Correlation of 137Cs Release From Small-Scale to Large-Scale Cement Waste Forms

1982 ◽  
Vol 15 ◽  
Author(s):  
Nabil Morcos ◽  
Ramesh Dayal ◽  
Laurence Milian ◽  
Philip Hayde ◽  
Allen J. Weiss
Keyword(s):  
Large Scale ◽  
Calculated Data ◽  
Free Water ◽  
Small Scale ◽  
Infinite Plane ◽  
Cement Ratio ◽  
Waste Forms ◽  
Water To Cement Ratio ◽  
Exchange Resins ◽  
Acid Waste

ABSTRACTA study correlating the leachability of 137 Cs from small-scale to large-scale cement forms was performed. The waste forms consisted of (a) organic ion exchange resins incorporated in Portland I cement, with a waste-to-cement ratio of 0.6 and a water-to-cement ratio of 0.4 (as free water) and (b) boric acid waste (12% solution) incorporated in Portland III cement, with a waste-to-cement ratio of 0.7. 137Cs was added to both waste types prior to solidification. The sample dimensions varied from 1 in. ×1 in. to 22 in. × 22 in. (diameter × height). Leach data extending over a period of 260 days were obtained using a modified IAEA leach test. A method based on semi-infinite plane source diffusion model was applied to interpret the leach data, which allows prediction of the amount of 137Cs leached from the forms as a function of leaching time and waste form dimensions. A reasonably good agreement between the experimental and calculated data was obtained for both types of cement waste forms.

scholarly journals Effects of Water Content and Temperature on Bulk Resistivity of Hybrid Cement/Carbon Nanofiber Composites

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2884 ◽  
Author(s):  
Kamila Gawel ◽  
Mohammad Ali Taghipour Khadrbeik ◽  
Ruben Bjørge ◽  
Sigurd Wenner ◽  
Bartlomiej Gawel ◽  
...  
Keyword(s):  
Ambient Temperature ◽  
Carbon Nanofiber ◽  
Water Saturation ◽  
Free Water ◽  
Bulk Resistivity ◽  
Water Release ◽  
Temperature Changes ◽  
Cement Ratio ◽  
Sensing Applications ◽  
Water To Cement Ratio

Cement nanocomposites with carbon nanofibers (CNFs) are electrically conductive and sensitive to mechanical loads. These features make them useful for sensing applications. The conductive and load sensing properties are well known to be dependent on carbon nanofiber content; however, much less is known about how the conductivity of hybrid cement–CNF depend on other parameters (e.g., water to cement ratio (w/c), water saturation of pore spaces and temperatures above ambient temperature). In this paper we fill-in these knowledge gaps by: (1) determining a relationship between the cement–CNF bulk resistivity and w/c ratio; (2) determining the effect of water present in the pores on bulk resistivity; (3) describing the resistivity changes upon temperature changes up to 180 °C. Our results show that the increase in the water to cement ratio results in increased bulk resistivity. The decrease in nanocomposite resistivity upon a stepwise temperature increase up to 180 °C was found to be related to free water release from cement pores and the dry materials were relatively insensitive to temperature changes. The re-saturation of pores with water was not reversible with respect to electrical resistivity. The results also suggest that the change in the type of electrical connection can lead to two orders of magnitude different bulk resistivity results for the same material. It is expected that the findings from this paper will contribute to application of cement–CNF-based sensors at temperatures higher than ambient temperature.

scholarly journals Bridge Decks: Mitigation of Cracking and Increased Durability—Materials Solution (Phase III)

2020 ◽  
Author(s):  
Robin Deb ◽  
◽  
Paramita Mondal ◽  
Ardavan Ardeshirilajimi ◽  
◽  
...  
Keyword(s):  
Mitigation Strategies ◽  
Phase Iii ◽  
Small Scale ◽  
Compatibility Study ◽  
Lightweight Aggregates ◽  
Conventional Concrete ◽  
Cement Ratio ◽  
Type K ◽  
Water To Cement Ratio ◽  
Significant Difference

