Characterization of Thin Film CdTe photovoltaic materials deposited by high plasma density magnetron sputtering

2011 ◽  
Vol 1323 ◽  
Author(s):  
A. Abbas ◽  
J.W. Bowers ◽  
B. Maniscalco ◽  
S. Moh ◽  
G.D West ◽  
...  
Keyword(s):  
Magnetron Sputtering ◽  
Plasma Density ◽  
Large Scale ◽  
Scale Up ◽  
High Plasma ◽  
Window Layer ◽  
Closed Field ◽  
Scale Production ◽  
Batch System ◽  
High Plasma Density

ABSTRACTA new magnetron sputtering strategy is introduced that utilizes high plasma density (~5mA.cm-2) to avoid or reduce high temperature processing. The technique uses magnetrons of opposing magnetic polarity to create a “closed field” in which the plasma density is enhanced without the need for high applied Voltages. A batch system has been used which employs a rotating vertical drum as the substrate carrier and a symmetrical array of linear magnetrons. The magnetrons are fitted with target materials for each of the thin films required in the photovoltaic (PV) stack including the CdTe absorber layer, CdS window layer, metal contact using the conventional superstrate configuration. The “closed field” sputtering technology allows scale up not only for larger batch system designs but it is also configurable for “in-line” or “roll to roll” formats for large scale production. The morphology of each of the layers is characterized using a variety of structural and optical techniques including Field Emission Gun SEM and X-ray diffraction (XRD).

Solid Lipid Nanoparticles: A Promising Drug Delivery Technology

2009 ◽  
Vol 2 (2) ◽  
pp. 509-516
Author(s):  
S. Pragati ◽  
S. Kuldeep ◽  
S. Ashok ◽  
M. Satheesh
Keyword(s):  
Drug Delivery ◽  
Solid Lipid Nanoparticles ◽  
Large Scale ◽  
Colloidal Particles ◽  
Scale Up ◽  
Lipid Nanoparticles ◽  
Scale Production ◽  
Research Activity ◽  
New Approach ◽  
Solid Lipid

One of the situations in the treatment of disease is the delivery of efficacious medication of appropriate concentration to the site of action in a controlled and continual manner. Nanoparticle represents an important particulate carrier system, developed accordingly. Nanoparticles are solid colloidal particles ranging in size from 1 to 1000 nm and composed of macromolecular material. Nanoparticles could be polymeric or lipidic (SLNs). Industry estimates suggest that approximately 40% of lipophilic drug candidates fail due to solubility and formulation stability issues, prompting significant research activity in advanced lipophile delivery technologies. Solid lipid nanoparticle technology represents a promising new approach to lipophile drug delivery. Solid lipid nanoparticles (SLNs) are important advancement in this area. The bioacceptable and biodegradable nature of SLNs makes them less toxic as compared to polymeric nanoparticles. Supplemented with small size which prolongs the circulation time in blood, feasible scale up for large scale production and absence of burst effect makes them interesting candidates for study. In this present review this new approach is discussed in terms of their preparation, advantages, characterization and special features.

Recombinant Protein Production in Microalgae: Emerging Trends

2020 ◽  
Vol 27 (2) ◽  
pp. 105-110 ◽  
Author(s):  
Niaz Ahmad ◽  
Muhammad Aamer Mehmood ◽  
Sana Malik
Keyword(s):  
Chloroplast Genome ◽  
Recombinant Proteins ◽  
Large Scale ◽  
Higher Plants ◽  
Scale Up ◽  
Chloroplast Transformation ◽  
Point Of View ◽  
Nuclear Transformation ◽  
Scale Production ◽  
Algal Chloroplast

: In recent years, microalgae have emerged as an alternative platform for large-scale production of recombinant proteins for different commercial applications. As a production platform, it has several advantages, including rapid growth, easily scale up and ability to grow with or without the external carbon source. Genetic transformation of several species has been established. Of these, Chlamydomonas reinhardtii has become significantly attractive for its potential to express foreign proteins inexpensively. All its three genomes – nuclear, mitochondrial and chloroplastic – have been sequenced. As a result, a wealth of information about its genetic machinery, protein expression mechanism (transcription, translation and post-translational modifications) is available. Over the years, various molecular tools have been developed for the manipulation of all these genomes. Various studies show that the transformation of the chloroplast genome has several advantages over nuclear transformation from the biopharming point of view. According to a recent survey, over 100 recombinant proteins have been expressed in algal chloroplasts. However, the expression levels achieved in the algal chloroplast genome are generally lower compared to the chloroplasts of higher plants. Work is therefore needed to make the algal chloroplast transformation commercially competitive. In this review, we discuss some examples from the algal research, which could play their role in making algal chloroplast commercially successful.

