Synthesis, microstructure, and mechanical properties of polycrystalline Cu nano-foam

MRS Advances ◽  
2018 ◽  
Vol 3 (8-9) ◽  
pp. 469-475 ◽  
Author(s):  
Chang-Eun Kim ◽  
Raheleh M. Rahimi ◽  
Nia Hightower ◽  
Ioannis Mastorakos ◽  
David F. Bahr
Keyword(s):  
Mechanical Properties ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Copper Acetate ◽  
Precursor Solution ◽  
Woven Fabric ◽  
Structure Property ◽  
Property Relations ◽  
Multi Scale ◽  
Cu Foam

AbstractA polycrystalline Cu foam with sub-micron ligament sizes was formed by creating a non-woven fabric via electrospinning with a homogeneous mixture of polyvinyl alcohol(PVA)-and copper acetate(Cu(Ac)2). Thermogravimetric measurement of the electrospun fabric of the precursor solution is reported. Oxidizing the precursor fabric at 773K formed an oxide nano-foam; subsequent heating at 573K with a reducing gas transformed the CuO nano-foam to Cu with a similar ligament and meso-scale pore size morphology. A cross-section prepared by focused ion beam lift-out shows the polycrystalline structure with multi-scale porosity. The mechanical property of the Cu nano-foam is measured by nano-indentation. The load-depth curves and deduced mechanical properties suggest that additional intra-ligament pores lead to unique structure-property relations in this non-conventional form of metal.

scholarly journals Multi-Scale Structure–Mechanical Property Relations of Graphene-Based Layer Materials

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4757
Author(s):  
Jingran Liu ◽  
Huasong Qin ◽  
Yilun Liu
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Functional Materials ◽  
Scale Structure ◽  
Monolayer Graphene ◽  
Pristine Graphene ◽  
Multilayer Graphene ◽  
Structure Property ◽  
Property Relations ◽  
Multi Scale

Pristine graphene is one of the strongest materials known in the world, and may play important roles in structural and functional materials. In order to utilize the extraordinary mechanical properties in practical engineering structures, graphene should be assembled into macroscopic structures such as graphene-based papers, fibers, foams, etc. However, the mechanical properties of graphene-based materials such as Young’s modulus and strength are 1–2 orders lower than those of pristine monolayer graphene. Many efforts have been made to unveil the multi-scale structure–property relations of graphene-based materials with hierarchical structures spanning the nanoscale to macroscale, and significant achievements have been obtained to improve the mechanical performance of graphene-based materials through composition and structure optimization across multi-scale. This review aims at summarizing the currently theoretical, simulation, and experimental efforts devoted to the multi-scale structure–property relation of graphene-based layer materials including defective monolayer graphene, nacre-like and laminar nanostructures of multilayer graphene, graphene-based papers, fibers, aerogels, and graphene/polymer composites. The mechanisms of mechanical property degradation across the multi-scale are discussed, based on which some multi-scale optimization strategies are presented to further improve the mechanical properties of graphene-based layer materials. We expect that this review can provide useful insights into the continuous improvement of mechanical properties of graphene-based layer materials.

Metallic Nanoneedles Arrays for TEM Sample Preparation “Lift-Out”

2012 ◽  
Author(s):  
Romaneh Jalilian ◽  
David Mudd ◽  
Neil Torrez ◽  
Jose Rivera ◽  
Mehdi M. Yazdanpanah ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electron Microscope ◽  
Sample Preparation ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Beam System ◽  
Transmission Electron ◽  
Nanoneedle Array ◽  
Superior Mechanical Properties ◽  
And Performance

Abstract The sample preparation for transmission electron microscope can be done using a method known as "lift-out". This paper demonstrates a method of using a silver-gallium nanoneedle array for a quicker sharpening process of tungsten probes with better sample viewing, covering the fabrication steps and performance of needle-tipped probes for lift-out process. First, an array of high aspect ratio silver-gallium nanoneedles was fabricated and coated to improve their conductivity and strength. Then, the nanoneedles were welded to a regular tungsten probe in the focused ion beam system at the desired angle, and used as a sharp probe for lift-out. The paper demonstrates the superior mechanical properties of crystalline silver-gallium metallic nanoneedles. Finally, a weldless lift-out process is described whereby a nano-fork gripper was fabricated by attaching two nanoneedles to a tungsten probe.

scholarly journals Artificial generation of representative single Li-ion electrode particle architectures from microscopy data

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Orkun Furat ◽  
Lukas Petrich ◽  
Donal P. Finegan ◽  
David Diercks ◽  
Francois Usseglio-Viretta ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Electron Backscatter Diffraction ◽  
Ion Beam ◽  
Lithium Ion ◽  
Scale Model ◽  
Multi Scale ◽  
Physics Modeling ◽  
Microscopy Data ◽  
Microscopy Techniques ◽  
Backscatter Diffraction

AbstractAccurately capturing the architecture of single lithium-ion electrode particles is necessary for understanding their performance limitations and degradation mechanisms through multi-physics modeling. Information is drawn from multimodal microscopy techniques to artificially generate LiNi0.5Mn0.3Co0.2O2 particles with full sub-particle grain detail. Statistical representations of particle architectures are derived from X-ray nano-computed tomography data supporting an ‘outer shell’ model, and sub-particle grain representations are derived from focused-ion beam electron backscatter diffraction data supporting a ‘grain’ model. A random field model used to characterize and generate the outer shells, and a random tessellation model used to characterize and generate grain architectures, are combined to form a multi-scale model for the generation of virtual electrode particles with full-grain detail. This work demonstrates the possibility of generating representative single electrode particle architectures for modeling and characterization that can guide synthesis approaches of particle architectures with enhanced performance.

