Preparation and characterization of a novel solid solution of aluminum in tungsten carbide by mechanically activated high-temperature reaction

2006 ◽  
Vol 21 (7) ◽  
pp. 1700-1703 ◽  
Author(s):  
Junmin Yan ◽  
Xianfeng Ma ◽  
Wei Zhao ◽  
Huaguo Tang ◽  
Changjun Zhu ◽  
...  
Keyword(s):  
Solid Solution ◽  
High Temperature ◽  
Substitutional Solid Solution ◽  
Phase Identification ◽  
Temperature Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
High Temperature Reaction

In this work, a novel substitutional solid solution (W0.8Al0.2)C was synthesized by mechanically activated high-temperature reaction. X-ray diffraction was used for phase identification during the whole reaction process. Environment scanning electronic microscopy–field emission gun and energy dispersive x-ray were used to investigate the microstructure and the quantitative material composition of the specimen. (W0.8Al0.2)C was found to crystallize in the WC-type, and the cell parameters were a = 2.907(1) Å and c = 2.837(1) Å. The hardness of (W0.8Al0.2)C was tested to be 19.3 ± 1 GPa, and the density was 13.19 ± 0.05 g cm−3.

Ni6B22O39·H2O – extending the field of nickel borates

2017 ◽  
Vol 72 (12) ◽  
pp. 967-975 ◽  
Author(s):  
Martin K. Schmitt ◽  
Hubert Huppertz
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
High Temperature ◽  
Temperature Reaction ◽  
Orthorhombic Space Group ◽  
X Ray ◽  
High Temperature Reaction ◽  
High Pressure High Temperature ◽  
Related Phase

AbstractNi6B22O39·H2O was synthesized in a high-pressure/high-temperature reaction at 5 GPa/900°C. It crystallizes in the orthorhombic space group Pmn21 (no. 31) with the lattice parameters a=7.664(2), b=8.121(2) and c=17.402(2) Å. The crystal structure is discussed with regard to the isotypic compounds M6B22O39·H2O (M=Fe, Co) and the structurally related phase Cd6B22O39·H2O. Furthermore, the characterization of Ni6B22O39·H2O via X-ray powder diffraction and vibrational spectroscopy is reported.

scholarly journals Characterization of Radium Sulphate

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Hanna Hedström ◽  
Ingmar Persson ◽  
Gunnar Skarnemark ◽  
Christian Ekberg
Keyword(s):  
Substitutional Solid Solution ◽  
Barium Sulphate ◽  
X Ray Diffraction ◽  
Lead Sulphate ◽  
X Ray ◽  
Cell Parameters ◽  
Barium Strontium ◽  
The Mean ◽  
Sulphate Media

This paper examines the crystal structure of radium sulphate and compares its structure to barium sulphate, strontium sulphate, and lead sulphate. The radium sulphate powder was measured by both powder X-ray diffraction and EXAFS. The unit cell was determined to be orthorhombic, belonging to the Pnma (no. 62) space group with the cell parameters a=9.07 Å, b=5.52 Å, c=7.28 Å, and V=364.48 Å3. These data support the fact that radium sulphate is isostructural with barium, strontium, and lead sulphate. The bond distances were determined using EXAFS. The mean Ra–O and S–O bond distances were found to be 2.96(2) Å and 1.485(8) Å, respectively, and the Ra–O–S bond angle was 127(2)∘. Findings of EXAFS data are quite consistent and support the XRD data. These findings show that it is possible for radium to coprecipitate with barium, strontium, and lead in sulphate media to form a substitutional solid solution.

scholarly journals High-pressure synthesis and characterization of the non-centrosymmetric scandium borate ScB6O9(OH)3

2020 ◽  
Vol 75 (6-7) ◽  
pp. 597-603
Author(s):  
Birgit Fuchs ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure High Temperature ◽  
Structure Solution ◽  
Temperature Experiment ◽  
Pressure Synthesis

AbstractThe non-centrosymmetric scandium borate ScB6O9(OH)3 was obtained through a high-pressure/high-temperature experiment at 6 GPa and 1473 K. Single-crystal X-ray diffraction revealed that the structure is isotypic to InB6O9(OH)3 containing borate triple layers separated by scandium layers. The compound crystallizes in the space group Fdd2 with the lattice parameters a = 38.935(4), b = 4.4136(4), and c = 7.6342(6) Å. Powder X-ray diffraction and vibrational spectroscopy were used to further characterize the compound and verify the proposed structure solution.

