scholarly journals DETERMINATION OF THE COEFFICIENT OF THE TRANSFORMATION OF A CURRENT PARAMETER BRIDGE OF A SINGLE-PHASE RECTIFIER WITH PARALLEL ACTIVE-CAPACITIVE LOAD

2019 ◽  
Vol 2019 (5) ◽  
pp. 43-48 ◽  
Author(s):  
V.M. Spirin ◽  
◽  
V.M. Hubarevich ◽  
Yu.V. Marunya ◽  
S.V. Salko ◽  
...  
Keyword(s):  
Single Phase ◽  
Capacitive Load ◽  
Current Parameter ◽  
A Current ◽  
Single Phase Rectifier

A Current Decomposition-Based Method for Computationally Efficient Implementation of Power Resolution Meters in Non- Sinusoidal Single-Phase Systems

2013 ◽  
Vol 20 (2) ◽  
pp. 263-274
Author(s):  
Murat Erhan Balci ◽  
Mehmet Hakan Hocaoglu
Keyword(s):  
Measurement Method ◽  
Single Phase ◽  
Accurate Determination ◽  
Efficient Implementation ◽  
Computationally Efficient ◽  
Power Meter ◽  
Phase Systems ◽  
Maximum Power Factor ◽  
A Current

Abstract For non-sinusoidal single-phase systems, the classical apparent power has been divided into various components using different techniques. These power resolutions generally aim at to provide a tool for the accurate determination of the maximum power factor achievable with a passive compensator and to measure the load.s nonlinearity degree. This paper presents a current decomposition-based methodology that can be employed for computationally efficient implementation of the widely recognized non-sinusoidal power resolutions. The proposed measurement method and the original expressions of the power resolutions are comparatively evaluated by considering their computational complexity. The results show that the proposed method has a significant advantage in terms of computational efficiency for the simultaneous measurements of the powers when compared with the original expressions. Finally, in this paper, a PC-based power meter is developed using the proposed measurement method via the LabVIEW programme.

scholarly journals Modelling, Design and Control of Cascaded H-Bridge Single Phase Rectifier

2019 ◽  
Author(s):  
Nasiru B. Kadandani ◽  
Salaheddine Ethni ◽  
Mohamed Dahidah ◽  
Hamza Khalfalla
Keyword(s):  
Single Phase ◽  
And Control ◽  
Single Phase Rectifier

scholarly journals Single-phase determination of calcium and magnesium in biodiesel using smartphone-based digital images

Fuel ◽  
2022 ◽  
Vol 307 ◽  
pp. 121837
Author(s):  
Samara Soares ◽  
Gabriel M. Fernandes ◽  
Liz M.B. Moraes ◽  
Alex D. Batista ◽  
Fábio R.P. Rocha
Keyword(s):  
Single Phase ◽  
Digital Images ◽  
Phase Determination ◽  
Calcium And Magnesium

scholarly journals III. On the atomic weight of manganese

1883 ◽  
Vol 35 (224-226) ◽  
pp. 44-48
Keyword(s):  
Carbon Dioxide ◽  
Silver Chloride ◽  
Atomic Weight ◽  
Special Method ◽  
Its Analysis ◽  
A Current ◽  
Sulphuretted Hydrogen

Our attention has been directed for some time to a new determination of the atomic weight of manganese. This communication gives a succinct account of the results of the preliminary stages of such an inquiry, and although the further progress of the investigation may reveal some errors, still we feel convinced the final numbers can in no way differ materially from the present values, and therefore further delay in publication is unnecessary. The atomic weight of manganese has been determined by many chemists, but the resulting values vary considerably according to the special method selected. The results of the different investigators may be divided into two classes—those giving approximately 55 as the number, and those making it about 54. To the former class belong Turner, Berzelius, and Dumas, all of whom use the same method, viz., the determination of the silver chloride yielded by a weighed amount of chloride of manganese. Turner also made determinations from the analysis of the carbonate, and from the conversion of the monoxide into sulphate. Von Hauer used the same method as that employed by him in the determination of the atomic weight of cadmium, viz., the reduction of manganous sulphate to sulphide by ignition in a current of sulphuretted hydrogen. It is probable that this method is not very trustworthy, as, according to Schneider, the sulphide may be contaminated by oxysulphide. Schneider and Rawack belong to the second class of observers, the former employing the oxalate, and from its analysis calculating the atomic weight by deducting the weight of water and carbon dioxide obtained. Rawack, whose experiments were conducted in Schneider’s laboratory, weighed the water obtained by reducing manganoso-manganic oxide to manganous oxide.

Do centers of origin have a center?

Paleobiology ◽  
1981 ◽  
Vol 7 (3) ◽  
pp. 305-307 ◽  
Author(s):  
John C. Briggs
Keyword(s):  
United States ◽  
North America ◽  
Southeastern United States ◽  
Important Criterion ◽  
Centers Of Origin ◽  
Single Region ◽  
Evolutionary Radiation ◽  
A Current ◽  
Considerable Intensity

A current question being debated with considerable intensity is whether or not certain geographic areas act as centers of evolutionary radiation and supply species to other areas that are less active or less effective in an evolutionary sense. Darwin (1859) was the first to write about centers of origin which he called “single centers of creation.” He argued that each species was first produced within a single region and that it subsequently migrated from that area as far as its powers of migration and subsistence under past and present conditions permitted. Adams (1902), in discussing the influence of the southeastern United States as a center of distribution for the flora and fauna of North America, provided a series of criteria for the determination of “centers of dispersal.” His first, and evidently most important criterion was the location of “the greatest differentiation of a type.”

Study of the residual imperfections using methods of probability theory

2021 ◽  
Vol 87 (9) ◽  
pp. 44-49
Author(s):  
D. A. Kuzmin
Keyword(s):  
Probability Theory ◽  
Generalized Equation ◽  
Structural Elements ◽  
Non Destructive Testing ◽  
Operational Control ◽  
Destructive Testing ◽  
Control Procedures ◽  
Non Destructive ◽  
A Current

Discontinuities in the products that occur during manufacture, mounting or upon operation can be missed during non-destructive testing which do not provide their complete detectability at a current level of the technology. Therefore, it is necessary to take into account that certain structural elements may have discontinuities of significant dimensions. We present the results of using the methods of probability theory in studying the residual imperfections that remains in the structure after non-destructive control and repair of the previously identified defects. We used the results of operational control of units carried out by ultrasonic and radiographic methods. We present a method for determining a multifactorial coefficient that takes into account the detectability of defects, the number of control procedures and the errors in the instrumentation and methodological support, as well as a generalized equation for the probability distribution of detecting discontinuities. The developed approach provides assessing of the level of damage to the studied objects, their classification proceeding from the quantitative data and determination of the values of postulated discontinuities for deterministic calculations. The results obtained can be used to improve the methods of monitoring NPP facilities.

In-line single-phase extraction for direct determination of total iron in oils using CdTe quantum dots and a flow-batch system

2015 ◽  
Vol 7 (18) ◽  
pp. 7707-7714 ◽  
Author(s):  
Marcelo B. Lima ◽  
Stéfani Iury E. Andrade ◽  
Inakã S. Barreto ◽  
Mário César U. Araújo
Keyword(s):  
Quantum Dots ◽  
Single Phase ◽  
Direct Determination ◽  
Total Iron ◽  
Cdte Quantum Dots ◽  
Phase Extraction ◽  
Batch System ◽  
System P ◽  
Novel Method

In this work, a novel method for direct determination of total iron in viscous samples is presented.

Sign in / Sign up

Export Citation Format

Share Document