Transmission electron microscopy analysis of secondary phases in Cu2ZnSnS4 thin film solar cells

2014 ◽  
Vol 1670 ◽  
Author(s):  
Wei Li ◽  
Ziheng Liu ◽  
Jian Chen ◽  
Fangyang Liu ◽  
Xiaojing Hao
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Solar Cell ◽  
Imaging Techniques ◽  
Secondary Phases ◽  
Transmission Electron Microscopy Analysis ◽  
Microscopy Imaging ◽  
Solar Cell Performance ◽  
Haadf Image ◽  
Transmission Electron

ABSTRACTSecondary phases are likely to occur in the Cu2ZnSnS4 (CZTS) films since the CZTS is thermodynamically stable in only a narrow region of the phase diagram. The CZTS solar cell performance can be influenced by the existence and precipitated position of secondary phases. Therefore, locally investigate the distribution of secondary phases is important to further improve CZTS solar cell efficiency. In this study, two different kinds of transmission electron microscopy imaging techniques, bright field scanning TEM image (BF-STEM) and High-angle annular dark-field (HAADF) image, are applied to analyze the distribution of secondary phases. Due to the atomic number differences between CZTS and secondary phases, secondary phases are evident in the HAADF images. Therefore, HAADF image is a more powerful and convenient method to analyze the secondary phases than the BF-STEM image.

scholarly journals Fabrication of a liquid cell for in situ transmission electron microscopy

Microscopy ◽  
2020 ◽  
Author(s):  
Xiaoguang Li ◽  
Kazutaka Mitsuishi ◽  
Masaki Takeguchi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cost Effective ◽  
Production Method ◽  
Microscopy Imaging ◽  
Transmission Electron ◽  
In Situ Electron Microscopy ◽  
Liquid Cell ◽  
Si Wafer

Abstract Liquid cell transmission electron microscopy (LCTEM) enables imaging of dynamic processes in liquid with high spatial and temporal resolution. The widely used liquid cell (LC) consists of two stacking microchips with a thin wet sample sandwiched between them. The vertically overlapped electron-transparent membrane windows on the microchips provide passage for the electron beam. However, microchips with imprecise dimensions usually cause poor alignment of the windows and difficulty in acquiring high-quality images. In this study, we developed a new and efficient microchip fabrication process for LCTEM with a large viewing area (180 µm × 40 µm) and evaluated the resultant LC. The new positioning reference marks on the surface of the Si wafer dramatically improve the precision of dicing the wafer, making it possible to accurately align the windows on two stacking microchips. The precise alignment led to a liquid thickness of 125.6 nm close to the edge of the viewing area. The performance of our LC was demonstrated by in situ transmission electron microscopy imaging of the dynamic motions of 2-nm Pt particles. This versatile and cost-effective microchip production method can be used to fabricate other types of microchips for in situ electron microscopy.

scholarly journals Annular Bright Field Scanning Transmission Electron Microscopy Imaging Dynamics

2010 ◽  
Vol 16 (S2) ◽  
pp. 80-81 ◽  
Author(s):  
SD Findlay ◽  
N Shibata ◽  
H Sawada ◽  
E Okunishi ◽  
Y Kondo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Bright Field ◽  
Microscopy Imaging ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

Extended abstract of a paper presented at Microscopy and Microanalysis 2010 in Portland, Oregon, USA, August 1 – August 5, 2010.

scholarly journals Transmission electron microscopy analysis of the crystallography of precipitates in Mg–Sn alloys aged at high temperatures

2014 ◽  
Vol 47 (5) ◽  
pp. 1729-1735 ◽  
Author(s):  
Xin Nie ◽  
Yimin Guan ◽  
Dongshan Zhao ◽  
Yu Liu ◽  
Jianian Gui ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Dark Field ◽  
Peak Hardness ◽  
Invariant Line ◽  
Orientation Relationships ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Annular Dark Field

The crystallographic orientation relationships (ORs) of precipitated β-Mg2Sn particles in Mg–9.76 wt% Sn alloy aged at 573 K for 5 h, corresponding to its peak hardness, were investigated by advanced transmission electron microscopy (TEM). OR-3 of (110)β//(0001)αand [\overline 111]β//[1\overline 210]αand OR-4 of (110)β//(0001)αand [001]β//[2\overline 1\overline 10]αare the key ORs of β-Mg2Sn particles in the alloy. The proportions of β-Mg2Sn particles exhibiting OR-3 and OR-4 were determined as 75.1 and 24.3%, respectively. Crystallographic factors determined the predominance of OR-3 in the precipitated β-Mg2Sn particles. This mechanism was analyzed by a three-dimensional invariant line model constructed using a transformation matrix in reciprocal space. Models of the interface of precipitated β-Mg2Sn and the α-Mg matrix were constructedviahigh-resolution TEM and atomic resolution high-angle annular dark-field scanning TEM.

Sign in / Sign up

Export Citation Format

Share Document