Nanodiamond-based Nanolubricants: Experiment and Modeling

2014 ◽  
Vol 1703 ◽  
Author(s):  
D. Brenner ◽  
Z. Mahbooba ◽  
F. Saberi-Movahed ◽  
J. Krim ◽  
Z. Liu ◽  
...  
Keyword(s):  
High Performance ◽  
Lubricant Additives ◽  
Passenger Cars ◽  
Frictional Drag ◽  
Diamond Surfaces ◽  
Engine Oils ◽  
Surface Polishing ◽  
Water Metal ◽  
Solid Liquid Interface ◽  
Solid Liquid

ABSTRACTOur recent efforts using primarily nanodiamonds as lubricant additives are discussed. For traditional high performance engine oils, our results show a reduction in friction for steel surfaces for both laboratory experiments under controlled conditions and in a pilot study of passenger cars under typical driving conditions. Examination of the surfaces suggests that surface polishing at the sub-micron scale may be responsible for these results. A separate set of experiments using a quartz crystal microbalance to measure dissipation and drag due to friction has shown that when added to water the charge of the nanodiamond acquired from surface functionalization can have a large influence on uptake and friction at the water-metal interface. More importantly, these results suggest the possibility of creating nanodiamonds with controllable frictional drag at the solid-liquid interface through surface processing. Companion simulation results for nanodiamonds in water sliding between diamond surfaces are also presented. Future possibilities for further understanding and tuning the properties of nanodiamonds as lubricant additives through synergistic experiments and modeling are also discussed.

Towards High-Performance Aqueous Sodium-Ion Batteries: Stabilizing the Solid/Liquid Interface for NASICON-Type Na2 VTi(PO4 )3 using Concentrated Electrolytes

ChemSusChem ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1382-1389 ◽  
Author(s):  
Huang Zhang ◽  
Sangsik Jeong ◽  
Bingsheng Qin ◽  
Diogo Vieira Carvalho ◽  
Daniel Buchholz ◽  
...  
Keyword(s):  
High Performance ◽  
Liquid Interface ◽  
Sodium Ion ◽  
Sodium Ion Batteries ◽  
Aqueous Sodium ◽  
Nasicon Type ◽  
Concentrated Electrolytes ◽  
Solid Liquid Interface ◽  
Solid Liquid

Atom-probe analysis of the solid-liquid interface

1995 ◽  
Vol 53 ◽  
pp. 676-677
Author(s):  
J.A. Panitz
Keyword(s):  
Molecular Level ◽  
Selective Adsorption ◽  
Electronic Devices ◽  
Atom Probe ◽  
Chemical Agent ◽  
Hostile Environment ◽  
Solid Interface ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Chemically Selective

The first few atomic layers of a solid can form a barrier between its interior and an often hostile environment. Although adsorption at the vacuum-solid interface has been studied in great detail, little is known about adsorption at the liquid-solid interface. Adsorption at a liquid-solid interface is of intrinsic interest, and is of technological importance because it provides a way to coat a surface with monolayer or multilayer structures. A pinhole free monolayer (with a reasonable dielectric constant) could lead to the development of nanoscale capacitors with unique characteristics and lithographic resists that surpass the resolution of their conventional counterparts. Chemically selective adsorption is of particular interest because it can be used to passivate a surface from external modification or change the wear and the lubrication properties of a surface to reflect new and useful properties. Immunochemical adsorption could be used to fabricate novel molecular electronic devices or to construct small, “smart”, unobtrusive sensors with the potential to detect a wide variety of preselected species at the molecular level. These might include a particular carcinogen in the environment, a specific type of explosive, a chemical agent, a virus, or even a tumor in the human body.

The role of (bio)surfactant sorption in promoting the bioavailability of nutrients localized at the solid-water interface

1999 ◽  
Vol 39 (7) ◽  
pp. 91-98 ◽  
Author(s):  
Ryan N. Jordan ◽  
Eric P. Nichols ◽  
Alfred B. Cunningham
Keyword(s):  
Mass Transfer ◽  
Cell Membrane ◽  
Substrate Concentration ◽  
Water Interface ◽  
Industrial Systems ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Surfactant Sorption

Bioavailability is herein defined as the accessibility of a substrate by a microorganism. Further, bioavailability is governed by (1) the substrate concentration that the cell membrane “sees,” (i.e., the “directly bioavailable” pool) as well as (2) the rate of mass transfer from potentially bioavailable (e.g., nonaqueous) phases to the directly bioavailable (e.g., aqueous) phase. Mechanisms by which sorbed (bio)surfactants influence these two processes are discussed. We propose the hypothesis that the sorption of (bio)surfactants at the solid-liquid interface is partially responsible for the increased bioavailability of surface-bound nutrients, and offer this as a basis for suggesting the development of engineered in-situ bioremediation technologies that take advantage of low (bio)surfactant concentrations. In addition, other industrial systems where bioavailability phenomena should be considered are addressed.

Observation of Femtosecond Acoustic Anomaly in a Solid Liquid Interface

2020 ◽  
Vol 124 (5) ◽  
pp. 2987-2993
Author(s):  
Chi-Kuang Sun ◽  
Yi-Ting Yao ◽  
Chih-Chiang Shen ◽  
Mu-Han Ho ◽  
Tien-Chang Lu ◽  
...  
Keyword(s):  
Liquid Interface ◽  
Acoustic Anomaly ◽  
Solid Liquid Interface ◽  
Solid Liquid
Sign in / Sign up

Export Citation Format

Share Document