Large-scale Solution Processable Graphene-based Thin Film Devices

2012 ◽  
Vol 1407 ◽  
Author(s):  
Markus Pesonen ◽  
Himadri S. Majumdar ◽  
Jussi Kauppila ◽  
Jukka Lukkari ◽  
Ronald Österbacka
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Graphene Oxide ◽  
Electrical Transport ◽  
Large Scale ◽  
Atomic Force ◽  
Transport Studies ◽  
Reduced Graphene ◽  
Solution Processable ◽  
Thin Film Devices

ABSTRACTThe purpose of this work is to fabricate large-scale solution processable graphene-based films from graphene oxide (GO) solution and to characterize the transport properties of these films. The graphene like film is produced by annealing of the GO film to form reduced graphene oxide (rGO) thin films. The conductive rGO thin films are useable as spacer layers in spin valves and as organic electrodes. Atomic Force Microscope (AFM) characterizations on the film thickness and morphology have been carried out and simple electrical transport studies performed on spin coated rGO thin films. We have fabricated rGO thin films ranging from few to tens of nanometers in thickness with conductivities in the order of 1-100 S/m. We also show that the morphology of the films play an important role in facilitating higher conductivities for rGO thin films.

Liquid thin film dewetting-driven micropatterning of reduced graphene oxide electrodes for high performance OFETs

2019 ◽  
Vol 7 (1) ◽  
pp. 153-160 ◽  
Author(s):  
Sung Min Lee ◽  
Seung Keun Song ◽  
Seongwon Yoon ◽  
Dae Sung Chung ◽  
Suk Tai Chang
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Graphene Oxide ◽  
High Resolution ◽  
Reduced Graphene Oxide ◽  
High Performance ◽  
Oxide Electrodes ◽  
Reduced Graphene ◽  
Liquid Thin Films

High resolution micropatterning of rGO electrodes based on the dewetting of liquid thin films is presented.

scholarly journals Large Magnetoresistance and Electrical Transport Properties in Reduced Graphene Oxide Thin Film

2018 ◽  
Vol 54 (12) ◽  
pp. 1-9 ◽  
Author(s):  
Ariful Haque ◽  
Md Abdullah-Al Mamun ◽  
M. F. N. Taufique ◽  
Priyanka Karnati ◽  
Kartik Ghosh
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Transport Properties ◽  
Reduced Graphene Oxide ◽  
Electrical Transport ◽  
Oxide Thin Film ◽  
Electrical Transport Properties ◽  
Reduced Graphene

scholarly journals Photocatalytic reduction of graphene oxide with cuprous oxide film under UV-vis irradiation

2020 ◽  
Vol 59 (1) ◽  
pp. 207-214 ◽  
Author(s):  
Yao Wang ◽  
Jianqing Feng ◽  
Lihua Jin ◽  
Chengshan Li
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Low Cost ◽  
Photocatalytic Reduction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Reduced Graphene ◽  
Reduction Efficiency ◽  
Metal Organic ◽  
Reduction Effect

AbstractWe have grown Cu2O films by different routes including self-oxidation and metal-organic deposition (MOD). The reduction efficiency of Cu2O films on graphene oxide (GO) synthesized by modified Hummer’s method has been studied. Surface morphology and chemical state of as-prepared Cu2O film and GO sheets reduced at different conditions have also been investigated using atomic force microscopy (AFM) and x-ray photoelectron spectroscopy (XPS). Results show that self-oxidation Cu2O film is more effective on phtocatalytic reduction of GO than MOD-Cu2O film. Moreover, reduction effect of self-oxidation Cu2O film to GO is comparable to that of environmental-friendly reducing agent of vitamin C. The present results offer a potentially eco-friendly and low-cost approach for the manufacture of reduced graphene oxide (RGO) by photocatalytic reduction.

scholarly journals X-ray Photoelectron Spectroscopy Analysis of Chitosan–Graphene Oxide-Based Composite Thin Films for Potential Optical Sensing Applications

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 478
Author(s):  
Wan Mohd Ebtisyam Mustaqim Mohd Daniyal ◽  
Yap Wing Fen ◽  
Silvan Saleviter ◽  
Narong Chanlek ◽  
Hideki Nakajima ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Functional Group ◽  
Optical Sensing ◽  
Composite Thin Films ◽  
Cobalt Ions ◽  
X Ray ◽  
Sensing Applications

