A Calorimetric Evaluation of Peel Adhesion

1993 ◽  
Vol 309 ◽  
Author(s):  
Richard. J. Farris ◽  
Jay. L. Goldfarb
Keyword(s):  
Internal Energy ◽  
Adhesive Layer ◽  
Solution Calorimetry ◽  
Thermomechanical Analysis ◽  
Deformation Energy ◽  
Pressure Sensitive Adhesive ◽  
Scanning Calorimetry ◽  
Tensile Drawing ◽  
Deformation Calorimetry ◽  
Pet Film

AbstractPeeling of flexible poly(ethylene terephthalate), PET, and elastic steel films, adhesively bonded with a pressure sensitive adhesive layer, was analyzed from a thermodynamic perspective with the intent of determining how the energy expended in separating the bonded materials is consumed. The mechanical work expended and the heat dissipated during peeling were simultaneously measured using deformation calorimetry. For the PET backing material, which has a demonstrated capacity to store deformation energy as latent internal energy, most, but not all, of the peel energy was dissipated as heat. When perfectly elastic steel films were peeled, all of the peel energy was dissipated as heat, proving that no latent internal energy is stored in the adhesive layer during peeling and suggesting that the internal energy change of peeling adhesive backed with PET film was stored as latent internal energy in the PET backing. The stored latent internal energy in the peeled PET was measured using solution calorimetry. The thermodynamics of tensile drawing for PET was studied using deformation calorimetry, solution calorimetry, differential scanning calorimetry and thermomechanical analysis.

scholarly journals The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 890
Author(s):  
Mateusz Barczewski ◽  
Olga Mysiukiewicz ◽  
Aleksander Hejna ◽  
Radosław Biskup ◽  
Joanna Szulc ◽  
...  
Keyword(s):  
Impact Strength ◽  
Mechanical Stability ◽  
Thermomechanical Analysis ◽  
Thermomechanical Properties ◽  
Phenyl Isocyanate ◽  
Sem Analysis ◽  
Scanning Calorimetry ◽  
Melt Mixing ◽  
Expanded Vermiculite ◽  
Chain Extenders

In this work, thermally expanded vermiculite (TE-VMT) was surface modified and used as a filler for composites with a polylactide (PLA) matrix. Modification of vermiculite was realized by simultaneous ball milling with the presence of two PLA chain extenders, aromatic carbodiimide (KI), and 4,4’-methylenebis(phenyl isocyanate) (MDI). In addition to analyzing the particle size of the filler subjected to processing, the efficiency of mechanochemical modification was evaluated by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The composites of PLA with three vermiculite types were prepared by melt mixing and subjected to mechanical, thermomechanical, thermal, and structural evaluation. The structure of composites containing a constant amount of the filler (20 wt%) was assessed using FTIR spectroscopy and SEM analysis supplemented by evaluating the final injection-molded samples’ physicochemical properties. Mechanical behavior of the composites was assessed by static tensile test and impact strength hardness measurements. Heat deflection temperature (HDT) test and dynamic thermomechanical analysis (DMTA) were applied to evaluate the influence of the filler addition and its functionalization on thermomechanical properties of PLA-based composites. Thermal properties were assessed by differential scanning calorimetry (DSC), pyrolysis combustion flow calorimetry (PCFC), and thermogravimetric analysis (TGA). The use of filler-reactive chain extenders (CE) made it possible to change the vermiculite structure and obtain an improvement in interfacial adhesion and more favorable filler dispersions in the matrix. This translated into an improvement in impact strength and an increase in thermo-mechanical stability and heat release capacity of composites containing modified vermiculites.

scholarly journals Films Based on a Blend of PVC with Copolymer of 3-Hydroxybutyrate with 3-Hydroxyhexanoate

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 270
Author(s):  
Evgeniy V. Belukhichev ◽  
Vera E. Sitnikova ◽  
Evgenia O. Samuylova ◽  
Mayya V. Uspenskaya ◽  
Daria M. Martynova
Keyword(s):  
Thermal Analysis ◽  
Differential Scanning Calorimetry ◽  
Environmental Pollution ◽  
Polyvinyl Chloride ◽  
Polymer Films ◽  
Thermomechanical Analysis ◽  
Packaging Materials ◽  
Packaging Film ◽  
Scanning Calorimetry ◽  
Environmental Friendliness

Polymeric packaging materials are one of the factors of environmental pollution. Reducing the environmental burden is possible by increasing the environmental friendliness of packaging materials. In this work, we study polymer films based on polyvinyl chloride (PVC) with a copolymer of 3-hydroxybutyrate with 3-hydroxyhexanoate P (3-GB) (3-GG) with different component ratios. The process of processing blends in the process of obtaining a packaging film is considered. The optical characteristics of the obtained films are determined. Thermal analysis of the obtained films was carried out using the differential scanning calorimetry (DSC), TGA, and thermomechanical analysis (TMA) methods. The degree of gelling of the resulting mixture was determined. It is shown that PHB has miscibility with PVC.