Type K cement offers a lower slump than conventional concrete, even at a higher water-to-cement ratio. Therefore, a suitable chemical admixture should be added to the Type K concrete mix design at a feasible dosage to achieve and retain target slump. In this project, a compatibility study was performed for Type K concrete with commercially available water-reducing and air-entraining admixtures. Slump and air content losses were measured over a period of 60 minutes after mixing and a particular mid-range water-reducing admixture was found to retain slump effectively. Furthermore, no significant difference in admixture interaction between conventional and Type K concrete was observed. Another concern regarding the use of Type K concrete is that its higher water-to-cement ratio can potentially lead to higher permeability and durability issues. This study also explored the effectiveness of presoaked lightweight aggregates in providing extra water for Type K hydration without increasing the water-to-cement ratio. Permeability of concrete was measured to validate that the use of presoaked lightweight aggregates can lower water adsorption in Type K concrete, enhancing its durability. Extensive data analysis was performed to link the small-scale material test results with a structural test performed at Saint Louis University. A consistent relation was established in most cases, validating the effectiveness of both testing methods in understanding the performance of proposed shrinkage-mitigation strategies. Stress analysis was performed to rank the mitigation strategies. Type K incorporation is reported to be the most effective method for shrinkage-related crack mitigation among the mixes tested in this study. The second-best choice is the use of Type K in combination with either presoaked lightweight aggregates or shrinkage-reducing admixtures. All mitigation strategies tested in this work were proved to be significantly better than using no mitigation strategy.

Small-Scale Science to Large-Scale Profession

2000 ◽  
Vol 45 (4) ◽  
pp. 396-398
Author(s):  
Roger Smith
Keyword(s):  
Large Scale ◽  
Small Scale

Development of Physics Learning Module Based on Guided Inquiry with Light Wave Material in Class XI of Senior High School

2020 ◽  
Vol 1 (1) ◽  
pp. 1-10
Author(s):  
Evi Rahmawati ◽  
Irnin Agustina Dwi Astuti ◽  
N Nurhayati
Keyword(s):  
Large Scale ◽  
Learning Strategy ◽  
Student Response ◽  
Average Score ◽  
Small Scale ◽  
Design Development ◽  
Teacher Response ◽  
Student Responses ◽  
Analysis Design ◽  
Scientific Skills

IPA Integrated is a place for students to study themselves and the surrounding environment applied in daily life. Integrated IPA Learning provides a direct experience to students through the use and development of scientific skills and attitudes. The importance of integrated IPA requires to pack learning well, integrated IPA integration with the preparation of modules combined with learning strategy can maximize the learning process in school. In SMP 209 Jakarta, the value of the integrated IPA is obtained from 34 students there are 10 students completed and 24 students are not complete because they get the value below the KKM of 68. This research is a development study with the development model of ADDIE (Analysis, Design, Development, Implementation, and Evaluation). The use of KPS-based integrated IPA modules (Science Process sSkills) on the theme of rainbow phenomenon obtained by media expert validation results with an average score of 84.38%, average material expert 82.18%, average linguist 75.37%. So the average of all aspects obtained by 80.55% is worth using and tested to students. The results of the teacher response obtained 88.69% value with excellent criteria. Student responses on a small scale acquired an average score of 85.19% with highly agreed criteria and on the large-scale student response gained a yield of 86.44% with very agreed criteria. So the module can be concluded receiving a good response by the teacher and students.

Planetary gentrification and urban (re)development

2019 ◽  
Vol 61 (1) ◽  
pp. 5-13 ◽  
Author(s):  
Loretta Lees
Keyword(s):  
Low Income ◽  
Policy Making ◽  
Large Scale ◽  
Urban Redevelopment ◽  
Urban Transformation ◽  
Small Scale ◽  
Income Groups ◽  
Low Income Groups

Abstract Gentrification is no-longer, if it ever was, a small scale process of urban transformation. Gentrification globally is more often practised as large scale urban redevelopment. It is state-led or state-induced. The results are clear – the displacement and disenfranchisement of low income groups in favour of wealthier in-movers. So, why has gentrification come to dominate policy making worldwide and what can be done about it?