Extraction of single-ion beams from helicon ion source in high plasma density operation mode: Experiment and simulation

2006 ◽  
Vol 77 (3) ◽  
pp. 03B901 ◽  
Author(s):  
S. Mordyk ◽  
V. Miroshnichenko ◽  
A. Nahornyy ◽  
D. Nahornyy ◽  
D. Shulha ◽  
...  
Keyword(s):  
Plasma Density ◽  
Operation Mode ◽  
High Plasma ◽  
Ion Beams ◽  
Ion Source ◽  
High Plasma Density ◽  
Experiment And Simulation

Effecting the condition of quasistationary thermonuclear burning in tokamaks with a high plasma density

1987 ◽  
Vol 63 (2) ◽  
pp. 661-664
Author(s):  
N. N. Vasil'ev ◽  
V. �. Lukash ◽  
M. N. Mariinskii ◽  
A. V. Nedospasov
Keyword(s):  
Plasma Density ◽  
High Plasma ◽  
Thermonuclear Burning ◽  
High Plasma Density

Feature Evolution During Sub 100NM Gap-Fill and Etch

2005 ◽  
Author(s):  
Hemant Mungekar ◽  
Young S. Lee ◽  
Shankar Venkataraman
Keyword(s):  
Inductively Coupled Plasma ◽  
Scale Up ◽  
High Plasma ◽  
Inductively Coupled ◽  
Positive Ions ◽  
Aspect Ratios ◽  
High Plasma Density ◽  
Semiconductor Fabrication ◽  
Wafer Size ◽  
Feature Evolution

Inductively coupled plasma (ICP) reactors are being used at low gas pressure (<100mTorr) and high plasma density ([e] > 1013/cm2) processes in semiconductor fabrication. In these reactors plasma is generated by inductively coupled electric field while positive ions are accelerated anisotropically by applying a negative bias RF to the substrate. Semiconductor manufacturers face many challenges as wafer size increases while device geometries decrease. Two key challenges for both process design and electronics processing equipment design are (a) scale up of process from 200mm to 300mm diameter substrate, and (b) deposition and etching features with high aspect ratios. A unified phenomenological model to explain profile evolution trend as a function of aspect ratio for deposition (gap fill) and trench etch using ICP reactors is presented. Trends for feature evolution as a function of pressure for gap fill and trench etch are reviewed and explained. The article emphasizes importance of low pressure for sub-100nm gap-fill and trench-etch applications in ICP processing reactors.

scholarly journals Scale-up of the production of highly reactive biogenic magnetite nanoparticles using Geobacter sulfurreducens

2015 ◽  
Vol 12 (107) ◽  
pp. 20150240 ◽  
Author(s):  
J. M. Byrne ◽  
H. Muhamadali ◽  
V. S. Coker ◽  
J. Cooper ◽  
J. R. Lloyd
Keyword(s):  
Magnetic Properties ◽  
Large Scale ◽  
Scale Up ◽  
Surface Reactivity ◽  
Geobacter Sulfurreducens ◽  
Scale Production ◽  
Buffer Solution ◽  
Pilot Plant Scale ◽  
Functional Biomaterials ◽  
Microbial Systems

Although there are numerous examples of large-scale commercial microbial synthesis routes for organic bioproducts, few studies have addressed the obvious potential for microbial systems to produce inorganic functional biomaterials at scale. Here we address this by focusing on the production of nanoscale biomagnetite particles by the Fe(III)-reducing bacterium Geobacter sulfurreducens , which was scaled up successfully from laboratory- to pilot plant-scale production, while maintaining the surface reactivity and magnetic properties which make this material well suited to commercial exploitation. At the largest scale tested, the bacterium was grown in a 50 l bioreactor, harvested and then inoculated into a buffer solution containing Fe(III)-oxyhydroxide and an electron donor and mediator, which promoted the formation of magnetite in under 24 h. This procedure was capable of producing up to 120 g of biomagnetite. The particle size distribution was maintained between 10 and 15 nm during scale-up of this second step from 10 ml to 10 l, with conserved magnetic properties and surface reactivity; the latter demonstrated by the reduction of Cr(VI). The process presented provides an environmentally benign route to magnetite production and serves as an alternative to harsher synthetic techniques, with the clear potential to be used to produce kilogram to tonne quantities.

Sign in / Sign up

Export Citation Format

Share Document