scholarly journals Effect of Ion Irradiation on Nanoindentation Fracture and Deformation in Silicon Carbide

JOM ◽  
2021 ◽  
Author(s):  
Alexander J. Leide ◽  
Richard I. Todd ◽  
David E. J. Armstrong
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Residual Stresses ◽  
Focused Ion Beam ◽  
Electron Backscatter Diffraction ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Resolution Electron ◽  
Radiation Induced ◽  
Compressive Residual Stresses

AbstractSilicon carbide is desirable for many nuclear applications, making it necessary to understand how it deforms after irradiation. Ion implantation combined with nanoindentation is commonly used to measure radiation-induced changes to mechanical properties; hardness and modulus can be calculated from load–displacement curves, and fracture toughness can be estimated from surface crack lengths. Further insight into indentation deformation and fracture is required to understand the observed changes to mechanical properties caused by irradiation. This paper investigates indentation deformation using high-resolution electron backscatter diffraction (HR-EBSD) and Raman spectroscopy. Significant differences exist after irradiation: fracture is suppressed by swelling-induced compressive residual stresses, and the plastically deformed region extends further from the indentation. During focused ion beam cross-sectioning, indentation cracks grow, and residual stresses are modified. The results clarify the mechanisms responsible for the modification of apparent hardness and apparent indentation toughness values caused by the compressive residual stresses in ion-implanted specimens.

The Effect of the Compounding Procedure on the Morphology and Mechanical Properties of PLA/PBAT-Based Nanocomposites

2021 ◽  
Vol 36 (2) ◽  
pp. 219-227
Author(s):  
P. Saiprasit ◽  
A. K. Schlarb
Keyword(s):  
Mechanical Properties ◽  
Residence Time ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Silicon Dioxide Nanoparticles ◽  
Twin Screw ◽  
One Step ◽  
Thermodynamic Driving Force

Abstract Poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT)-based nanocomposites filled with 1 vol.% silicon dioxide nanoparticles (nano-SiO2) were prepared using a co-rotating twin-screw extruder and injection molding. The nanocomposites with various blending sequences were investigated using PLA-based and PBAT-based nanocomposite masterbatches. Morphology of the PLA/PBAT/SiO2 nanocomposites was examined using a scanning electron microscope (SEM) and a focused ion beam (FIB) SEM. It is found that the nano-SiO2 locates in the original polymer phase, in which it is firstly incorporated in the masterbatch process, as well as at the interface between the two polymers. However, as the residence time in the extrusion process increases, the nanoparticles migrate from the original phase to the interface, governed by the thermodynamic driving force. The best optimization of mechanical properties is achieved by using the PBAT-based masterbatches with a one-step process or short residence time. The processing history, therefore, has a tremendous impact on the final properties of the resulting materials.

Mechanical Properties of Electroplated Copper Thin Films

1999 ◽  
Vol 594 ◽  
Author(s):  
R. Spolenak ◽  
C. A. Volkert ◽  
K. Takahashi ◽  
S. Fiorillo ◽  
J. Miner ◽  
...  
Keyword(s):  
Thin Films ◽  
Mechanical Properties ◽  
Grain Size ◽  
Film Thickness ◽  
Yield Stress ◽  
Laser Scanning ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Cu Films ◽  
Electroplated Copper

AbstractIt is well known that the mechanical properties of thin films depend critically on film thickness However, the contributions from film thickness and grain size are difficult to separate, because they typically scale with each other. In one study by Venkatraman and Bravman, Al films, which were thinned using anodic oxidation to reduce film thickness without changing grain size, showed a clear increase in yield stress with decreasing film thickness.We have performed a similar study on both electroplated and sputtered Cu films by using chemical-mechanical polishing (CMP) to reduce the film thickness without changing the grain size. Stress-temperature curves were measured for both the electroplated and sputtered Cu films with thicknesses between 0.1 and 1.8 microns using a laser scanning wafer curvature technique. The yield stress at room temperature was found to increase with decreasing film thickness for both sets of samples. The sputtered films, however, showed higher yield stresses in comparison to the electroplated films. Most of these differences can be attributed to the different microstructures of the films, which were determined by focused ion beam (FIB) microscopy and x-ray diffraction.

Characterization of the mechanical behavior of wear surfaces on single crystal nickel by nanomechanical techniques

2009 ◽  
Vol 24 (3) ◽  
pp. 844-852 ◽  
Author(s):  
M.J. Cordill ◽  
N.R. Moody ◽  
S.V. Prasad ◽  
J.R. Michael ◽  
W.W. Gerberich
Keyword(s):  
Mechanical Properties ◽  
Single Crystal ◽  
Mechanical Behavior ◽  
Cross Sections ◽  
Focused Ion Beam ◽  
Surface Deformation ◽  
Ion Beam ◽  
Test Methods ◽  
Strong Increase ◽  
Number Of Cycles

In ductile metals, sliding contact induces plastic deformation resulting in subsurfaces, the mechanical properties of which are different from those of the bulk. This article describes a novel combination of nanomechanical test methods and analysis techniques to evaluate the mechanical behavior of the subsurfaces generated underneath a wear surface. In this methodology, nanoscratch techniques were first used to generate wear patterns as a function of load and number of cycles using a Hysitron TriboIndenter. Measurements were made on a (001) single crystal plane along two crystallographic directions, <001> and <011>. Nanoindentation was then used to measure mechanical properties in each wear pattern. The results on the (001) single crystal nickel plane showed that there was a strong increase in hardness with increasing applied load that was accompanied by a change in surface deformation. The amount of deformation underneath the wear patterns was examined from focused ion beam cross-sections of the wear patterns.

Sign in / Sign up

Export Citation Format

Share Document