scholarly journals Mechanics of an adhesive tape in a zero degree peel test: effect of large deformation and material nonlinearity

Soft Matter ◽  
2018 ◽  
Vol 14 (47) ◽  
pp. 9681-9692 ◽  
Author(s):  
Chung-Yuen Hui ◽  
Zezhou Liu ◽  
Helen Minsky ◽  
Costantino Creton ◽  
Matteo Ciccotti
Keyword(s):  
Large Deformation ◽  
Peel Test ◽  
Adhesive Layer ◽  
Material Nonlinearity ◽  
Adhesive Tape ◽  
Pressure Sensitive Adhesive ◽  
Pressure Sensitive ◽  
Zero Degree ◽  
The Common ◽  
Backing Layer

The common pressure sensitive adhesive (PSA) tape is a composite consisting of a stiff backing layer and a soft adhesive layer.

scholarly journals Improved high-temperature damping performance of nitrile-butadiene rubber/phenolic resin composites by introducing different hindered amine molecules

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 482-490
Author(s):  
Meng Song ◽  
Xiulin Yue ◽  
Xiujuan Wang ◽  
Mengjie Huang ◽  
Mingxing Ma ◽  
...  
Keyword(s):  
High Temperature ◽  
Phenolic Resin ◽  
Thermomechanical Analysis ◽  
Butadiene Rubber ◽  
Scanning Calorimetry ◽  
Nitrile Butadiene Rubber ◽  
Theoretical Support ◽  
Higher Temperature ◽  
Damping Materials ◽  
Hybrid Damping

AbstractBy introducing hindered amine GW-622 or GW-944 into nitrile-butadiene rubber/phenolic resin (NBR/PR, abbreviated as NBPR) matrix, we have prepared different hindered amine/NBR/PR ternary hybrid damping materials with high-temperature damping performance, respectively. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and dynamic thermomechanical analysis (DMA) were used to research the microstructure, compatibility, and damping properties of the hindered amine/NBPR composites. FTIR results indicate that hydrogen bonds are formed between the hindered amine and the NBPR matrix. Both DSC and SEM results show that hindered amine has partial compatibility with the NBPR matrix. DMA results show that two loss peaks appear in the hindered amine/NBPR composite. Thereby, the composites show better damping performance at a higher temperature, and the temperature domain of high-temperature damping becomes wider with the increase in the addition of hindered amine. This study provides a theoretical support for the preparation of high-temperature damping materials.

Effects of Steam Heat and Dry Heat Sterilization on Thermal and Mechanical Properties of Nylon and Policarbonate in Fabrication with Fused Filament

2021 ◽  
Vol 891 ◽  
pp. 150-163
Author(s):  
Jorge Mauricio Fuentes ◽  
Omar Flor Unda ◽  
Santiago Ferrandiz ◽  
Franyelit Suarez
Keyword(s):  
Mechanical Properties ◽  
Thermomechanical Analysis ◽  
Mechanical Tests ◽  
Effect Of Temperature ◽  
Mechanical And Thermal Properties ◽  
Scanning Calorimetry ◽  
Thermal Tests ◽  
Dry Heat ◽  
Izod Impact ◽  
Steam Heat

In this article presents evidence about performance of mechanical properties of polycarbonate and nylon materials, which are used in the additive manufacturing by deposition of molten material and that have been subjected to sterilization processes by moist heat at 121°C and dry heat at 140°C. This study provides useful information to consider the use of these materials in sanitary and sterile settings. Mechanical tests of tensile, flex, hardness, Izod impact, thermal tests in Differential Scanning Calorimetry DSC, Thermomechanical analysis TMA and Scanning Electron Microscopy SEM were performed. It is concluded that the mechanical and thermal properties have not been altered through the effect of temperature in sterilization processes.

scholarly journals Adhesive Performance of Acrylic Pressure-Sensitive Adhesives from Different Preparation Processes

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2627
Author(s):  
Irene Márquez ◽  
Núria Paredes ◽  
Felipe Alarcia ◽  
José Ignacio Velasco
Keyword(s):  
Average Particle Size ◽  
Gel Permeation Chromatography ◽  
Shear Resistance ◽  
Deformation Energy ◽  
Average Particle ◽  
Scanning Calorimetry ◽  
Pressure Sensitive Adhesives ◽  
Pressure Sensitive ◽  
Monomeric Composition ◽  
Adhesive Performance

A series of pressure-sensitive adhesives (PSAs) was prepared using a constant monomeric composition and different preparation processes to investigate the best combination to obtain the best balance between peel resistance, tack, and shear resistance. The monomeric composition was a 1:1 combination of two different water-based acrylic polymers—one with a high shear resistance (A) and the other with a high peel resistance and tack (B). Two different strategies were applied to prepare the adhesives: physical blending of polymers A and B and in situ emulsion polymerization of A + B, either in one or two steps; in this last case, by polymerizing A or B first. To characterize the polymer, the average particle size and viscosity were analyzed. The glass transition temperature (Tg) was determined by differential scanning calorimetry (DSC). The tetrahydrofuran (THF) insoluble polymer fraction was used to calculate the gel content, and the soluble part was used to determine the average sol molecular weight by means of gel permeation chromatography (GPC). The adhesive performance was assessed by measuring tack as well as peel and shear resistance. The mechanical properties were obtained by calculating the shear modulus and determination of maximum stress and the deformation energy. Moreover, an adhesive performance index (API) was designed to determine which samples are closest to the requirements demanded by the self-adhesive label market.

