Side-chain effect on the photovoltaic performance of conjugated polymers based on benzodifuran and benzodithiophene-4,8-dione

MRS Advances ◽  
2019 ◽  
Vol 4 (36) ◽  
pp. 2001-2007
Author(s):  
Enfang He ◽  
Hong Zhang ◽  
Yueyue Gao ◽  
Fengyun Guo ◽  
Shiyong Gao ◽  
...  
Keyword(s):  
Fill Factor ◽  
Open Circuit Voltage ◽  
Polymer Solar Cells ◽  
Photovoltaic Performance ◽  
Open Circuit ◽  
Side Chain ◽  
Large Area ◽  
Device Structure ◽  
Roll To Roll ◽  
Solvent Additive

ABSTRACT:Two benzodifuran (BDF) polymers, PBDF-C and PBDF-S, with alkyl and alkylthio substituted thiophene side-chains and benzodithiophene-4,8-dione (BDD) as the acceptor were designed and synthesized. Their optical, electrochemical properties and photovoltaic performances were systematically investigated. The polymer solar cells (PSCs) with a device structure of ITO/PEDOT:PSS/polymer:PC71BM/Ca/Al were fabricated. The PBDF-C based device showed a power conversion efficiency (PCE) of 3.01% after adding 1 vol% 1,8-diodooctane (DIO) as the solvent additive, and PBDF-S gave an enhanced PCE of 3.48% without any post-treatments. The enhancements were from the higher open-circuit voltage (Voc) and fill factor (FF). The thermal- and solvent-treatment-free processing is more favourable for the large area roll-to-roll manufacturing or printing technology for PSCs.

scholarly journals Ultra-low p-doping of poly(3-hexylthiophene) and its impact on polymer aggregation and photovoltaic performance

2016 ◽  
Vol 4 (1) ◽  
Author(s):  
Marcel M. Said ◽  
Yadong Zhang ◽  
Raghunath R. Dasari ◽  
Dalaver H. Anjum ◽  
Rahim Munir ◽  
...  
Keyword(s):  
Solar Cells ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Photovoltaic Performance ◽  
Photovoltaic Cells ◽  
Open Circuit ◽  
Device Performance ◽  
Long Range Order ◽  
P3ht Film ◽  
Low Levels

AbstractPoly(3-hexylthiophene) (P3HT) films and P3HT / fullerene photovoltaic cells have been p-doped with very low levels (< 1 wt. %) of molybdenum tris[1-(trifluoromethylcarbonyl)- 2-(trifluoromethyl)-ethane-1,2-dithiolene]. The dopants are inhomogenously distributed within doped P3HT films, both laterally and as a function of depth, and appear to aggregate in some instances. Doping also results in subtle changes in the local and long range order of the P3HT film. These effects likely contribute to the complexity of the observed evolutions in conductivity, mobility and work function with doping levels. They also negatively affect the open-circuit voltage and fill factor of solar cells in unexpected ways, indicating that dopant aggregation and non-uniform distribution can harm device performance.

scholarly journals Steady Enhancement in Photovoltaic Properties of Fluorine Functionalized Quinoxaline-Based Narrow Bandgap Polymer

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 54 ◽  
Author(s):  
Zhonglian Wu ◽  
Huanxiang Jiang ◽  
Xingzhu Wang ◽  
Lei Yan ◽  
Wei Zeng ◽  
...  
Keyword(s):  
Fill Factor ◽  
Polymer Solar Cells ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Hole Mobility ◽  
Short Circuit Current ◽  
Open Circuit ◽  
Promising Candidate ◽  
Photovoltaic Properties ◽  
Narrow Bandgap

