The Effects of the Configuration of a Weld-reconstituted Compact Tension Specimen on Fracture Toughness Determination

2009 ◽  
pp. 436-436-15 ◽  
Author(s):  
F De Backer ◽  
F Gutiérnez-Solana
Keyword(s):  
Fracture Toughness ◽  
Compact Tension ◽  
Compact Tension Specimen ◽  
Tension Specimen

Influence of Sulfur Content on the Fracture Toughness Properties of 2 1/4 Percent Cr-1 Percent Mo Steel

1976 ◽  
Vol 98 (2) ◽  
pp. 135-142 ◽  
Author(s):  
J. F. Copeland
Keyword(s):  
Fracture Toughness ◽  
Sulfur Content ◽  
Detrimental Effect ◽  
Crack Opening ◽  
Analytical Techniques ◽  
Compact Tension ◽  
Compact Tension Specimen ◽  
Tension Specimen ◽  
Microvoid Coalescence ◽  
Opening Displacement

The effects of sulfur content on the fracture toughness properties of 2 1/4Cr-1 Mo steel were evaluated at test temperatures above, at, and below the nil ductility transition temperature (NDTT) of −23°C (−10°F). Small, 12.7-mm (0.5-in.) thick compact tension specimen results were combined with J-integral, Equivalent Energy, and Crack Opening Displacement analytical techniques to provide KIc results up to 22°C (72°F). It was found that the sulfur content of this steel has a large detrimental effect on KIc at the NDTT and above, where microvoid coalescence is the fracture mode. Sulfur has no significant effect at −73°C (−100°F) where cleavage occurs. These results also indicate that the higher Charpy V-notch energy at NDTT, shown by lower sulfur steels, is translatable into increased fracture resistance.

Comparison of J-Integral Values and J-R Curves Between Carbon Steel Compact Tension Specimen and Pipe Specimen

2004 ◽  
Author(s):  
Masahiro Takanashi ◽  
Satoshi Izumi ◽  
Shinsuke Sakai ◽  
Naoki Miura
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Crack Initiation ◽  
Compact Tension ◽  
Compact Tension Specimen ◽  
Small Scale ◽  
Outer Diameter ◽  
J Integral ◽  
Tension Specimen ◽  
Elastic Plastic

In the present study, the transferability of elastic-plastic fracture toughness from a small-scale to a large-scale specimen was experimentally confirmed for carbon steel pipe with mild toughness. Fracture toughness tests were carried out on a pipe specimen 318.5 mm in outer diameter, 10.3 mm in thickness and having a through-wall crack, and also on a compact tension specimen 9.7mm in thickness, 25.4 mm in width, that had been cut out from the pipe specimen. Test results indicated the J-integral value of the pipe specimen at the crack initiation to be nearly twice that of the CT specimen. Finite element analysis conducted on the two specimens indicated this difference to arise primarily from the constraint near the crack front. Discussion was also made of the effects of crack orientation on elastic-plastic fracture toughness of CT specimens. The J-integral value at crack initiation in the specimen whose crack direction coincided with the pipe axial was found to be almost 54 % more than for specimens whose crack direction was circumferential.

Sign in / Sign up

Export Citation Format

Share Document