In this study, X-ray photoelectron spectroscopy (XPS) was used to study chitosan–graphene oxide (chitosan–GO) incorporated with 4-(2-pyridylazo)resorcinol (PAR) and cadmium sulfide quantum dot (CdS QD) composite thin films for the potential optical sensing of cobalt ions (Co2+). From the XPS results, it was confirmed that carbon, oxygen, and nitrogen elements existed on the PAR–chitosan–GO thin film, while for CdS QD–chitosan–GO, the existence of carbon, oxygen, cadmium, nitrogen, and sulfur were confirmed. Further deconvolution of each element using the Gaussian–Lorentzian curve fitting program revealed the sub-peak component of each element and hence the corresponding functional group was identified. Next, investigation using surface plasmon resonance (SPR) optical sensor proved that both chitosan–GO-based thin films were able to detect Co2+ as low as 0.01 ppm for both composite thin films, while the PAR had the higher binding affinity. The interaction of the Co2+ with the thin films was characterized again using XPS to confirm the functional group involved during the reaction. The XPS results proved that primary amino in the PAR–chitosan–GO thin film contributed more important role for the reaction with Co2+, as in agreement with the SPR results.

Concisely modularized assembling of graphene-based thin films with promising electrode performance

2019 ◽  
Vol 3 (7) ◽  
pp. 1462-1470 ◽  
Author(s):  
Weiwei Wei ◽  
Rohit L. Vekariy ◽  
Chuanting You ◽  
Yafei He ◽  
Ping Liu ◽  
...  
Keyword(s):  
Thin Films ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Double Layer ◽  
Van Der Waals ◽  
Cellulose Nanofibers ◽  
Van Der Waals Interactions ◽  
Electrode Performance ◽  
Reduced Graphene

Highly dense thin films assembled from cellulose nanofibers and reduced graphene oxide via van der Waals interactions to realize ultrahigh volumetric double-layer capacitances.

Transparent piezoelectric thin-film devices: Pb(Zr, Ti)O3 thin films on glass substrates

2021 ◽  
Vol 327 ◽  
pp. 112786
Author(s):  
Kazuki Ueda ◽  
Sang-Hyo Kweon ◽  
Hirotaka Hida ◽  
Yoshiharu Mukouyama ◽  
Isaku Kanno
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Glass Substrates ◽  
Piezoelectric Thin Film ◽  
Thin Film Devices

scholarly journals Functionalized Reduced Graphene Oxide Thin Films for Ultrahigh CO2 Gas Sensing Performance at Room Temperature

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 623
Author(s):  
Monika Gupta ◽  
Huzein Fahmi Hawari ◽  
Pradeep Kumar ◽  
Zainal Arif Burhanudin ◽  
Nelson Tansu
Keyword(s):  
Thin Films ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Gas Sensor ◽  
Functional Groups ◽  
Recovery Time ◽  
Room Temperature ◽  
Co2 Gas ◽  
Reduced Graphene ◽  
Response And Recovery

The demand for carbon dioxide (CO2) gas detection is increasing nowadays. However, its fast detection at room temperature (RT) is a major challenge. Graphene is found to be the most promising sensing material for RT detection, owing to its high surface area and electrical conductivity. In this work, we report a highly edge functionalized chemically synthesized reduced graphene oxide (rGO) thin films to achieve fast sensing response for CO2 gas at room temperature. The high amount of edge functional groups is prominent for the sorption of CO2 molecules. Initially, rGO is synthesized by reduction of GO using ascorbic acid (AA) as a reducing agent. Three different concentrations of rGO are prepared using three AA concentrations (25, 50, and 100 mg) to optimize the material properties such as functional groups and conductivity. Thin films of three different AA reduced rGO suspensions (AArGO25, AArGO50, AArGO100) are developed and later analyzed using standard FTIR, XRD, Raman, XPS, TEM, SEM, and four-point probe measurement techniques. We find that the highest edge functionality is achieved by the AArGO25 sample with a conductivity of ~1389 S/cm. The functionalized AArGO25 gas sensor shows recordable high sensing properties (response and recovery time) with good repeatability for CO2 at room temperature at 500 ppm and 50 ppm. Short response and recovery time of ~26 s and ~10 s, respectively, are achieved for 500 ppm CO2 gas with the sensitivity of ~50 Hz/µg. We believe that a highly functionalized AArGO CO2 gas sensor could be applicable for enhanced oil recovery, industrial and domestic safety applications.

Sign in / Sign up

Export Citation Format

Share Document