AGRICULTURAL PRODUCTION OF CA DONG PEOPLE IN RESETTLEMENT AREA OF TRANH RIVER HYDROPOWER NUMBER 2: CURRENT SITUATION AND IMPACT FACTORS

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Bùi Thị Bích Lan
Keyword(s):  
Social Relations ◽  
Agricultural Production ◽  
Large Scale ◽  
Transition Process ◽  
Impact Factors ◽  
Small Scale ◽  
Scale Production ◽  
Technical Application ◽  
Production Models ◽  
Role Of The State

In Vietnam, the construction of hydropower projects has contributed significantly in the cause of industrialization and modernization of the country. The place where hydropower projects are built is mostly inhabited by ethnic minorities - communities that rely primarily on land, a very important source of livelihood security. In the context of the lack of common productive land in resettlement areas, the orientation for agricultural production is to promote indigenous knowledge combined with increasing scientific and technical application; shifting from small-scale production practices to large-scale commodity production. However, the research results of this article show that many obstacles in the transition process are being posed such as limitations on natural resources, traditional production thinking or the suitability and effectiveness of scientific - technical application models. When agricultural production does not ensure food security, a number of implications for people’s lives are increasingly evident, such as poverty, preserving cultural identity, social relations and resource protection. Since then, it has set the role of the State in researching and building appropriate agricultural production models to exploit local strengths and ensure sustainability.

Managing the impacts of mining on Ghana’s water resources from a legal perspective

2018 ◽  
Vol 1 (3) ◽  
pp. 156-165 ◽  
Author(s):  
Nasirudeen Abdul Fatawu
Keyword(s):  
Surface Water ◽  
Water Resources ◽  
Environmental Protection Agency ◽  
Large Scale ◽  
Small Scale ◽  
Mining Activities ◽  
Protection Agency ◽  
Environmental Laws ◽  
Mining Areas ◽  
Legal Perspective

Recent floods in Ghana are largely blamed on mining activities. Not only are lives lost through these floods, farms andproperties are destroyed as a result. Water resources are diverted, polluted and impounded upon by both large-scale minersand small-scale miners. Although these activities are largely blamed on behavioural attitudes that need to be changed, thereare legal dimensions that should be addressed as well. Coincidentally, a great proportion of the water resources of Ghana arewithin these mining areas thus the continual pollution of these surface water sources is a serious threat to the environmentand the development of the country as a whole. The environmental laws need to be oriented properly with adequate sanctionsto tackle the impacts mining has on water resources. The Environmental Impact Assessment (EIA) procedure needs to bestreamlined and undertaken by the Environmental Protection Agency (EPA) and not the company itself.

RANCANG BANGUN PERANGKAT EKSPERIMENTASI PROSES PIROLISIS BIOMASA GELOMBANG MIKRO

2013 ◽  
Vol 14 (2) ◽  
Author(s):  
Noor Fachrizal
Keyword(s):  
Large Scale ◽  
Continuous Model ◽  
Biomass Energy ◽  
Scale Model ◽  
Small Scale ◽  
Laboratory Apparatus ◽  
Liquid Form ◽  
Large Scale Model ◽  
Bio Oil ◽  
Pyrolysis Of Biomass

Biomass such as agriculture waste and urban waste are enormous potency as energy resources instead of enviromental problem. organic waste can be converted into energy in the form of liquid fuel, solid, and syngas by using of pyrolysis technique. Pyrolysis process can yield higher liquid form when the process can be drifted into fast and flash response. It can be solved by using microwave heating method. This research is started from developing an experimentation laboratory apparatus of microwave-assisted pyrolysis of biomass energy conversion system, and conducting preliminary experiments for gaining the proof that this method can be established for driving the process properly and safely. Modifying commercial oven into laboratory apparatus has been done, it works safely, and initial experiments have been carried out, process yields bio-oil and charcoal shortly, several parameters are achieved. Some further experiments are still needed for more detail parameters. Theresults may be used to design small-scale continuous model of productionsystem, which then can be developed into large-scale model that applicable for comercial use.

Sign in / Sign up

Export Citation Format

Share Document