Reliability of Metal Gate / High-k devices and its impact on CMOS technology scaling

MRS Advances ◽  
2017 ◽  
Vol 2 (52) ◽  
pp. 2973-2982 ◽  
Author(s):  
Andreas Kerber
Keyword(s):  
Dielectric Breakdown ◽  
Cmos Technology ◽  
Gate Stack ◽  
Leakage Currents ◽  
Technology Scaling ◽  
Device Scaling ◽  
Novel Device ◽  
Time Dependent Dielectric Breakdown ◽  
Bias Temperature Instability ◽  
High K

ABSTRACTMG/HK was introduced into CMOS technology and enabled scaling beyond the 45/32nm technology node. The change in gate stack from poly-Si/SiON to MG/HK introduced new reliability challenges like the positive bias temperature instability (PBTI) and stress induced leakage currents (SILC) in nFET devices which prompted thorough investigation to provide fundamental understanding of these degradation mechanisms and are nowadays well understood. The shift to a dual-layer gate stack also had a profound impact on the time dependent dielectric breakdown (TDDB) introducing a strong polarity dependence in the model parameter. As device scaling continues, stochastic modeling of variability, both at time zero and post stress due to BTI, becomes critical especially for SRAM circuit aging. As we migrate towards novel device architectures like bulk FinFET, SOI FinFETs, FDSOI and gate-all-around devices, impact of self-heating needs to be accounted for in reliability testing.In this paper we summarize the fundamentals of MG/HK reliability and discuss the reliability and characterization challenges related to the scaling of future CMOS technologies.

Reliability Investigations up to 350°C of Gate Oxide Capacitors Realized in a Silicon-on-Insulator CMOS Technology

2013 ◽  
Vol 10 (4) ◽  
pp. 150-154 ◽  
Author(s):  
K. Grella ◽  
S. Dreiner ◽  
H. Vogt ◽  
U. Paschen
Keyword(s):  
Dielectric Breakdown ◽  
Gate Oxide ◽  
Oxide Thickness ◽  
Cmos Technology ◽  
Silicon On Insulator ◽  
Cmos Process ◽  
Leakage Currents ◽  
Oxide Breakdown ◽  
Time Dependent Dielectric Breakdown ◽  
Operation Temperature

It is difficult to use standard bulk-CMOS-technology at temperatures higher than 175°C due to high pn-leakage currents. Silicon-on-insulator-technologies (SOI), on the other hand, are usable up to 250°C and even higher, because leakage currents can be reduced by two to three orders of magnitude. Nevertheless, performance and reliability of SOI devices are strongly affected at these high temperatures. One of the main critical factors is the gate oxide quality and its reliability. In this paper, we present a study of gate oxide capacitor time-dependent dielectric breakdown (TDDB) measurements at temperatures up to 350°C. The experiments were carried out on gate oxide capacitor structures realized in the Fraunhofer 1.0 μm SOI-CMOS process. The gate oxide thickness is 40 nm. Using the data of the TDDB measurements, the behavior of field and temperature acceleration parameters at temperatures up to 350°C was evaluated. For a more detailed investigation, the evolution of the current in time was also studied. An analysis of the oxide breakdown conditions, in particular the field and temperature dependence of the charge to breakdown and the current just before breakdown, completes the study. The presented data provide important information about accelerated oxide reliability testing beyond 250°C, and make it possible to quickly evaluate the reliability of high temperature CMOS technologies at operation temperature.

scholarly journals Peculiarities of time-dependent-dielectric breakdown characteristics of pure and doped Ta2O5 stacks

2013 ◽  
Vol 26 (3) ◽  
pp. 281-296
Author(s):  
E. Atanassova ◽  
A. Paskaleva
Keyword(s):  
Dielectric Breakdown ◽  
Interface Layer ◽  
Time Dependent ◽  
Relative Impact ◽  
Time Dependent Dielectric Breakdown ◽  
Breakdown Mechanism ◽  
Number Of Factors ◽  
High K ◽  
Induced Defects

The effect of both the process-induced defects and the dopant on the time-dependent-dielectric breakdown in Ta2O5 stacks is discussed. The breakdown degradation is analyzed in terms of specific properties of high-k stacks which make their dielectric breakdown mechanism completely different from that of classical SiO2. The relative impact of a number of factors constituting the reliability issues in Ta2O5-based capacitors (trapping in pre-existing traps, stress-induced new traps generation, the presence of interface layer at Si and the role of the dopant) is clarified.

High Temperature Reliability Investigations up to 350 °C of Gate Oxide Capacitors realized in a Silicon-on-Insulator CMOS-Technology

2013 ◽  
Vol 2013 (HITEN) ◽  
pp. 000116-000121
Author(s):  
K. Grella ◽  
S. Dreiner ◽  
H. Vogt ◽  
U. Paschen
Keyword(s):  
High Temperature ◽  
Dielectric Breakdown ◽  
Gate Oxide ◽  
Oxide Thickness ◽  
Cmos Technology ◽  
Silicon On Insulator ◽  
Cmos Process ◽  
Oxide Breakdown ◽  
Time Dependent Dielectric Breakdown ◽  
Single Poly Eeprom

Standard Bulk-CMOS-technology targets use-temperatures of not more than 175 °C. With Silicon-on-Insulator-technologies (SOI), digital and analog circuitry is possible up to 250 °C and even more, but performance and reliability are strongly affected at these high temperatures. One of the main critical factors is the gate oxide quality and its reliability. In this paper, we present a study of gate oxide capacitor time-dependent dielectric breakdown (TDDB) measurements at temperatures up to 350 °C. The experiments were carried out on gate oxide capacitor structures which were realized in the Fraunhofer 1.0 μm SOI-CMOS process. This technology is based on 200 mm wafers and features, among others, three layers of tungsten metallization with excellent reliability concerning electromigration, voltage independent capacitors, high resistance resistors, and single-poly-EEPROM cells. The gate oxide thickness is 40 nm. Using the data of the TDDB-measurements, the behavior of field and temperature acceleration parameters at temperatures up to 350 °C was evaluated. For a more detailed investigation, the current evolution in time was also studied. An analysis of the oxide breakdown conditions, in particular the field and temperature dependence of the charge to breakdown and the current just before breakdown, completes the study. The presented data provide important information about accelerated oxide reliability testing beyond 250 °C, and make it possible to quickly evaluate the reliability of high temperature CMOS-technologies at use-temperature.

RF CMOS technology scaling in High-k/metal gate era for RF SoC (system-on-chip) applications

2010 ◽  
Author(s):  
C.-H. Jan ◽  
M. Agostinelli ◽  
H. Deshpande ◽  
M. A. El-Tanani ◽  
W. Hafez ◽  
...  
Keyword(s):  
Cmos Technology ◽  
System On Chip ◽  
Rf Cmos ◽  
Metal Gate ◽  
Technology Scaling ◽  
High K ◽  
On Chip

Reliability Perspective of High-k Gate Stack Assessed by Temperature Dependence of Dielectric Breakdown

2007 ◽  
Author(s):  
Kenji Okada ◽  
Tsuyoshi Horikawa ◽  
Hideki Satake ◽  
Seiji Inumiya ◽  
Yasushi Akasaka ◽  
...  
Keyword(s):  
Temperature Dependence ◽  
Dielectric Breakdown ◽  
Gate Stack ◽  
High K
Sign in / Sign up

Export Citation Format

Share Document