Design of Optical Isolator with TiO2/(CeY)3Fe5O12 Guiding Layer

2011 ◽  
Vol 1291 ◽  
Author(s):  
Hideki Yokoi ◽  
Shintaro Ikeya ◽  
Tsuyoshi Imada

ABSTRACTAn optical isolator with a TiO2/(CeY)3Fe5O12 guiding layer was studied. A nonreciprocal phase shift was calculated in the magneto-optic waveguide with the TiO2/(CeY)3Fe5O12 guiding layer at a wavelength of 1.55 μm. By employing a multimode interference coupler as coupling devices, the total device length of approximately 600 μm was achieved. An interferometric optical isolator with distinct layer structures, which could be operated in a unidirectional magnetic field, was also designed.

Optik ◽  
2019 ◽  
Vol 179 ◽  
pp. 641-645
Author(s):  
Cui Liang ◽  
Dengwei Zhang ◽  
Xiaowu Shu ◽  
Cheng Liu

2018 ◽  
Vol 777 ◽  
pp. 107-112
Author(s):  
Salinee Choowitsakunlert ◽  
Kenji Takagiwa ◽  
Takuya Kobashigawa ◽  
Nariaki Hosoya ◽  
Rardchawadee Silapunt ◽  
...  

Fabrication processes of a magneto-optic waveguide with a Si guiding layer for an optical isolator employing a nonreciprocal guided-radiation mode conversion are investigated. The optical isolator is constructed on a silicon-on-insulator (SOI) structure. The magneto-optic waveguide is fabricated by bonding the Si guiding layer with a cerium-substituted yttrium iron garnet (Ce:YIG). The relationship of waveguide geometric parameters is determined at a wavelength of 1550 nm. The results show that larger tolerance for isolator operation can be obtained at smaller gaps between Si and Ce:YIG. Bonding processes including photosensitive adhesive bonding and surface activated bonding are then compared. It is found that the surface activated bonding process is easier to control and more promising than the photosensitive adhesive bonding.


2005 ◽  
Vol 10 (2) ◽  
pp. 41-43 ◽  
Author(s):  
J.S. Yang ◽  
J.W. Roh ◽  
W.Y. Lee ◽  
S.H. Ok ◽  
D.H. Woo ◽  
...  

2004 ◽  
Vol 43 (24) ◽  
pp. 4745 ◽  
Author(s):  
Hideki Yokoi ◽  
Yuya Shoji ◽  
Etsu Shin ◽  
Tetsuya Mizumoto

Photonics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 52
Author(s):  
Yue Liu ◽  
Jifang Qiu ◽  
Chang Liu ◽  
Yan He ◽  
Ran Tao ◽  
...  

An optical analog-to-digital converter (OADC) scheme with enhanced bit resolution by using a multimode interference (MMI) coupler as optical quantization is proposed. The mathematical simulation model was established to verify the feasibility and to investigate the robustness of the scheme. Simulation results show that 20 quantization levels (corresponding to 4.32 of effective number of bits (ENOB)) are realized by using only 6 channels, which indicates that the scheme requires much fewer quantization channels or modulators to realize the same amount of ENOB. The scheme is robust and potential for integration.


1977 ◽  
Vol 48 (4) ◽  
pp. 1680-1682 ◽  
Author(s):  
Sadahiko Yamamoto ◽  
Toshio Makimoto

Sign in / Sign up

Export Citation Format

Share Document