To investigate the influence of fluoride phenyl side-chains onto a quinoxaline (Qx) unit on the photovoltaic performance of the narrow bandgap (NBG) photovoltaic polymers, herein, two novel NBG copolymers, PBDTT-DTQx and PBDTT-DTmFQx, were synthesized and characterized. 2-ethylhexylthiothiophene-substituted benzodithiophene (BDTT), 2,3-diphenylquinoxaline (DQx) [or 2,3-bis(3-fluorophenyl)quinoxaline (DmFQx)] and 2-ethylhexylthiophene (T) were used as the electron donor (D) unit, electron-withdrawing acceptor (A) unit and π-bridge, respectively. Compared to non-fluorine substituted PBDTT-DTQx, fluoride PBDTT-DTmFQx exhibited a wide UV-Vis absorption spectrum and high hole mobility. An enhanced short-circuit current (Jsc) and fill factor (FF) simultaneously gave rise to favorable efficiencies in the polymer/PC71BM-based polymer solar cells (PSCs). Under the illumination of AM 1.5G (100 mW cm−2), a maximum power conversion efficiency (PCE) of 6.40% was achieved with an open-circuit voltage (Voc) of 0.87 V, a Jsc of 12.0 mA cm−2 and a FF of 61.45% in PBDTT-DTmFQx/PC71BM-based PSCs, while PBDTT-DTQx-based devices also exhibited a PCE of 5.43%. The excellent results obtained demonstrate that PBDTT-DTmFQx by fluorine atom engineering could be a promising candidate for organic photovoltaics.

scholarly journals Synthesis of Bithiophene-Based D-A1-D-A2 Terpolymers with Different A2 Moieties for Polymer Solar Cells via Direct Arylation

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 55 ◽  
Author(s):  
Jinfeng Huang ◽  
Zhenkun Lin ◽  
Wenhuai Feng ◽  
Wen Wang
Keyword(s):  
Open Circuit Voltage ◽  
Polymer Solar Cells ◽  
Energy Levels ◽  
Open Circuit ◽  
Side Chain ◽  
Film Morphology ◽  
Photovoltaic Properties ◽  
Direct Arylation ◽  
Blend Film ◽  
Highest Occupied Molecular Orbital

A series of bithiophene (2T)-based D-A1-D-A2 terpolymers with different A2 moieties were prepared via direct arylation reaction. In these terpolymers, pyrrolo[3,4-c]pyrrole-1,4-dione (DPP) was selected as the first electron-accepting (A1) moiety, 2,1,3-benzothiadiazole (BT) or fluorinated benzothiadiazole (FBT) or octyl-thieno[3,4-c]pyrrole-4,6-dione (TPD) or 2,1,3-benzoselendiazole (SeT) was selected as the second electron-accepting (A2) moiety, while bithiophene with hexyl side chain was used as the electron-donating moiety. The UV-vis absorption, electrochemical properties, blend film morphology, and photovoltaic properties were studied to explore the effects of the A2 moiety. It is shown that these terpolymer films exhibit broad absorption (350–1000 nm), full width at half-maximum of more than 265 nm and ordered molecular packing. Varying the A2 moiety could affect the energy levels and blend film morphology leading to different polymer solar cell (PSC) performances of these (2T)-based D-A1-D-A2 terpolymers. As a result, the highest Jsc of 10.70 mA/cm2 is achieved for Polymer 1 (P1) with BT as A2 moiety, while the higher highest occupied molecular orbital (HOMO) level limits the open circuit voltage (Voc) and leads to a power conversion efficiency (PCE) of 3.46%.

Simultaneous Enhancement of Open-Circuit Voltage, Short-Circuit Current Density, and Fill Factor in Polymer Solar Cells

2011 ◽  
Vol 23 (40) ◽  
pp. 4636-4643 ◽  
Author(s):  
Zhicai He ◽  
Chengmei Zhong ◽  
Xun Huang ◽  
Wai-Yeung Wong ◽  
Hongbin Wu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Current Density ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Polymer Solar Cells ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit

scholarly journals Effects of Hole-Collecting Buffer Layers and Electrodes on the Performance of Flexible Plastic Organic Photovoltaics

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Sungho Woo ◽  
Hong-Kun Lyu ◽  
Yoon Soo Han ◽  
Youngkyoo Kim
Keyword(s):  
Indium Tin Oxide ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Series Resistance ◽  
Short Circuit ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Buffer Layers ◽  
Large Area

Here we report the influences of the sheet resistance (Rsheet) of a hole-collecting electrode (indium tin oxide, ITO) and the conductivity of a hole-collecting buffer layer (poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), PEDOT:PSS) on the device performance of flexible plastic organic photovoltaic (OPV) devices. The series resistance (RS) of OPV devices steeply increases with increasingRsheetof the ITO electrode, which leads to a significant decrease of short-circuit current density (JSC) and fill factor (FF) and power conversion efficiency, while the open-circuit voltage (VOC) was almost constant. By applying high-conductivity PEDOT:PSS, the efficiency of OPV devices with highRsheetvalues of 160 Ω/□ and 510 Ω/□ is greatly improved, by a factor of 3.5 and 6.5, respectively. These results indicate that the conductivities of ITO and PEDOT:PSS will become more important to consider for manufacturing large-area flexible plastic OPV modules.

