The study of Thermal Resistant Enhancement of Siloxane-Modified LED Transparent Encapsulants

2007 ◽  
Vol 1007 ◽  
Author(s):  
Kai-Chi Chen ◽  
Chia-Wen Hsu ◽  
Hsun-Tien Li
Keyword(s):  
Thermal Resistance ◽  
High Performance ◽  
Diglycidyl Ether ◽  
Thermal Treatments ◽  
Curing Agent ◽  
C Storage ◽  
Yellow Index ◽  
Modified Epoxy ◽  
Mean Time

ABSTRACTThermal resistant property of siloxane-modified epoxy compositions designed for long-term and high temperature storage was investigated. In this study, we developed two siloxane-modified epoxy compositions to improve the thermal stability of current epoxy encapsulants. One composition contained silicone epoxy, and the other one was cyclic aliphatic siloxane dianhydride.We selected triglycidyl ether terminated Phenylmethylsiloxnae-co-dimethylsiloxne (GT-1000), which was compatible with the diglycidyl ether of bisphenol A epoxy (Epon-828), to partial replaced the epoxy resin and was cured by liquid anhydride (MHHPA). In the mean time, we also synthesized 5, 5'-(1, 1, 3, 3-tetramethyl disiloxane-1, 3-dilyl)-bis-norborane-2, 3-dicarboxylic anhydride (A1) as a co-curing agent to cure Epon-828.The thermal resistance was studied by measuring the increase of yellow index (ΔYI) after thermal treatments. In 110 °C storage experiment for 1000 h, the ΔYI of GT-1000 0.2 equivalent was 1.51, whereas Epon-828/MHHPA (Comp 1) was 6.74. Moreover, The ΔYI of the composition with higher equivalent GT-1000 was only 2.15 after 2000 hours thermal aging. In the cyclic aliphatic siloxane dianhydride co-curing compositions, when A1 was 0.05 and 0.1 equivalent, the ΔYI was 2.28 and 0.72 after 1000 h, respectively. Compared with Comp 1, both GT-1000 and A1 were effective for thermal resistance.In IR-reflow test, the ΔYI of GT-1000/Epon-828/MHHPA= 0.5/0.5/1 was 0.65 and that of Epon-828/MHHPA was 1.49 after 260 °C for 10 seconds. The results revealed that either the siloxane-modified epoxy or siloxane-modified curing agent had excellent thermal resistant property for high performance LED applications.

Survival and Thermal Resistance of Salmonella Enteritidis PT 30 on Almonds after Long-Term Storage

2019 ◽  
Vol 82 (2) ◽  
pp. 194-199 ◽  
Author(s):  
PICHAMON LIMCHAROENCHAT ◽  
MICHAEL K. JAMES ◽  
BRADLEY P. MARKS
Keyword(s):  
Thermal Resistance ◽  
Water Activity ◽  
Salmonella Enteritidis ◽  
Thermal Treatments ◽  
Long Term Storage ◽  
Group I ◽  
Log Linear ◽  
Term Storage ◽  
Salmonella Survival

ABSTRACT Salmonella survival and thermal resistance on the surface of almond kernels were evaluated after periods of storage. Almond kernels were inoculated with Salmonella Enteritidis PT 30 and equilibrated to 0.45 water activity. Samples were separated into two groups (I and II) and stored in sealed metal cans at room temperature. Group I samples (stored 7, 15, 27, and 68 weeks) were re-equilibrated in controlled humidity chambers to 0.45 water activity before performing the thermal treatments after each storage period, but group II samples (stored 70 and 103 weeks) were thermally treated immediately after the cans were opened. For thermal treatments, individual almond kernels were vacuum sealed in thin plastic bags, heated isothermally in a water bath (80°C) for nine intervals, immediately cooled in an ice bath, and assayed for surviving Salmonella. Log-linear and Weibull models were fit to the inactivation data. Salmonella population decreased (P < 0.05) more than 2 log CFU/g during the long-term storage. Salmonella survival in group II at 70 weeks (7.3 log CFU/g) was higher (P < 0.05) than in group I (which had been re-equilibrated multiple times) at 68 weeks (6.2 log CFU/g). However, the thermal resistance of Salmonella Enteritidis PT 30 did not decrease (P > 0.05) for up to 68 weeks of storage, and the log-linear model best described the thermal inactivation data. Overall, the results suggest that re-equilibrating almonds (group I) multiple times may have increased the rate of reduction of Salmonella populations during long-term storage. However, Salmonella thermal resistance on almonds appears to be essentially unaffected by long-term storage, which is important information for designing and conducting validation studies for pathogen control processes.

Toughening of Epoxy Resin Modified with In Situ Polymerized Acrylate Copolymer

2014 ◽  
Vol 910 ◽  
pp. 70-73
Author(s):  
Tao Wang ◽  
Jun Wang ◽  
Bin Zhang
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
High Performance ◽  
In Situ Polymerization ◽  
Weight Ratio ◽  
Diglycidyl Ether ◽  
Resin System ◽  
Acrylate Copolymer ◽  
Modified Epoxy

P(BA-St), a good modifier for epoxy resin, was prepared by BA and St in situ polymerization. The modified resin system was based on diglycidyl ether of bisphenol and methyl tetrahydrophthalic anhydride, tris (dimethylaminomethyl) phenol. The influence of the copolymer on mechanical properties and thermal performance of the systems was studied. When 15 wt% of the BA/St with a weight ratio composition of 7.5/7.5 was added to epoxy, high performance modified epoxy resin was obtained.