scholarly journals Development and Characterization of Sustainable Composites from Bacterial Polyester Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate) and Almond Shell Flour by Reactive Extrusion with Oligomers of Lactic Acid

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1097 ◽  
Author(s):  
Juan Ivorra-Martinez ◽  
Jose Manuel-Mañogil ◽  
Teodomiro Boronat ◽  
Lourdes Sanchez-Nacher ◽  
Rafael Balart ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Mechanical Characterization ◽  
Linear Thermal Expansion ◽  
Reactive Extrusion ◽  
Thermomechanical Analysis ◽  
Almond Shell ◽  
Scanning Calorimetry ◽  
Filler Reinforcement ◽  
Lignocellulosic Filler

Eco-efficient Wood Plastic Composites (WPCs) have been obtained using poly(hydroxybutyrate-co-hexanoate) (PHBH) as the polymer matrix, and almond shell flour (ASF), a by-product from the agro-food industry, as filler/reinforcement. These WPCs were prepared with different amounts of lignocellulosic fillers (wt %), namely 10, 20 and 30. The mechanical characterization of these WPCs showed an important increase in their stiffness with increasing the wt % ASF content. In addition, lower tensile strength and impact strength were obtained. The field emission scanning electron microscopy (FESEM) study revealed the lack of continuity and poor adhesion among the PHBH-ASF interface. Even with the only addition of 10 wt % ASF, these green composites become highly brittle. Nevertheless, for real applications, the WPC with 30 wt % ASF is the most attracting material since it contributes to lowering the overall cost of the WPC and can be manufactured by injection moulding, but its properties are really compromised due to the lack of compatibility between the hydrophobic PHBH matrix and the hydrophilic lignocellulosic filler. To minimize this phenomenon, 10 and 20 phr (weight parts of OLA-Oligomeric Lactic Acid per one hundred weight parts of PHBH) were added to PHBH/ASF (30 wt % ASF) composites. Differential scanning calorimetry (DSC) suggested poor plasticization effect of OLA on PHBH-ASF composites. Nevertheless, the most important property OLA can provide to PHBH/ASF composites is somewhat compatibilization since some mechanical ductile properties are improved with OLA addition. The study by thermomechanical analysis (TMA), confirmed the increase of the coefficient of linear thermal expansion (CLTE) with increasing OLA content. The dynamic mechanical characterization (DTMA), revealed higher storage modulus, E’, with increasing ASF. Moreover, DTMA results confirmed poor plasticization of OLA on PHBH-ASF (30 wt % ASF) composites, but interesting compatibilization effects.

scholarly journals Thermodynamics of formation of coffinite, USiO4

2015 ◽  
Vol 112 (21) ◽  
pp. 6551-6555 ◽  
Author(s):  
Xiaofeng Guo ◽  
Stéphanie Szenknect ◽  
Adel Mesbah ◽  
Sabrina Labs ◽  
Nicolas Clavier ◽  
...  
Keyword(s):  
Enthalpy Of Formation ◽  
Spent Nuclear Fuel ◽  
Solution Calorimetry ◽  
Standard Enthalpy Of Formation ◽  
Spectrometric Analysis ◽  
Hydrothermal Conditions ◽  
Scanning Calorimetry ◽  
Oxide Melt ◽  
Two Samples ◽  
High Temperature Oxide

Coffinite, USiO4, is an important U(IV) mineral, but its thermodynamic properties are not well-constrained. In this work, two different coffinite samples were synthesized under hydrothermal conditions and purified from a mixture of products. The enthalpy of formation was obtained by high-temperature oxide melt solution calorimetry. Coffinite is energetically metastable with respect to a mixture of UO2 (uraninite) and SiO2 (quartz) by 25.6 ± 3.9 kJ/mol. Its standard enthalpy of formation from the elements at 25 °C is −1,970.0 ± 4.2 kJ/mol. Decomposition of the two samples was characterized by X-ray diffraction and by thermogravimetry and differential scanning calorimetry coupled with mass spectrometric analysis of evolved gases. Coffinite slowly decomposes to U3O8 and SiO2 starting around 450 °C in air and thus has poor thermal stability in the ambient environment. The energetic metastability explains why coffinite cannot be synthesized directly from uraninite and quartz but can be made by low-temperature precipitation in aqueous and hydrothermal environments. These thermochemical constraints are in accord with observations of the occurrence of coffinite in nature and are relevant to spent nuclear fuel corrosion.

Sign in / Sign up

Export Citation Format

Share Document