Deposition of TRISO Particles With Superhard SiC Coatings and the Characterization of Anisotropy by Raman Spectroscopy

2009 ◽  
Vol 131 (4) ◽  
Author(s):  
E. López-Honorato ◽  
P. J. Meadows ◽  
J. Tan ◽  
Y. Xiang ◽  
P. Xiao
Keyword(s):  
Solid Solution ◽  
Raman Spectroscopy ◽  
Pyrolytic Carbon ◽  
X Ray Diffraction ◽  
X Ray ◽  
Flat Substrate ◽  
High Concentrations ◽  
Triso Particles ◽  
Sic Coatings

In this work we have deposited silicon carbide (SiC) at 1300°C with the addition of small amounts of propylene. The use of propylene and high concentrations of methyltrichlorosilane (9 vol %) allowed the deposition of superhard SiC coatings (42 GPa). The superhard SiC could result from the presence of a SiC–C solid solution, undetectable by X-ray diffraction but visible by Raman spectroscopy. Another sample obtained by the use of 50 vol % Argon, also showed the formation of SiC with good properties. The use of a flat substrate together with the particles showed the importance of carrying out the analysis on actual particles rather than in flat substrates. We show that it is possible to characterize the anisotropy of pyrolytic carbon by Raman spectroscopy.

scholarly journals Crystallization, optimization and preliminary X-ray characterization of a metal-dependent PI-PLC fromStreptomyces antibioticus

2012 ◽  
Vol 68 (11) ◽  
pp. 1378-1386 ◽  
Author(s):  
Michael R. Jackson ◽  
Thomas L. Selby
Keyword(s):  
X Ray Diffraction ◽  
Hanging Drop ◽  
Orthorhombic Space Group ◽  
X Ray ◽  
Streptomyces Antibioticus ◽  
Cell Parameters ◽  
Heavy Atoms ◽  
Hanging Drop Method

A recombinant metal-dependent phosphatidylinositol-specific phospholipase C (PI-PLC) fromStreptomyces antibioticushas been crystallized by the hanging-drop method with and without heavy metals. The native crystals belonged to the orthorhombic space groupP222, with unit-cell parametersa= 41.26,b= 51.86,c = 154.78 Å. The X-ray diffraction results showed significant differences in the crystal quality of samples soaked with heavy atoms. Additionally, drop pinning, which increases the surface area of the drops, was also used to improve crystal growth and quality. The combination of heavy-metal soaks and drop pinning was found to be critical for producing high-quality crystals that diffracted to 1.23 Å resolution.

The solid solution TbNiIn1−x Ga x

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Myroslava Horiacha ◽  
Galyna Nychyporuk ◽  
Rainer Pöttgen ◽  
Vasyl Zaremba
Keyword(s):  
Solid Solution ◽  
Unit Cell ◽  
Type Structure ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Structure Space ◽  
Arc Melting

