Fabrication process and properties of Cu-coated carbon fiber reinforced Al matrix composites

2020 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Carbon Fiber ◽  
Fabrication Process ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Carbon Fiber Reinforced ◽  
Al Matrix Composites ◽  
Coated Carbon ◽  
Al Matrix

The Effect of Aluminum Content on TiO2 Coated Carbon Fiber Reinforced Magnesium Alloy Composites

2014 ◽  
Vol 488-489 ◽  
pp. 30-35 ◽  
Author(s):  
Cun Juan Xia ◽  
Ming Liang Wang ◽  
Hao Wei Wang ◽  
Cong Zhou
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Interfacial Microstructure ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Alloy Matrix ◽  
Casting Technique ◽  
Al Content ◽  
Carbon Fiber Reinforced ◽  
Coated Carbon

The interface between the reinforcement and the matrix is significant to metal matrix composites. The effect of aluminum (Al) content on interfacial microstructure and mechanical properties of TiO2coated carbon fiber reinforced magnesium matrix composites by squeeze casting technique have been studied (C/Mg). Mg-2wt%Al and AZ91D were used as alloy matrix. The obtained results indicate that the carbon fibers in both kinds of composites are well protected by TiO2coating, without any interfacial brittle carbide phase observed. The flexural strength of Cf-TiO2/AZ91D (1009MPa) composites is 26.5% lower than that of Cf-TiO2/Mg-2Al (1277MPa) composites. The lath-shaped precipitates of Mg17Al12in AZ91D composites lead to the mechanical properties decrease.

Graphene oxide modified carbon fiber reinforced epoxy composites

2020 ◽  
Vol 40 (5) ◽  
pp. 415-420 ◽  
Author(s):  
Yasin Altin ◽  
Hazal Yilmaz ◽  
Omer Faruk Unsal ◽  
Ayse Celik Bedeloglu
Keyword(s):  
Graphene Oxide ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Spray Coating ◽  
Sem Analysis ◽  
Epoxy Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Quick Method ◽  
Carbon Fiber Reinforced

AbstractThe interfacial interaction between the fiber and matrix is the most important factor which influences the performance of the carbon fiber-epoxy composites. In this study, the graphitic surface of the carbon fibers was modified with graphene oxide nanomaterials by using a spray coating technique which is an easy, cheap, and quick method. The carbon fiber-reinforced epoxy matrix composites were prepared by hand layup technique using neat carbon fibers and 0.5, 1 and 2% by weight graphene oxide (GO) modified carbon fibers. As a result of SEM analysis, it was observed that GO particles were homogeneously coated on the surface of the carbon fibers. Furthermore, Young's modulus increased from 35.14 to 43.40 GPa, tensile strength increased from 436 to 672 MPa, and the elongation at break was maintained around 2% even in only 2% GO addition.

Carbon Fiber Reinforced Silicon Carbide Ceramic Matrix Composites

2020 ◽  
pp. 877-911
Author(s):  
Andi Udayakumar ◽  
M. Rizvan Basha ◽  
Sarabjit Singh ◽  
Sweety Kumari ◽  
V. V. Bhanu Prasad
Keyword(s):  
Silicon Carbide ◽  
Carbon Fiber ◽  
Ceramic Matrix Composites ◽  
Ceramic Matrix ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Silicon Carbide Ceramic ◽  
Carbon Fiber Reinforced
Sign in / Sign up

Export Citation Format

Share Document