Deep eutectic solvent for curing of phthalonitrile resin: Lower the curing temperature but improve the properties of thermosetting

2020 ◽  
pp. 095400832097215
Author(s):  
Yu Qi ◽  
Zhihuan Weng ◽  
Ce Song ◽  
Yue Hu ◽  
Xin Liu ◽  
...  
Keyword(s):  
High Performance ◽  
Oxidation Stability ◽  
Deep Eutectic Solvent ◽  
Curing Temperature ◽  
Molar Ratio ◽  
Curing Agent ◽  
Curing Process ◽  
Curing Time ◽  
Functional Pathway

Long curing duration and high curing temperature are commonly known to restrict the application of the phthalonitrile resin. In this study, a deep eutectic solvent (DES) containing ZnCl2 and urea has been developed to improve the curing process of the resorcinol-based phthalonitrile resin (DPPh) without sacrificing the useful properties of the resin. For the molar ratio of ZnCl2 and urea as 1:1 (ZnCl2-urea (1–1)), the initial curing temperature and apparent activation energy of the system were recorded as 179.5°C and 90.1 kJ/mol, respectively, indicating a reduction of 31.2% and 39.0% as compared to the pristine ZnCl2 system. More importantly, with curing time of 6 h and post-curing temperature of 300°C, the temperature at 5% weight loss as well as glass transition temperature of the resin with DES as the curing agent were 523.1°C and 370.2°C, respectively, demonstrating a significant improvement as compared to the resin cured with ZnCl2. In addition, the satisfactory long-term oxidation stability of the resin could also be obtained by employing the new curing agent. The findings from this study open a functional pathway for facile preparation of the high-performance curing agent for the phthalonitrile resin.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Use Of Tai Chi Elements To Increase Respiratory Amplitude

2019 ◽  
pp. 11-20
Author(s):  
Mihai-Alexandru Citea ◽  
Marius Neculaes
Keyword(s):  
High Performance ◽  
Tai Chi ◽  
Sports Club ◽  
Optimal Functioning ◽  
Physiological Adaptations ◽  
Competitive Activity ◽  
Abdominal Breathing ◽  
Study Participants ◽  
Different Levels

High performance sport has a major impact on the physiological adaptations of the respiratory system. The importance of the optimal functioning of this system is essential to achieve top results in high performance sport but also in maintaining a long term health status. Science journals present numerous studies that highlight the benefits of practicing Tai Chi on the general population, with effects ranging from improving cardiac function, to influencing the immune system. The purpose of this study is to identify whether by practicing Tai Chi forms a athlete can change their breathing pattern and develop their respiratory amplitude. The subjects of the study were 22 fencing practitioners, accredited at the Iași Municipal Sports Club (C.S.M. Iași), aged between 14 and 18 years, with over 3 years of competitive activity. Materials and method: The study participants were evaluated initially and at the end of 7 months of practice. The frequency was 3 sessions per week, and the duration of each session was 20-30 minutes. The evaluation consisted in measuring the circumference of the thorax at 3 different levels: subaxillary, medial thorax (T6-T7) and lower rib (diaphragmatic) in maximal inspiration and expiration. Conclusions: A constant evolution is observed in most of the exposed cases. In cases where this evolution is not visible, a change in the breathing mode can be noticed, transforming from an upper rib breathing into a thoracic or abdominal breathing. With the exception of one case, all subjects had an improvement of the value in the lower rib level.

scholarly journals Review on Development and Dental Applications of Polyetheretherketone-Based Biomaterials and Restorations

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 408 ◽  
Author(s):  
Ludan Qin ◽  
Shuo Yao ◽  
Jiaxin Zhao ◽  
Chuanjian Zhou ◽  
Thomas W. Oates ◽  
...  
Keyword(s):  
High Performance ◽  
Dental Resin ◽  
Oral Environment ◽  
Inert Surface ◽  
Oral Implant ◽  
Long Term Performance ◽  
Dental Applications ◽  
Term Performance ◽  
Orthopedic Applications

Polyetheretherketone (PEEK) is an important high-performance thermoplastic. Its excellent strength, stiffness, toughness, fatigue resistance, biocompatibility, chemical stability and radiolucency have made PEEK attractive in dental and orthopedic applications. However, PEEK has an inherently hydrophobic and chemically inert surface, which has restricted its widespread use in clinical applications, especially in bonding with dental resin composites. Cutting edge research on novel methods to improve PEEK applications in dentistry, including oral implant, prosthodontics and orthodontics, is reviewed in this article. In addition, this article also discusses innovative surface modifications of PEEK, which are a focus area of active investigations. Furthermore, this article also discusses the necessary future studies and clinical trials for the use of PEEK in the human oral environment to investigate its feasibility and long-term performance.

Sign in / Sign up

Export Citation Format

Share Document