Abstract Phase formation in the solid solution TbNiIn1−x Ga x at 873 K was investigated in the full concentration range by means of powder X-ray diffraction and EDX analysis. The samples were synthesized by arc-melting of the pure metals with subsequent annealing at 873 K for one month. The influence of the substitution of indium by gallium on the type of structure and solubility was studied. The solubility ranges have been determined and changes of the unit cell parameters were calculated on the basis of powder X-ray diffraction data: TbNiIn1–0.4Ga0–0.6 (ZrNiAl-type structure, space group P 6 ‾ 2 m $P‾{6}2m$ , a = 0.74461(8)–0.72711(17) and c = 0.37976(5)–0.37469(8) nm); TbNiIn0.2–0Ga0.8–1.0 (TiNiSi-type structure, space group Pnma, а = 0.68950(11)–0.68830(12), b = 0.43053(9)–0.42974(6), с = 0.74186(10)–0.73486(13) nm). The crystal structures of TbNiGa (TiNiSi type, Pnma, a = 0.69140(5), b = 0.43047(7), c = 0.73553(8) nm, wR2=0.0414, 525 F 2 values, 21 variables), TbNiIn0.83(1)Ga0.17(1) (ZrNiAl type, P 6 ‾ 2 m $P‾{6}2m$ , a = 0.74043(6), c = 0.37789(3) nm, wR2 = 0.0293, 322 F 2 values, 16 variables) and TbNiIn0.12(2)Ga0.88(2) (TiNiSi type, Pnma, a = 0.69124(6), b = 0.43134(9), c = 0.74232(11) nm, wR2 = 0.0495, 516 F 2 values, 21 variables) have been determined. The characteristics of the solid solutions and the variations of the unit cell parameters are briefly discussed.

scholarly journals Crystal Chemistry and High-Temperature Behaviour of Ammonium Phases NH4MgCl3·6H2O and (NH4)2Fe3+Cl5·H2O from the Burned Dumps of the Chelyabinsk Coal Basin

Minerals ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 486 ◽  
Author(s):  
Andrey A. Zolotarev ◽  
Elena S. Zhitova ◽  
Maria G. Krzhizhanovskaya ◽  
Mikhail A. Rassomakhin ◽  
Vladimir V. Shilovskikh ◽  
...  
Keyword(s):  
Crystal Structure ◽  
High Temperature ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Coal Basin ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Mineral Phases

The technogenic mineral phases NH4MgCl3·6H2O and (NH4)2Fe3+Cl5·H2O from the burned dumps of the Chelyabinsk coal basin have been investigated by single-crystal X-ray diffraction, scanning electron microscopy and high-temperature powder X-ray diffraction. The NH4MgCl3·6H2O phase is monoclinic, space group C2/c, unit cell parameters a = 9.3091(9), b = 9.5353(7), c = 13.2941(12) Å, β = 90.089(8)° and V = 1180.05(18) Å3. The crystal structure of NH4MgCl3·6H2O was refined to R1 = 0.078 (wR2 = 0.185) on the basis of 1678 unique reflections. The (NH4)2Fe3+Cl5·H2O phase is orthorhombic, space group Pnma, unit cell parameters a = 13.725(2), b = 9.9365(16), c = 7.0370(11) Å and V = 959.7(3) Å3. The crystal structure of (NH4)2Fe3+Cl5·H2O was refined to R1 = 0.023 (wR2 = 0.066) on the basis of 2256 unique reflections. NH4MgCl3·6H2O is stable up to 90 °C and then transforms to the less hydrated phase isotypic to β-Rb(MnCl3)(H2O)2 (i.e., NH4MgCl3·2H2O), the latter phase being stable up to 150 °C. (NH4)2Fe3+Cl5·H2O is stable up to 120 °C and then transforms to an X-ray amorphous phase. Hydrogen bonds provide an important linkage between the main structural units and play the key role in determining structural stability and physical properties of the studied phases. The mineral phases NH4MgCl3·6H2O and (NH4)2Fe3+Cl5·H2O are isostructural with natural minerals novograblenovite and kremersite, respectively.

