Roping and Intergranular Corrosion of 430 Stainless Steel

2009 ◽  
pp. 348-348-8 ◽  
Author(s):  
E. A. Parker
Keyword(s):  
Stainless Steel ◽  
Intergranular Corrosion ◽  
430 Stainless Steel

Experimental Investigation of Parameters and its Effect on IGC Attack in Ferritic Stainless Steel 430 Weldments

2016 ◽  
Vol 854 ◽  
pp. 10-17 ◽  
Author(s):  
G. Rajamurugan ◽  
P. Mahendiran
Keyword(s):  
Stainless Steel ◽  
Automotive Industry ◽  
Intergranular Corrosion ◽  
Oil And Gas ◽  
Corrosion Damage ◽  
Gas Tungsten Arc ◽  
Corrosion Studies ◽  
430 Stainless Steel ◽  
Corrosion Problem ◽  
Aisi 430

Corrosion is a natural occurring phenomenon which exists as a part of our everyday life. Generally stainless steel is having good corrosion resistance which undergo some specific type of corrosion. Corrosion problem in stainless steel has a huge economic and environmental impact on virtually all facts of world’s infrastructure, from highways, bridges, and buildings to oil and gas, chemical processing, and finally it play an ever increasing role in the largest industry in the world is food industry and automotive industry. The corrosion problem is quite costly and it has no easy solution so large amount of money is utilized to analyse the corrosion damage and also to replace the corroded components. The focus of this paper is to investigate the intergranular corrosion studies of industrially important stainless steel of AISI 430 by two different corrosive solutions were 40% Nitric acid (ASTM-A262-Practice C) and copper – copper sulphate 50% Sulphuric acid (ASTM-A262-Practice E) of Gas tungsten Arc welded Metal which were weighted and immersed in test solutions. After immersion, these weldments were removed, washed, and then weighted to determine the weight loss. The analysis of experimental data obtained on intergranular corrosion and the micrographs by Scanning Electron microscope were carefully analysed, monitored, and revealed to study the behaviour of intergranular corrosion of AISI 430, Stainless steel weldments.

Microstructure and wear of FeCrC, SiC and B4C coated AISI 430 stainless steel

2019 ◽  
Vol 61 (2) ◽  
pp. 173-178 ◽  
Author(s):  
Ali Kaya Gür ◽  
Tülay Yildiz ◽  
Nida Kati ◽  
Sinan Kaya
Keyword(s):  
Stainless Steel ◽  
430 Stainless Steel ◽  
Aisi 430

NIROSTA 4429

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
High Nitrogen ◽  
Temperature Performance ◽  
Pitting Corrosion Resistance

Abstract Nirosta 4429 is a low-carbon, high-nitrogen version of type 316 stainless steel. The low carbon imparts intergranular corrosion resistance while the nitrogen imparts both higher strength and some increased pitting corrosion resistance. It is recommended for use as welded parts that need not or cannot be annealed after welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-787. Producer or source: ThyssenKrupp Nirosta.

SANDVIK 5R75

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance

Abstract Sandvik 5R75 is a molybdenum-containing austenitic stainless steel with titanium added to prevent intergranular corrosion by tying up the carbon. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-777. Producer or source: Sandvik Steel Company. Originally published March 2000, corrected November 2000.

CRUCIBLE 26-1

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
High Chromium ◽  
Furnace Melting ◽  
Chromium Stainless Steel

Abstract Crucible 26-1 is a fully ferritic, titanium-stabilized, high-chromium stainless steel characterized by outstanding resistance to pitting and stress corrosion in chloride-containing environments. The steel is weldable and very resistant to intergranular corrosion after welding. It is produced by electric-furnace melting and AOD (Argon-Oxygen Deoxidation) refining. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-306. Producer or source: Crucible Stainless Steel Division, Colt Industries.

ALZ 321

Alloy Digest ◽  
2001 ◽  
Vol 50 (4) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating

Abstract ALZ 321 is an austenitic stainless steel with good cold formability, corrosion resistance, toughness, and mechanical properties. The addition of titanium improves the resistance to intergranular corrosion in welds and slower cooling sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: SS-821. Producer or source: ALZ nv.

Sign in / Sign up

Export Citation Format

Share Document