Fabrication of TiO2 Nanotubes Array by Anodization for DSSC

2013 ◽  
Vol 743-744 ◽  
pp. 920-925
Author(s):  
Hong Zhou Yan ◽  
Jun You Yang ◽  
Shuang Long Feng ◽  
Ming Liu ◽  
Jiang Ying Peng ◽  
...  
Keyword(s):  
Fill Factor ◽  
Open Circuit Voltage ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
Tetrabutyl Titanate ◽  
X Ray Diffraction ◽  
X Ray

TiO2 nanotubes array was fabricated by anodization. Effect of reaction duration on the morphology of TiO2 nanotube arrays was studied detailedly. The structure and morphology of the prepared nanotubes array was characterized by X-ray diffraction and scanning electron microscopy, respectively. The fabricated TiO2 arrays were peeled off and adhered to FTO glass with adhesive (mixture of tetrabutyl titanate and polyethylene glycol), then they were sintered at 450 for photoanode of DSSC. The photovoltaic performance of the prepared sample as the DSSC anode was investigated. An open circuit voltage of 0.69V and a short circuit current density of 7.78mA/cm2 were obtained, and the fill factor and the convert efficiency were 0.517 and 2.78%, respectively.

scholarly journals Dependence of material properties and photovoltaic performance of triple cation tin perovskites on the iodide to bromide ratio

2019 ◽  
Vol 150 (11) ◽  
pp. 1921-1927 ◽  
Author(s):  
Stefan Weber ◽  
Thomas Rath ◽  
Birgit Kunert ◽  
Roland Resel ◽  
Theodoros Dimopoulos ◽  
...  
Keyword(s):  
Material Properties ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Short Circuit Current ◽  
Short Circuit Current Density ◽  
Open Circuit ◽  
X Ray Diffraction ◽  
X Ray

Abstract In this work, the influence of a partial introduction of bromide (x = 0–0.33) into MA0.75FA0.15PEA0.1Sn(BrxI1−x)3 (MA: methylammonium, FA: formamidinium, PEA: phenylethylammonium) triple cation tin perovskite on the material properties and photovoltaic performance is investigated and characterized. The introduction of bromide shifts the optical band gap of the perovskite films from 1.29 eV for the iodide-based perovskite to 1.50 eV for the perovskite with a bromide content of x = 0.33. X-ray diffraction measurements reveal that the size of the unit cell is also gradually reduced based on the incorporation of bromide. Regarding the photovoltaic performance of the perovskite films, it is shown that already small amounts of bromide (x = 0.08) in the perovskite system increase the open circuit voltage, short circuit current density and fill factor. The maximum power conversion efficiency of 4.63% was obtained with a bromide content of x = 0.25, which can be ascribed to the formation of homogeneous thin films in combination with higher values of the open circuit voltage. Upon introduction of a higher amount of bromide (x = 0.33), the perovskite absorber layers form pinholes, thus reducing the overall device performance. Graphic abstract

Simultaneous improvement of three parameters using a binary processing solvent system approach in as-cast non-fullerene solar cells

2019 ◽  
Vol 7 (45) ◽  
pp. 25978-25984 ◽  
Author(s):  
Guoming Qin ◽  
Lianjie Zhang ◽  
Dong Yuan ◽  
Haiying Jiang ◽  
Wei Tang ◽  
...  
Keyword(s):  
Solar Cells ◽  
System Approach ◽  
Fill Factor ◽  
Open Circuit Voltage ◽  
Short Circuit ◽  
Photovoltaic Performance ◽  
Short Circuit Current ◽  
Solvent System ◽  
Open Circuit ◽  
Binary Solvent

A binary solvent approach simultaneously improves the open-circuit voltage, short-circuit current, and fill factor, and finally elevates the as-cast photovoltaic performance.

Sign in / Sign up

Export Citation Format

Share Document