Structural chemistry of NaCoPO4

1996 ◽  
Vol 52 (3) ◽  
pp. 440-449 ◽  
Author(s):  
R. Hammond ◽  
J. Barbier
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Large Family ◽  
X Ray Diffraction ◽  
Tetrahedral Framework ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Tetrahedral Sites ◽  
Bond Valence Analysis

Sodium cobalt phosphate, NaCoPO4, occurs as two different polymorphs which transform reversibly at 998 K. The crystal structures of both polymorphs have been determined by single-crystal X-ray diffraction. The low-temperature form α-NaCoPO4 crystallizes in the space group Pnma with cell parameters: a = 8.871 (3), b = 6.780 (3), c = 5.023 (1) Å, and Z = 4 [wR(F 2) = 0.0653 for all 945 independent reflections]. The α-phase contains octahedrally coordinated Co and Na atoms and tetrahedrally coordinated P atoms, and is isostructural with maracite, NaMnPO4. The structure of high-temperature β-NaCoPO4 is hexagonal with space group P65 and cell parameters: a = 10.166 (1), c = 23.881 (5) Å, and Z = 24 [wR(F 2) = 0.0867 for 4343 unique reflections]. The β-phase belongs to the large family of stuffed tridymites, with the P and Co atoms occupying tetrahedral sites and the Na atoms located in the cavities of the tetrahedral framework. The long c axis corresponds to a 3 × superstructure of the basic tridymite framework (c ≃ 8 Å) and is caused by the displacement of the Na atoms, tetrahedral tilts and strong distortions of the CoO4 tetrahedra. A bond-valence analysis of these phases reveals that the polymorphism in NaCoPO4 is due in part to over-/underbonding of the Na atom in the low-/high-temperature structures, respectively.

A conformational polymorphic transition in the high-temperature ∊-form of chlorpropamide on cooling: a new ∊′-form

2009 ◽  
Vol 65 (6) ◽  
pp. 770-781 ◽  
Author(s):  
Tatiana N. Drebushchak ◽  
Yury A. Chesalov ◽  
Elena V. Boldyreva
Keyword(s):  
Phase Transition ◽  
High Temperature ◽  
Structural Changes ◽  
Molecular Conformation ◽  
Polymorphic Transition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Temperature Range ◽  
Two Phases

Structural changes in the high-temperature ∊-polymorph of chlorpropamide, 4-chloro-N-(propylaminocarbonyl)benzenesulfonamide, C10H13ClN2O3S, on cooling down to 100 K and on reverse heating were followed by single-crystal X-ray diffraction. At temperatures below 200 K the phase transition into a new polymorph (termed the ∊′-form) has been observed for the first time. The polymorphic transition preserves the space group Pna21, is reversible and is accompanied by discontinuous changes in the cell volume and parameters, resulting from changes in molecular conformation. As shown by IR spectroscopy and X-ray powder diffraction, the phase transition in a powder sample is inhomogeneous throughout the bulk, and the two phases co-exist in a wide temperature range. The cell parameters and the molecular conformation in the new polymorph are close to those in the previously known α-polymorph, but the packing of the z-shaped molecular ribbons linked by hydrogen bonds inherits that of the ∊-form and is different from the packing in the α-polymorph. A structural study of the α-polymorph in the same temperature range has revealed no phase transitions.

scholarly journals Growth and Characterization of Pure and Doped L-Alanine Tartrate Single Crystals

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
K. Rajesh ◽  
B. Milton Boaz ◽  
P. Praveen Kumar
Keyword(s):  
Single Crystals ◽  
Vickers Microhardness ◽  
Diffraction Method ◽  
Dielectric Studies ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Single crystals of pure and Lanthanum doped L-Alanine Tartrate were grown by slow evaporation method. The cell parameters were determined using single crystal X-ray diffraction method. To improve the physical properties of the LAT crystal, Lanthanum dopant was added by 2 mol%. ICP studies confirm the presence of Lanthanum in the grown LAT crystal. Transparency range of the crystal was determined using UV-VIS-NIR spectrophotometer. The functional groups of pure and doped LAT crystals were analyzed by FT-IR spectroscopy. Using Vickers microhardness tester, mechanical strength of the material was found. Dielectric studies of pure and doped LAT single crystals were carried out. The doped LAT crystal is found to have efficiency higher than that of pure LAT crystal.

Sign in / Sign up

Export Citation Format

Share Document