  
Arshad Hussain ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Tensile Strength ◽  
Yield Strength ◽  
Young’S Modulus ◽  
Impact Energy ◽  
Breaking Strength ◽  
Young's Modulus ◽  
Medium Carbon Steel ◽  
Treatment Processes

A systematic study was carried out to improve the mechanical properties of medium carbon steel grade SAE 1040 by heat treatment processes. Test specimen were prepared according to ASTM standards. Test specimen were heat treated in Gas furnace at austenitization temperature of 700C to obtain fully austenite structure, soaked for 90 minutes, cooled in air and furnace, and quenched in water separately. Mechanical properties such as hardness, tensile strength, yield strength, breaking strength, Young’s Modulus, elongation and impact energy were investigated in this study. It was observed that water quenching enhances materials’ hardness, tensile strength, yield strength, breaking strength and Young’s Modulus while reducing the elongation and impact energy as compared with untreated specimen. Furnace cooling decreases materials’ hardness, tensile strength, yield strength, breaking strength, Young’s Modulus while increasing the elongation and impact energy as compared with untreated specimen. Air cooling improved the materials’ mechanical properties such as hardness, tensile strength, yield strength, breaking strength, Young’s Modulus, elongation and impact energy as compared with untreated specimen. The results of this study show that the heat treatment technique greatly influences the mechanical properties of medium carbon steel grade SAE 1040.

Sign in / Sign up

Export Citation Format

Share Document